• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.236-243
• /
• 2009

This study was conducted to develop a japonica-type rice cultivar with brown planthopper (BPH) resistance using DNA markers. A doubled haploid (DH) population consisting of 120 pure-lines was established by anther culture of $F_1$ hybrids between 'Samgang', a Tongil type BPH resistance cultivar, and 'Nagdong', a japonica cultivar. To determine the map position of genes responsible for BPH resistance in rice, a genetic map was constructed based on 120 DH lines. A total of 162 molecular markers were classified into 12 linkage groups, covering 1,884 Kosami centimorgan (cM) with an average of 11.6 cM. Five QTLs (qBPR3, qBPR6, qBPR7, qBPR8, and qBPR12) associated with BPH resistance were identified and mapped on chromosomes 3, 6, 7, 8, and 12, respectively, using the genetic map constructed in this study. To analyze the relationship between BPH resistance and agronomic traits, a total of eight QTLs related to the agronomic traits were detected on 12 rice chromosomes. In an analysis of relationships, three QTLs (qBPR3, qBPR7, and qBPR8) showed a linkage with tested agronomic traits. A QTL (qBPR3) located on chromosome 3 (RM282-3023) was closely linked to culm length (qCL3). The QTL (qBPR8) for BPH resistance on the short arm of chromosome 8 also overlapped the region detected in culm length (qCL8).

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.294-299
• /
• 2010

Clay-loaded polypropylene (PP) nanocomposites were fabricated via melt-compounding of two molecular weight ($M_w$) PPs (140 and 410 kg/mol) and octadecylammine-treated clay (C18MMT), with the assistance of maleic anhydride-grafted PP(PP-MAH), respectively, at $170^{\circ}C$ and $190^{\circ}C$. At both melt-compounding temperatures, the low-$M_w$ PP tends to easily diffuse into silicate layers, especially in the presence of the mobile PP-MAH, resulting in a marked increase in silicate layer spacing (above 58 $\AA$), when compared to 27 $\AA$ in the high-$M_w$ PP-based system. Due to relatively lower melt-viscosity of the low-$M_w$ PP-based system, however, there existed quasi-stacked clay aggregates with a thickness of 60~80 nm, while the high-$M_w$ PP-based nanocomposites showed relatively homogeneous dispersion of clays. The different morphologies are mainly related to changes in the viscoelastic properties of PPs, dependent on the processing temperature and their $M_{w}s$. The slight differences in nanocomposites induce discernible crystallization and mechanical behaviors. High-$M_w$ PP-based nanocomposites containing 1~3 wt% C18MMT showed improvement in both tensile strength and modulus, while maintaining the inherent ductility of pure PP.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1306-1312
• /
• 2018

The Mn-doped copper nitride ($Cu_3N$) films with Mn concentration of 2.0 at. % have high crystallinity and uniform surface morphology. We found that the as-synthesized Mn-doped $Cu_3N$ films show suitable optical absorption in the visible region and the band gap is ~1.48 eV. A simple photodetector based on Mn doped $Cu_3N$ films was firstly fabricated via magnetron sputtering method. The fabricated device with doping of Mn demonstrated high photocurrent response and fast response shorter than 0.1 s both for rise and decay time superior to the pure $Cu_3N$. Furthermore, the energy levels of Mn-doped Cu3N matched well with ITO and Ag electrode. The excellent photoelectric properties reflect a good balance between sensitivities and response rate. Our investigation reveals the excellent potential of Mn-doped $Cu_3N$ films for application of photodetectors.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.60 no.8
• /
• pp.390-395
• /
• 2017

Background and Objectives With increasing frequency of car accidents, patients of dizziness caused by car accidents are also increasing. Various types of dizziness or vertigo can occur from car accidents depending on different injury mechanisms. Since accurate diagnosis is important for providing proper treatments, we evaluated clinical characteristics related to vestibular function of patients with dizziness caused car accidents. Subjects and Method In this retrospective case review study that runs from January 2011 to March 2013, a total of 82 patients with dizziness following car accident were enrolled consecutively. We analyzed the final diagnosis of dizziness according to different mechanisms of injury during car accident through clinical record review. Patients who developed dizziness within one month of car accident were included, excluding those who had temporal bone fracture and previous history of dizziness. Results Of the different types observed, 36.6% was head injury, 24.4% whiplash injury, 3.7% complex injury, 2.4% others and the rest was unknown. In the final diagnosis, the different types included 36.6% benign paroxysmal positional vertigo (BPPV), 23.2% unclassifiable dizziness, 18.3% cervical vertigo, 7.3% labyrinthine concussion, 3.7% BPPV with labyrinthine concussion and the rest was others. Of the different types of dizziness symptoms, 58.5% was headache, 45.1% was audiologic symptoms, and others included earfullness, tinnitus and hearing disturbance. Tinitogram and pure tone audiogram results show that 2.9% (27 people) of patients have tinnitus and 7.3% (6 people) have hearing disturbance. Conclusion An accurate diagnosis and timely management would be very important in forming a proper approach for post traumatic vertigo patients.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.29-38
• /
• 2004

In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (T_g) and the melting temperature (T_m) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.574-581
• /
• 2022

Nanofibers comprising reduced graphene oxide (rGO) and Mo₂C/Mo₂N nanoparticles (Mo₂C/Mo₂N rGO NFs) were prepared for a functional interlayer of Li-S batteries (LSBs). The well-dispersed Mo₂C and Mo₂N nanoparticles in the nanofiber structure served as active polar sites for efficient immobilization of dissolved lithium polysulfide. The rGO nanosheets in the structure also provide conductive channels for fast ion/electron transport during charging-discharging and ensured reuse of lithium polysulfide during redox reactions through a fast charge transfer process. As a result, the cell assembled with Mo₂C/Mo₂N rGO NFs-coated separator and pure sulfur electrode (70 wt% of sulfur content and 2.1 mg cm^-2 of sulfur loading) showed a stable discharge capacity of 476 mA h g^-1 after 400 charge-discharge cycles at 0.1 C. Furthermore, it exhibited a discharge capacity of 574 mA h g^-1 even at a high current density of 1.0 C. Therefore, we believe that the proposed unique nanostructure synthesis strategy could provide new insights into the development of sustainable and highly conductive polar materials as functional interlayers for high performance LSBs.

• Korean Journal of Audiology
• /
• v.24 no.1
• /
• pp.29-34
• /
• 2020

Background and Objectives: Bilateral microphones with contralateral routing of signal (BiCROS) hearing aid is an option for hearing rehabilitation in individuals with asymmetric sensorineural hearing loss (ASNHL). The clinical factors influencing the trial and purchase of BiCROS were investigated. Subjects and Methods: We reviewed the medical records of 78 patients with ASNHL who were recommended to use BiCROS and analyzed the demographic and audiological factors influencing the trial and purchase of BiCROS. Results: Among the 78 patients, 52 (66.7%) availed of the free BiCROS trial and 21 (26.9%) purchased BiCROS. The mean pure tone audiometry (PTA) air conduction (AC) threshold of the better- and worse-hearing ears were 44.2±12.8 dB and 90.7±22.5 dB HL, respectively. The decision for trial or purchase of BiCROS was not influenced by age, sex, duration of hearing loss of the worse-hearing ear, or PTA AC threshold or speech discrimination score of both ears. The first and third quartiles of the PTA AC thresholds for the better-hearing ear of BiCROS buyers were 38.75 dB and 53.75 dB HL, respectively. The counterpart values for the worse-hearing ear were 72.50 dB and 118.75 dB HL, respectively. Conclusions: The clinical factors analyzed in this study were found to be irrelevant to the trial and purchase of BiCROS in patients with ASNHL. Nevertheless, the distribution range of the auditory thresholds of the subjects using BiCROS can be a useful basis for the counseling of patients with ASNHL and selection of candidates for BiCROS use.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.6
• /
• pp.5-16
• /
• 2022

In the case of domestic seismic design, deformation of structures and ground is reviewed through undrained condition analysis and applied to design and maintenance. However, when the ground undergoes dissipation after liquefaction due to a dynamic load such as an earthquake, additional displacement occurs and greater damage occurs. Therefore, it is necessary to additionally analyze the drained conditions, It is necessary to grasp the exact ground behavior such as calculating and reviewing the amount of subsidence of the ground that has undergone the loss process after an earthquake and apply it to design and maintenance together. Therefore, in this study, numerical analysis was performed assuming undrained and drained conditions by dividing pure sandy soil into loose soil with Dr=30% and high-density soil with Dr=70%. In particular, when a dynamic load such as an earthquake is applied, considering the drained conditions of the ground, the settlement amount and the pore water pressure ratio of loose and dense ground are compared, This study focused on comparative analysis of settlement amount and pore water pressure ratio in the process of ground loss after an earthquake. As a result, the amount of subsidence during the dissipation process was 30 to 60 times greater than that of the earthquake.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.100-116
• /
• 2023

The Sinamsa Temple was built in the late Goryeo Dynasty and a gilt-bronze seated Buddha is enshrined in Geungnakjeon hall in the precinct. Various damages occurred in the gilt layer of the Buddha, such as peeling of the gilt layer and deteriorating gloss. In the study, the conservation conditions of the inside and outside on the statue were accurately investigated, and the making technique was interpreted through the material characteristics and non-destructive diagnosis of the statue. As a result, it is estimated that gold-gilding layer is pure gold, coloration pigment of black is carbon, green is malachite, atacamite and verdigris, red is red lead and cinnabar, respectively. In the deterioration evaluation, peeling, cracking, break out and exfoliation of the gilt layer are confirmed as damages, but the conservation condition is relatively wholesome. However, the gloss of the gilt layer is calculated to be wider in the poorer part than the maintenance part. The ultrasonic velocity of the statue was calculated to be 1,230 to 3,987 (mean 2,608) m/s and showed a relatively wide range. In infrared thermography, peeling was not confirmed, and no special bonding marks were found. In endoscope, some biological damage and corrosion were observed on the surface of the internal metal, and sealed artifacts were identified. Manufacturing technique based on the study, it is considered that the gilt-bronze seated Buddha was cast at once, and the mold was inverted to inject molten metal.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.216-222
• /
• 2008

Background: Prosthetic annuloplasty rings are used for the reconstruction of the mitral valve annulus. However, there is controversy over the best ring to use for reconstruction. In this study, we evaluated the long term result of using a Teflon felt strip as an alternative to commercial rings. Material and Method: From 1996 to 2007, we enrolled 47 patients with pure mitral regurgitation greater than grade III. All patients had an ejection fraction of 40% or more. Patients with congenital heart disease or other valvular heart disease were excluded from this study. They were divided into two groups; the commercial ring group (Group CR) and the Teflon felt ring group (Group TF). Result: There was no mortality. The postoperative echocardiography showed no significant change in the overall ejection fraction (from $58.0{\pm}11.2%\;to\;42.8{\pm}8.4%$). There were no significant differences between the two groups with regard to morbidity, the reoperation rate and recurrence of mitral regurgitation greater than grade II. Conclusion: The long term results from this study showed that posterior mitral annuloplasty using Teflon felt had similar results compared to annuloplasty using commercial rings.