• 제목/요약/키워드: Pure water

검색결과 1,125건 처리시간 0.024초

순산소 고율포기시스템 및 침지식 MBR융합공정에서 Biofouling 제어 및 원인물질 규명에 관한 연구 (The Study of Biofouling Control and Cause Material in Hybrid Process of Pure Oxygen and Submerged Membrane Bio-reactor)

  • 이상민;김미형
    • 한국물환경학회지
    • /
    • 제27권1호
    • /
    • pp.44-53
    • /
    • 2011
  • Membrane bio-reactor (MBR) has several advantages over the conventional activated sludge process, including a high biomass, low sludge production, and better permeate quality. Therefore, the MBR have gained popularity for municipal and industrial wastewater treatment. However the MBR usually were used for sewage and low streng th wastewater treatment because of membrane fouling problem and limitation of oxygen transfer into biomass. In this study, the hybrid process combining MBR and pure oxygen was tested for high strength organic wastewater treatment in the COD loading range from 2 to $10kgCOD/m^3{\cdot}day$. The hybrid process, membrane coupled pure oxygen high compact reactor (MPHCR), had been operated for one year and operation parameters, the effect of COD loading, MLSS concentration and the location of membrane module were studied for membrane fouling characteristic. Also membrane resistance test and the component of foulant was analyzed to investigate what is specific foulant in the MBR.

A Simple Method for the Preparation of Highly Pure Conjugated Linoleic Acid(CLA) Synthesized from Safflower Seed Oil

  • Kim, Young R.;Lee, Young H.;Park, Kyung A.;Kim, Jeong O.;Ha, Yeong L.
    • Preventive Nutrition and Food Science
    • /
    • 제5권1호
    • /
    • pp.10-14
    • /
    • 2000
  • A simple and rapid method was developed to prepare a large quantity of highly pure conjugated linoleic acid (CLA) chemically-synthesized from safflower seed oil (SSO). CLA-SSO(74.9% in purity) was synthesized from fresh SSO(79.9% of linoleic acid) by alkaline isomerization at 18$0^{\circ}C$. Urea(50g) and CLA-SSO (25g) were completely dissolved in ethanol (750ml) using a water bath(5$0^{\circ}C$) and followed by refluxing for 60 min. The resultant was cooled to room temperature and stored in a cold room (4$^{\circ}C$) for 24hrs. After removing the urea adduct by filtration, the filtrate was rotoevaporated under 4$0^{\circ}C$ and the residue was dissolved in hexane (200ml). The hexane extract was washed with distilled water (100ml$\times$3) and dried over sodium sulfate anhydrous. This urea treatment procedure was repeated three times. The purity of CLA recovered from the hexane extract was 95.0%. This method can be applied to prepare a large quantity of highly pure chemically-synthesized CLA (>0.5kg/a batch) from any plant oils containing high percentages (>70%) of linoleic acid.

  • PDF

탄소나노튜브를 적용한 나노유체의 비등 열전달계수 (Boiling Heat Transfer Coefficients of Nanofluids Using Carbon Nanotubes)

  • 이요한;정동수
    • 한국태양에너지학회 논문집
    • /
    • 제29권5호
    • /
    • pp.35-44
    • /
    • 2009
  • In this study, boiling heat transfer coefficients(HTCs) and critical heat flux(CHF) are measured on a smooth square flat copper heater in a pool of pure water with and without carbon nano tubes(CNTs) dispersed at $60^{\circ}C$. Tested aqueous nanofluids are prepared using multi-walled CNTs whose volume concentrations are 0.0001, 0.001, 0.01, and 0.05%. For dispersion of CNTs, polyvinyl pyrrolidone(PVP) is used in distilled water. Pool boiling HTCs are taken from $10kW/m^2$ to critical heat flux for all nanofluids. Test results show that the pool boiling HTCs of the nanofluids are lower than those of pure water in entire nucleate boiling regime. On the other hand, critical heat flux is enhanced greatly showing up to 200% increase at volume concentration of 0.001% CNTs as compared to that of pure water. This is related to the change of surface characteristics by the deposition of CNTs. This deposition makes a thin CNT layer on the surface and the active nucleation sites of heat transfer surface are decreased due to this layer. The thin layer acts as the thermal resistance and also decreases the bubble generation rate resulting in a decrease in pool boiling HTCs. The same layer, however, maintains the nucleate boiling even at very high heat fluxes and reduces the formation of large vapor canopy at near CHF resulting in a significant increase in CHF.

액체식품의 밀도예측을 위한 모델링 (Modeling for the Prediction of Liquid Food Density)

  • 최용희
    • 한국식품과학회지
    • /
    • 제20권2호
    • /
    • pp.133-139
    • /
    • 1988
  • 액체 식품의 밀도를 예측할 수 있는 모델을 온도와 그 식품의 주요성분의 조성의 함수로 발전시키기 위하여 액체식품의 주요성분을 다음과 같이 water, protein, fat, carbohydrate, fiber, ash등 6가지 성분으로 분류하였고, 다시 세분하면 16가지의 주요성분을 분리 준비하여 그중 분말로 준비된 시료는 증류수를 사용하여 3종류의 서로 다른 농도의 현탁액을 만들어서 volumetric pycnometer를 사용하여 $0^{\circ}C$에서 $100^{\circ}C$의 온도범위에서 밀도를 측정하였다. 측정된 값으로부터 주어진 온도에서 각 순수성분의 밀도를 계산하였으며 이때 순수한 성분의 밀도는 온도의 증가에 따라 1차 함수의 관계로 감소한다는 사실을 알게 되었다. 계산된 밀도값으로부터 $0^{\circ}C$에서 $100^{\circ}C$의 온도범위에서 각 순수성분의 밀도 예측 모델의 계수를 OPT subroutine을 사용하여 결정하였다. 그리하여 Table 14 혹은 Table 15에 나타난 식을 활용하여 주어진 온도와 조성에서 액체식품의 밀도를 예측할 수 있을 것으로 사료된다.

  • PDF

Sublayer assisted by hydrophilic and hydrophobic ZnO nanoparticles toward engineered osmosis process

  • Mansouri, Sina;Khalili, Soodabeh;Peyravi, Majid;Jahanshahi, Mohsen;Darabi, Rezvaneh Ramezani;Ardeshiri, Fatemeh;Rad, Ali Shokuhi
    • Korean Journal of Chemical Engineering
    • /
    • 제35권11호
    • /
    • pp.2256-2268
    • /
    • 2018
  • Hydrophilic and hydrophobic polyethersulfone (PES)-zinc oxide (ZnO) sublayers were prepared by loading of ZnO nanoparticles into PES matrix. Both porosity and hydrophilicity of the hydrophilic sublayer were increased upon addition of hydrophilic ZnO, while these were decreased for the hydrophobic sublayer. In addition, the results demonstrated that the hydrophilic membrane exhibited smaller structural parameter (S value or S parameter or S), which is beneficial for improving pure water permeability and decreasing mass transfer resistance. In contrast, a higher S parameter was obtained for the hydrophobic membrane. With a 2 M NaCl as DS and DI water as FS, the pure water flux of hydrophilic TFN0.5 membrane was increased from $21.02L/m^2h$ to $30.06L/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $14.98L/m^2h$, while the salt flux of hydrophilic membrane increased from $10.12g/m^2h$ to $17.31g/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $3.12g/m^2h$. The increment in pure water permeability can be ascribed to reduction in S parameter, which resulted in reduced internal concentration polarization (ICP). The current study provides a feasible and low cost procedure to decrease the ICP in FO processes.

가스 하이드레이트의 분광학적 연구 (Spectroscopic Studies of Gas Hydrates)

  • 김도연;이흔;서유택
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.615-617
    • /
    • 2005
  • [ $^{13}C$ ] NMR spectra were obtained for pure $CH_4$ hydrate in order to identify hydrate structure and cage occupancy of guest molecule. The NMR technique can provide both qualitative and quantitative hydrate characteristics. The moles of methane captured into pure $CH_4$ hydrate per mole of water were found to be similar to the full occupancy value. The overall results drawn from this study can be usefully applied to storage and transportation of natural gas.

  • PDF

Effect of Various Bleaching Agents on Discolored Nonvital Teeth.

  • Park, Sun-Ah;Hwang, In-Nam;Oh, Won-Mann
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.591.1-591
    • /
    • 2001
  • This study was performed to evaluate internal bleaching effect of various bleaching agent on discolored nonvital teeth. 40 Human teeth were intentionally discolored with erythrocytes of human blood and randomly divided into 4 groups: 10% carbamide peroxide gel (Opalescence, Ultradent, U.S.A.); 15% carbamide peroxide gel; sodium perborate (Duksan pure chemical Co., Korea) with distilled water; sodium perborate with 30% hydrogen peroxide (Duksan pure chemical Co., Korea).(omitted)

  • PDF

p-HP 고분자 LB초박막의 제작과 전기적 특성 (Electrical Properties and Fabrication of Ultra-thin Films using p-HP Polymer)

  • 유승엽;정상범;박재철;권영수
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권7호
    • /
    • pp.287-291
    • /
    • 2002
  • We fabricated the crosslinked films using p-hexadecoxyphenol (p-HP), which is amphiphilic and can form polyion complexes with formaldehyde at the air-water interface. The behavior of polyion complexation at the air-water interface and the surface structure of LB films was investigated by Brewster angle microscope(BAM) and scanning Maxwell-stress microscope (SMM), respectively. Also, the electrical properties for crosslinking in phenol-formaldehyde LB films were investigated by measuring conductivity and dielectric constant. The conductivities of p-HP LB films are as follows: heat-treatment of 1% formaldehyde subphase(3.76$\times$10$^{-15}$ ~4.76$\times$10$^{-1}$5[S/cm])$\times$10$^{-14}$ ~1.74$\times$10$^{-14}$ [S/cm]). Also, relative dielectric constants of p-HP LB films were reduced from 6.76~7.84 (pure water) to 2.97~3.25 (heat-treatment of 1% formaldehyde subphase))

투과증발 PAA-PVA막을 통한 초산-물 혼합물의 투과거동에 관한 연구 (A Characterization of Permeation Behavior of Acetic Acid-Water Mixtures Through Crosslinked PAA-PVA Membranes in Pervaporation Separation)

  • 김선우;염충균;임지원
    • 멤브레인
    • /
    • 제6권4호
    • /
    • pp.227-235
    • /
    • 1996
  • PVA의 수산화기와 PAA의 카르복실산기 사이의 반응에 의해 가교구조를 갖는 PAA-PVA 막을 제조하였으며 팽윤실험을 통해 순수물, 순수초산 그리고 이들의 혼합물하에서의 가교막들의 팽윤거동을 각각 살펴보았다. 90wt% 초산 수용액하에서의 팽윤실험에서 막에 PAA함량이 높을때 물의 팽윤거동이 초산보다 더 촉진됨이 관찰되었는데 이는 팽윤과정에서의 각 구성 성분간의 짝짓기(coupling) 결과로 사료되며 또한 막의 팽윤비와 가교밀도는 경쟁적으로 투과물의 투과거동에 서로 상반되게 영향을 끼침이 관찰이 되었다. 온도에 따른 투과속도의 Arrhenius 관계에서 구한 투과활성화에너지를 통해 투과성분의 투과거동을 분석하였다.

  • PDF