• Title/Summary/Keyword: Pure sciences

Search Result 788, Processing Time 0.03 seconds

A Study on Heat Transfer and Pressure Drop in Flow Boiling of Binary Mixtures in a Uniformly Heated Horizontal Tube (균일하게 가열되는 수평전열관내 냉매의 유동 비등열 전달과 압력 강하 특성에 관한 연구)

  • LIM, Tae-Woo;PARK, Jong-Un;KIM, Jun-Hyo
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.14 no.2
    • /
    • pp.177-190
    • /
    • 2002
  • An experimental study was carried out to make clear heat transfer characteristics in flow boiling of binary mixtures of refrigerants R134a and R123 in a uniformly heated horizontal tube. Experiments were run at a pressure of 0.6 MPa both for pure fluids and mixtures in the ranges of heat flux $10{\sim}50{kW/m}^2$, vapor quality 0~100% and mass flux 150-600 $kg/m^2s$. Heat transfer coefficients of mixtures were reduced compared to the interpolated values between pure fluids both in the low quality region where the nucleate boiling is dominant and in the high quality region where the convective evaporation is dominant. Total pressure drop during two-phase flow boiling in a horizontal tube consists of the sum of two components, that is, the frictional pressure drop and pressure drop due to acceleration. The frictional pressure drop is the most difficult component to predict, and makes the most important contribution to the total pressure drop. On the other hand, the acceleration pressure drop resulting from the variation of the momentum flux caused by phase change is generally small as compared to the frictional pressure drop. There is no significant difference in measured pressure drop between mixtures and pure fluids. The correlation of Martinelli and Nelson predicted most of the present data both for pure and mixed refrigerants within 30%.

Electrochemical Corrosion Characteristics of the Intermetallic Compound NiTi from Pure Metals (금속간 화합물 NiTi와 순금속 니켈 및 티타늄의 전기화학적 부식 특성)

  • Lee, Kyu Hwan;Shin, Myung Chul
    • Analytical Science and Technology
    • /
    • v.5 no.1
    • /
    • pp.97-101
    • /
    • 1992
  • Potentiodynamic corrosion tests were conducted to know the corrosion characteristics of the NiTi intermetallic compound composed of pure Ni and Ti in artificial saline. Tafel extrapolation and linear polarization technique show similar results. Corrosion current Icorr and corrosion rate was increased in the order of NiTi

  • PDF

Effects of Mixed Plantation on Growth and Biomass Yield of Two Common Plantation Trees of Bangladesh

  • Dutta, Shourav;Hossain, Mohammed Kamal
    • Journal of Forest and Environmental Science
    • /
    • v.33 no.1
    • /
    • pp.22-32
    • /
    • 2017
  • An experiment was set to assess the effect of mixed plantings on initial growth and biomass yield of two common plantation tree species of Bangladesh namely Acacia auriculiformis (A) and Gmelina arborea (G). Study was carried out in the nursery bed of the Seed Research Laboratory and Nursery of Institute of Forestry and Environmental Sciences, Chittagong University (IFESCU), Bangladesh during February to November, 2015. The treatments consisted of two pure planting plots (100% A and 100% G) and five mixed planting plots (50%A: 50%G, 35%A: 65%G, 25%A: 75%G, 65%A: 35%G and 75%A: 25%G) of these two species. In nursery, seedlings were raised in a randomized blocks with four replicates of seven treatment plots. Periodic increments on height (cm), collar diameter (cm) and leaf/phyllode number of the seedlings was taken in every month and continued up to 10 months. The growth and biomass yield of seedlings were measured 10 months after the first seed was emerged. The effects of mixed plantation on growth and biomass were compared to that of seedlings grown in pure plantation. At the age of 10 months it was found that G. arborea seedlings were significantly tallest (240.13 cm) when planted with A. auriculiformis in a proportion of 25%A: 75%G, whereas A. auriculiformis were tallest in the pure 100% A plot, with an average mean height of 135.36 cm. Maximum collar diameter (1.38 cm) was recorded for G. arborea in the mixed plots 75%A: 25%G. Fresh and dry weight of shoots and roots of the seedlings were found significantly (p<0.05) highest in 50%A: 50%G plot for G. arborea. G. arborea also showed highest quality index when mixed with A. auriculiformis in a proportion of 50:50, with an average value of 8.96. The results revealed a positive correlation between seedling growth and various planting patterns.

Evaluation of calcium, magnesium, vitamin D and some biomarker parameters levels in children with favsim disease in the Basrah Governorate-Iraq

  • Ashwaq A. Shenta;Khansaa S. Saud;Ali A. A. Al-Shawi;Mustafa F. Hameed
    • Journal of Applied Biological Chemistry
    • /
    • v.65 no.4
    • /
    • pp.329-335
    • /
    • 2022
  • Essential minerals are important for human health because they support biochemical reactions in metabolism and may play a role in the development of glucose-6-phosphate dehydrogenase deficiency (G6PD). We investigated the relationship between calcium, magnesium, urea, creatinine, total protein, glucose and vitamin D levels in G6PD deficiency in this study. The control group consisted of 40 people (23 females and 17 males) and the patient group consisted of 50 people (20 females and 30 males), all of whom were between the ages of (1-12 years). The findings revealed that the calcium level in patients, depending on sex factor, has a highly significant increase (p <0.0001) when compared to the control group, especially in children who are females rather than males who are affected by G6PD deficiency. In addition, the level of magnesium was found to be significantly different (p <0.0001) in children male patients when compared to the control group. On the other side, the level of total protein was found to be significantly high in children patients (p <0.01) when comparing with control group, and the levels of urea, creatinine and glucose were found to be highly significant increase (p <0.001) in patients when comparing to healthy groups, vitamin D levels were significantly lower (p <0.0001) with G6PD deficiency comparing to control group. In conclusion, the low and high significant associations between vitamin D, calcium, magnesium, urea, creatinine, and glucose indicate that more research is needed to better understand their roles in G6PD development.

Examination of the Impact of Substituting Germanium for Bismuth on the Energy Density and Electrical Conductivity of the Se60Ge40-xBix Alloy

  • Kareem Ali Jasim;Haider Sahi Hussein;Shaymaa Hashim Aneed;Ebtisam Mohammed Taqi Salman
    • Korean Journal of Materials Research
    • /
    • v.34 no.6
    • /
    • pp.267-274
    • /
    • 2024
  • In this study, four different samples of Se60Ge40-xBix chalcogenides glasses were synthesized by heating the melt for 18 h in vacuum Pyrex ampoules (under a 10-4 Torre vacuum), each with a different concentration (x = 0, 10, 15, and 20) of high purity starting materials. The results of direct current (DC) electrical conductivity measurements against a 1,000/T plot for all chalcogenide samples revealed two linear areas at medium and high temperatures, each with a different slope and with different activation energies (E1 and E2). In other words, these samples contain two electrical conduction mechanisms: a localized conduction at middle temperatures and extended conduction at high temperatures. The results showed the local and extended state parameters changed due to the effective partial substitution of germanium by bismuth. The density of extended states N(Eext) and localized states N(Eloc) as a function of bismuth concentration was used to gauge this effect. While the density of the localized states decreased from 1.6 × 1014 to 4.2 × 1012 (ev-1 cm-3) as the bismuth concentration increased from 0 to 15, the density of the extended states generally increased from 3.552 × 1021 to 5.86 × 1021 (ev-1 cm-3), indicating a reduction in the mullet's randomness. This makes these alloys more widely useful in electronic applications due to the decrease in the cost of manufacturing.

A circular economical application of eggshell waste as a bio-filler in the fabrication of gum Arabic composite film

  • Blessing A. Oredokun-Lache;Esther B. Ibrahim;Adekemi G. Oluwafemi;Georgina O. Erifeta;Sunday J. Josiah;Olarewaju M. Oluba
    • Food Science and Preservation
    • /
    • v.31 no.3
    • /
    • pp.394-407
    • /
    • 2024
  • The poultry industry faces disposal difficulty in waste, but recent advancements in material science and sustainability have enabled the innovative transformation of waste into valuable resources. In this study, eggshell (EC) was added as a bio-filler to gum Arabic (GA) to fabricate a GA-EC bio-composite film. Bio-composites containing 0.5 g (GA-EC0.5) and 1.0 g (GA-EC1.0) EC dispersed in 30 mL of 15% GA solution were fabricated and characterized using standard analytical techniques. The GA-EC0.5 composites showed significantly higher moisture content, transparency, water solubility, and water vapor permeability but lower tensile strength and thermal stability than GA-EC1.0. Following a post-harvest wrapping of tomato fruits with the GA-EC composite films and storage at 25±2℃ for 20 days, significant (p>0.05) reductions in weight loss, pH, lycopene content, and activities of polyphenol oxidase and pectin methylesterase compared to unwrapped fruits were recorded. Adding EC to GA has enabled the fabrication of composite films with improved mechanical, barrier, and thermal properties with potential application in the post-harvest storage of tomato fruits.

CONNECTIVITY BETWEEN MATHEMATICS AND SCIENCE CONCEPTS AND A PLAN FOR ORGANIZATION OF EDUCATIONAL PROGRAMS -FOCUSED ON MARGINALIZED LEARNERS

  • J.J. SEO;SANGWOOK WU;WANSEOK LEE
    • Journal of Applied and Pure Mathematics
    • /
    • v.5 no.1_2
    • /
    • pp.9-22
    • /
    • 2023
  • In this paper, the connection and convergence between mathematics and science (physics) concepts were investigated. In addition, methods to closely analyze the degree of mathematics and science (physics) learning were looked into. Furthermore, methods to express and analyze the learning states of individual learners were investigated and a plan to organize educational programs was sought.

Synthesis, characterization, and biological significance of mixed ligand Schiff base and alizarin dye-metal complexes

  • Laith Jumaah Al-Gburi;Taghreed H. Al-Noor
    • Analytical Science and Technology
    • /
    • v.37 no.4
    • /
    • pp.239-250
    • /
    • 2024
  • This study reports the synthesis of a bi-dentate Schiff base ligand (L), 7-(2-((2-formylbenzylidene) amino)-2-phenylacetamido)-3-methyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, prepared from phthalaldehyde and cephalexin antibiotic. The synthesized Schiff base ligand (L) and the secondary ligand alizarin (Az) are used to prepare the new complexes [M(Az)2(L)] and [Cr(Az)2(L)]Cl, where M = Mn(II), Co(II), Ni(II), Cu(II), and Zn(II). The mode of bonding of the Schiff base has been characterized by UV-Visible, FT-IR, Mass, 1H-, and 13C-NMR spectroscopic techniques, and micro elemental analysis (CHNS). The complexes were characterized using UV-Vis, FT-IR, molar conductance, magnetic moment, and thermal analysis (TG/DTG). The molar conductance data revealed that the complexes are non-electrolytes except for [Cr(L)(Az)2]Cl, which is an electrolytic type 1:1. The Schiff base and its complexes have been tested for their biological activity against two strains of bacteria and one fungus. When screened against gram-positive and gram-negative pathogens, the Az and L ligands and their complexes showed potential antimicrobial activity.

Genomic diversity and admixture patterns among six Chinese indigenous cattle breeds in Yunnan

  • Li, Rong;Li, Chunqing;Chen, Hongyu;Liu, Xuehong;Xiao, Heng;Chen, Shanyuan
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.32 no.8
    • /
    • pp.1069-1076
    • /
    • 2019
  • Objective: Yunnan is not only a frontier zone that connects China with South and Southeast Asia, but also represents an admixture zone between taurine (Bos taurus) and zebu (Bos indicus) cattle. The purpose of this study is to understand the level of genomic diversity and the extent of admixture in each Yunnan native cattle breed. Methods: All 120 individuals were genotyped using Illumina BovineHD BeadChip (777,962 single nucleotide polymorphisms [SNPs]). Quality control and genomic diversity indexes were calculated using PLINK software. The principal component analysis (PCA) was assessed using SMARTPCA program implemented in EIGENSOFT software. The ADMIXTURE software was used to reveal admixture patterns among breeds. Results: A total of 604,630 SNPs was obtained after quality control procedures. Among six breeds, the highest level of mean heterozygosity was found in Zhaotong cattle from Northeastern Yunnan, whereas the lowest level of heterozygosity was detected in Dehong humped cattle from Western Yunnan. The PCA based on a pruned dataset of 233,788 SNPs clearly separated Dehong humped cattle (supposed to be a pure zebu breed) from other five breeds. The admixture analysis further revealed two clusters (K = 2 with the lowest cross validation error), corresponding to taurine and zebu cattle lineages. All six breeds except for Dehong humped cattle showed different degrees of admixture between taurine and zebu cattle. As expected, Dehong humped cattle showed no signature of taurine cattle influence. Conclusion: Overall, considerable genomic diversity was found in six Yunnan native cattle breeds except for Dehong humped cattle from Western Yunnan. Dehong humped cattle is a pure zebu breed, while other five breeds had admixed origins with different extents of admixture between taurine and zebu cattle. Such admixture by crossbreeding between zebu and taurine cattle facilitated the spread of zebu cattle from tropical and subtropical regions to other highland regions in Yunnan.

Synthesis of Au Nanoparticles Functionalized 1D α-MoO3 Nanobelts and Their Gas Sensing Properties

  • Wang, Liwei;Wang, Shaopeng;Fu, Hao;Wang, Yinghui;Yu, Kefu
    • Nano
    • /
    • v.13 no.10
    • /
    • pp.1850115.1-1850115.10
    • /
    • 2018
  • A novel sensor material of Au nanoparticles (NPs) functionalized 1D ${\alpha}-MoO_3$ nanobelts (NBs) was fabricated by a facile lysine-assisted approach. The obtained $Au/{\alpha}-MoO_3$ product was characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and energy dispersive X-ray (EDX), and X-ray photoelectron spectra (XPS). Then, in order to investigate the gas sensing performances of our samples, a comparative gas sensing study was carried out on both the ${\alpha}-MoO_3$ NBs before and after Au NPs decoration by using ethanol vapor as the molecular probe. The results turned out that, after the functionalization of Au NPs, the sensor exhibited improved gas-sensing characteristics than the pure ${\alpha}-MoO_3$, such as response and recovery time, optimal operating temperature (OT) and excellent selectivity. Take for example 200 ppm of ethanol, the response/recovery times were 34 s/43 s and 5.7 s/10.5 s, respectively, while the optimal operating temperature (OT) was lower to $200^{\circ}C$ rather than $250^{\circ}C$. Besides, the functionalized sensor showed a higher response to ethanol at $200^{\circ}C$, and response was 1.6 times higher than the pure $MoO_3$. The mechanism of such improved sensing properties was interpreted, which might be attributed to the spillover effect of Au NPs and the electronic metal-support interaction.