• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.205-211
• /
• 2011

As the increase in maritime traffic and leisure, the marine accident risk has increased in the domestic coast. In this study, the cause and the environment of domestic marine accidents from 1990 to 2009 have been investigated and analyzed by using the statistics issues of Korean Maritime Safety Tribunal. Based on the analysis of most domestic marine accidents such as engine damage, collision, capsizing of small vessels, we propose how to use mobile telecommunication terminals for preventing marine accidents and the best countermeasures.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.555-560
• /
• 2005

Recently, many control systems are replaced with digital control systems in an effort to optimize the overall performance. In order to operate these systems efficiently, the conventional point-to-point connection method must be changed to the signal exchange via a communication network. This paper investigates the technical feasibility of the crane system using CAN protocol which is a part NMEA 2000 by implementing a network-based control system emulating the crane control system.

• Journal of Navigation and Port Research
• /
• v.33 no.4
• /
• pp.255-261
• /
• 2009

Prediction of the stability for ships is very complex in reality. In this paper, risk based approach is applied to predict the probability of capsize for a certified ship, which is effected by the forces of sea especially the wave loading Safety assessment and risk analysis process are also applied for the probabilistic prediction of stability for ships. The probability of shipsencountering different waves at sea is calculated by the existed statistics data and risk based models. Finally, ship capsizing probability is calculated according to single degree of freedom(SDF) rolling differential equation and basin erosion theory of nonlinear dynamics. Calculation results show that the survival probabilities of ship excited by the forces of the seas, especially in the beam seas status, can be predicted by the risk based method.

• Journal of Navigation and Port Research
• /
• v.28 no.4
• /
• pp.323-331
• /
• 2004

This paper introduces a novel approach that can provide the three dimensional information about the movement of a spreader by using two CCD cameras and a laser distance measuring unit in order to derive ALS (Automatic Landing System) in the crane used at a harbor. So far a kind of 2D Laser scanner sensor or laser distance measuring units are used as comer detectors for the geometrical matching between the spreader and a container. Such systems provide only two dimensional information which is not enough for an accurate and fast ALS. In addition to this deficiency in performance, the price of the system is too high to adapt to the ALS. Therefore, to overcome these defects, we proposed a novel method to acquire the three dimensional spreader information using two CCD cameras and a laser distance measuring unit. To show the efficiency of proposed method, real experiments are performed to show the improvement of accuracy in distance measurement by fusing the sensory information of the CCD cameras and a laser distance measuring unit.

• IE interfaces
• /
• v.20 no.4
• /
• pp.469-478
• /
• 2007

Rail transportation terminals play an important role in inland transportation systems, because the operation productivity in the terminals significantly influences the efficiency of the whole transportation systems. This paper addresses a design method of a real rail terminal that satisfies a pre-specified throughput capacity. In order to construct high performance rail terminal, it is shown how design parameters can be estimated systematically. Examples of the design parameters are the number of transshipment tracks, the number of rail cranes, and the number of internal trucks. These design parameters are estimated by using simple equations and the validity of the values of these parameters are tested by using simulation. Furthermore, some iterative correction procedure, which uses the simulation technique and the equations alternately, are proposed.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.447-452
• /
• 2008

In this paper, the automatic depth control system and the collision avoidance system of the Manta UUV have been established in vertical and horizontal plane. The PID control theory and the Fuzzy theory are adopted in this system. The 6-DOF MMG model had been established by theoretical calculations and captive model test results. The depth control simulation results have been fully presented. The collision risks of the UUV had calculated by the fuzzy theory with the virtual sonar system. Finally, the automatic depth control system and the collision avoidance simulation system of Manta UUV have been fully developed and simulated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.75-76
• /
• 2007

A mis-handling of the ship operators show high rate among the whole marine accidents. Since the port conditions have been getting worse. also as her size and speed increase, collision risk has been increased so that ship needs the automatic control system for collision. From that purpose, this research has been proceeded. The research has based on the MMG mathematical model, used Surge-Sway-Yaw motion equation, the information from the position and estimated time of collision point (DCPA and TCPA) to determine the collision risk with Fuzzy theory. To verify this system, ship was simulated when the ship encountered multitude of ships around the coast. The simulation result shows good application in avoiding ship collisions around the coast.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.245-254
• /
• 1999

This paper aims to derive the strategies for the container terminal in Pusan. So it has focused on analyzing the current conditions of Pusan container terminal while evaluating the difficulties arising from the existing facilities/equipment and the operating system in the Pusan Korea Container Terminal through the workers at the container terminal and at off-dock CY. The object of this study is to assist the existing terminals to operate the facilities/equipment reasonably and to contribute shaping the ports policy which will be the basis of constructing new ports that will remain competitive while maintaining superiority over the ports in northeast area. According to the analysis 68% of the supplier answered that their terminal services which are the most important factor in running a terminal were superior to the other while only 28% of the user answered that they thought the current services were superior. For the areas of supplementing the terminal the people working at the terminal answered in the order of business operation equipment the number of berth service and management ability while the user answered in the order of service computer system transportation system and equipment. According to the regression analysis it became clear that there should be more effort toward improving or supplementing the facility scale facility usage charge transportation facilities which will assist in developing competitiveness of the terminal. It was also noted that management ability and business ability were mentioned as the important factors in operating a terminal.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.

• Journal of Navigation and Port Research
• /
• v.28 no.9
• /
• pp.791-798
• /
• 2004

Since world container throughput continues to grow, the main issues facing decision-makers at port container terminals are how to expand the existing container terminals and construct new container terminals. Simulations can be used in the decision making process tools due to its ease and ability to reflect the real world system. The object-oriented approach provides for both reusability and modularity that best fits these requirements. In this paper, the object-oriented approach to modeling and simulating general container terminals is presented. Simulation tools based on Visual C++ provide a user-friendly input and output environment through the use of an object class-library. This paper also presents the case study of a simulation of a real container terminal i. Pusan, Korea