• 제목/요약/키워드: Pure line

검색결과 301건 처리시간 0.029초

높은 Rayleigh 수에서 원형 실린더가 존재하는 사각형 실린더 내부의 자연대류에 관한 수치적 연구 (A numerical study of natural convection in a square enclosure with a circular cylinder for high Rayleigh number)

  • 유동훈;윤현식;하만영;김병수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2744-2749
    • /
    • 2008
  • Numerical calculations are carried out for the natural convection induced by temperature difference between a cold outer square cylinder and a hot inner circular cylinder for Rayleigh number of $Ra=10^7$. This study investigates the effect of the inner cylinder location on the heat transfer and fluid flow. The location of inner circular cylinder ($\delta$) is changed vertically along the center-line of square enclosure. The natural convection bifurcates from unsteady to steady state according to $\delta$. Two critical positions of ${\delta}_{C,L}$ and ${\delta}_{C,U}$ as a lower bound and an upper bound are ${\delta}_{C,L}=0.05$ and ${\delta}_{C,U}=0.18$, respectively. Within the defined bounds, the thermal and flow fields are steady state. When the inner cylinder locates at ${\delta}{\geq}{\delta}_{C,U}$, the space between the upper surface of inner cylinder and the top surface of the enclosure forms a relatively shallow layer where the natural convection characterized as the pure Rayleigh-Benard convection forms alternately the upwelling and downwelling plums, as a result that a series of cells known as Benard cells is derived.

  • PDF

Performance Analysis of Men's 110-m Hurdles using Rhythmic Units

  • Hong, Sung Hong;Ryu, Jae Kyun
    • 한국운동역학회지
    • /
    • 제28권2호
    • /
    • pp.79-85
    • /
    • 2018
  • Objective: This study aimed to create a strategic training method to enhance optimal athletic ability using information from 1H to 10H rhythmic units. Method: Top three world class athletes and three national winners of 110-m hurdle finals from the 2010 Daegu International Athletics Competition and 2017 National Athletics Championship, respectively, were selected. To analyze the kinematic variables, Dartfish 9.0 was used for two-dimensional analysis. Results: Regarding the interval time from the start to the finish line, the national athletes took less time during the pure acceleration phase (start to 1H) than the foreign athletes. The horizontal velocity increase was slower after 1H; the national athletes showed a lack of ability to accelerate at the interval phases. Moreover, the hurdle clearance time between phases was longer in the national athletes than in the foreign athletes and lacked consistency. Conclusion: The national athletes lacked the ability to accelerate at the transition, maximum rhythm, rhythm maintenance, and re-acceleration phases and showed a longer hurdle clearance time. If technical improvements and strategic training methods using rhythmic units are applied for hurdling motions, the national athlete's hurdling abilities, performance, and consistency could improve.

Imaging of a Defect in Thin Plates Using the Time Reversal of Single Mode Lamb Wave: Simulation

  • Jeong, Hyun-Jo;Lee, Jung-Sik;Bae, Sung-Min;Lee, Hyun-Ki
    • 비파괴검사학회지
    • /
    • 제30권3호
    • /
    • pp.261-270
    • /
    • 2010
  • This paper presents an analytical investigation for a baseline-free imaging of a defect in plate-like structures using the time-reversal of Lamb waves. We first consider the flexural wave (A0 mode) propagation in a plate containing a defect, and reception and time reversal process of the output signal at the receiver. The received output signal is then composed of two parts: a directly propagated wave and a scattered wave from the defect. The time reversal of these waves recovers the original input signal, and produces two additional side bands that contain the time-of-flight information on the defect location. One of the side band signals is then extracted as a pure defect signal. A defect localization image is then constructed from a beamforming technique based on the time-frequency analysis of the side band signal for each transducer pair in a network of sensors. The simulation results show that the proposed scheme enables the accurate, baseline-free detection of a defect, so that experimental studies are needed to verify the proposed method and to be applied to real structure.

다팽이관 기저막의 전기 전달선 모델링 (Electrical Transmission Line Modelling of the Cochlear Basilar Membrane)

  • 장순석
    • 대한의용생체공학회:의공학회지
    • /
    • 제14권2호
    • /
    • pp.125-136
    • /
    • 1993
  • The study of Cochlear biomechanics is to clearly define three biomechanical principles of the Cochlea : Activity, Nonlinearity and Feedback. In this article, the Cochlea is linearly and actively modelled in one dimensional time domain. The sharp tunning of the Basilar Membrane displacement is shown when the amplifying activity of hair cells is added to the model. The amplified energy of the travelling displacement wave is emitted throughout the Cochlear fluid, so that the model becomes unstable. A new technique is introduced to reduce strong echos fro the Helicotrema. It makes the model less unstable. Both pure and click tones are used as input stimuli onto the ear durm. When the model is normal, the click response of the model shows that the backward emission of the amplified fluid pressure has mainly the echos from the Helicotrema. However, when the linear and active model is assumed to be abnormal, that is, some of hair cells are damaged not to produce the active process, the effect of the hair cell damage is resulted in the Oto-acoustic emission. The frequency response of the abnormally emitted sound pressure shows that the Oto-acoustic emission has the information about the characteristic frequency of the damaged hair cell. The main aim of this paper is to demonstrate the active biomechanics of the Chchlea in the time domain.

  • PDF

기계적합금화법에 의한 연자성 복합분말의 제조 및 구조관찰 (Fabrication and Structural Observation of a Soft Magnetic Composite Powders by Mechanical Alloying)

  • 이충효
    • 한국재료학회지
    • /
    • 제29권4호
    • /
    • pp.252-257
    • /
    • 2019
  • Fabrication of soft magnetic composite powders for the $Fe_2O_3-Ca$ system by mechanical alloying(MA) has been investigated at room temperature. It is found that soft magnetic composite powders in which CaO is dispersed in ${\alpha}-Fe$ matrix are obtained by MA of $Fe_2O_3$ with Ca for 5 hours. Changes in magnetization and coercivity also reflect the details of the solidstate reduction process of hematite by pure metal of Ca during MA. The saturation magnetization of MA powders increases with increasing MA time and reaches a maximum value of 65 emu/g after 7 hours of MA. The average grain size of ${\alpha}-Fe$ in MA powders, estimated by diffraction line-width, gradually decreases with increasing MA time and reaches 52 nm after 5 hours of MA. It can also be seen that the coercivity of the 5-hour MA sample is fairly high at 190 Oe, suggesting that the grain refinement of already-produced ${\alpha}-Fe$ tends to clearly occur during MA.

CAPS (Cleaved Amplified Polymorphic Sequence) 마커를 적용한 김 교잡육종 기술 개발 (Cross-breeding of Neopyropia spp. (Bangiales, Rhodophyta) Using CAPS (Cleaved Amplified Polymorphic Sequence) Markers)

  • 박은정
    • 한국수산과학회지
    • /
    • 제56권1호
    • /
    • pp.124-132
    • /
    • 2023
  • This study aimed to cross between Korean and Japanese pure lines of Neopyropia strains to establish cross breeding technology and identify a superior variety that harbors the strength of both parents. Four crossing combinations were tried using three methods, resulting in 1,476 single conchocelis colonies. The three co-dominant Cleaved Amplified Polymorphic Sequence (CAPS) markers (EF-1α/Mse I, TOP2/Mse I, car A/ApaL I) were used to distinguish heterozygotic sporophytes and their maternal lines obtained from the inter and intraspecific cross-fertilization within the wild type of Neopyropia strains. Of the 1,476 colonies, 26.9% (218) were heterozygotes obtained from the nuclear CAPS markers. Their maternal line was clearly confirmed using organelle CAPS marker and chimeric thallus was obtained from crossing experiment of Japanese N. yezoensis (♀) and Korean N. yezoensis (♂). The use of CAPS markers improved the efficiency of crossbreeding by quickly screening heterozygotes and maternal lines in the conchocelis phase, which otherwise required pigmentation mutants as genetic markers.

Agronomical traits of Korean Mungbean Landrace

  • Yu-Na Kim;Soo-Kwon Park;Dool-Yi Kim;Mi-Suk Seo;Jung-Kyung Moon;Hyeon-Jung Kang
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.224-224
    • /
    • 2022
  • Mungbean(Vigna radiata (L.) R. Wilczek) is one of legume cultivated in south and east Asia. It well cultivated in high temperature and drought condition. In order to establish pure line for genomic studies, the agronomical characteristics of Korean mungbean landraces were evaluated. A total of 324 acessions derived from National Agrobiodiversity Center were selfed two times in 2021 nersery. Tree times of selfed from 324 accessions were characterized. The color of seed coat was divided into three groups: green, yellow and brown. Among them green color was the most common with 91.7%. Flower colors were divided into four groups: yellow, purplish yellow, greenish yellow and purplish green. Among them purplish yellow color had the highest with 77.8%. Out of 324 resources, only 4 showed compound leaves, and all resources had a heart-shaped leaf. The days to first flowering was 31 to 78 days. About 63% of the accessions bloomed 35 to 50 days after sowing. 324 Korean landraces are expected to be used as a population of the Korean mungbean core collection and serve as a basis for genomic breeding materials for mungbean.

  • PDF

DIAGNOSTICS OF PLASMA INDUCED IN Nd:YAG LASER WELDING OF ALUMINUM ALLOY

  • Kim, Jong-Do;Lee, Myeong-Hoon;Kim, Young-Sik;Seiji Katayama;Akira Matsunawa
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
    • /
    • pp.612-619
    • /
    • 2002
  • The dynamic behavior of Al-Mg alloys plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser irradiation. The keyhole fluctuated both in size and shape and its fluctuation period was about 440 ${\mu}{\textrm}{m}$. This instability has been estimated to be caused by the evaporation phenomena of metals with different boiling point and latent heats of vaporization. Therefore, the authors have conducted the spectroscopic diagnostics of plasma induced in the pulsed YAG laser welding of Al-Mg alloys in air and argon atmospheres. In the air environment, the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn, and singly ionized Mg line, as well as strong molecular spectrum of AlO, MgO and AIH. It was confirmed that the resonant lines of Al and Mg were strongly self-absorbed, in particular in the vicinity of pool surface. The self-absorption of atomic Mg line was more eminent in alloys containing higher Mg. These facts showed that the laser-induced plasma was relatively a low temperature and high density metallic vapor. The intensities of molecular spectra of AlO and MgO were different each other depending on the power density of laser beam. Under the low power density irradiation condition, the MgO band spectra were predominant in intensity, while the AlO spectra became much stronger in higher power density. In argon atmosphere the band spectra of MgO and AlO completely vanished, but AlH molecular spectra was detected clearly. The hydrogen source was presumably the hydrogen solved in the base Metal, absorbed water on the surface oxide layer or H$_2$ and $H_2O$ in the shielding gas. The temporal change in spectral line intensities was quite similar to the fluctuation of keyhole. The time average plasma temperature at 1 mm high above the surface of A5083 alloy was determined by the Boltzmann plot method of atomic Cr lines of different excitation energy. The obtained electron temperature was 3, 280$\pm$150 K which was about 500 K higher than the boiling point of pure aluminum. The electron number density was determined by measuring the relative intensities of the spectra1lines of atomic and singly ionized Magnesium, and the obtained value was 1.85 x 1019 1/㎥.

  • PDF

인삼(Panax ginseng C.A. Meyer) 신품종 고풍의 육성경과 및 생육특성 (Breeding Process and Characteristics of Gopoong, a New Variety of Panax ginseng C.A. Meyer.)

  • 권우생;이장호;박찬수;양덕춘
    • Journal of Ginseng Research
    • /
    • 제27권2호
    • /
    • pp.86-91
    • /
    • 2003
  • KT&G 중앙연구원 원료연구소에서 육성한 신품종 고풍에 대해서 육성경과, 생산력 검정 및 지역 적응시험을 수행하였다. 1968년에 선발하여 20년 이상 육성된 고풍은 줄기, 잎자루, 꽃대 및 잎맥부위까지도 진한 자색을 띤다. 열매송이 모양은 역삼각형이며 진한 붉은 색으로 재래혼계종인 자경종이나 기개발된 천풍 및 연풍과 지상부 표현형에서의 차이를 나타내었 다. 1981-1984년에 실시한 생산력 검정시험이나 1985-1990년에 실시한 지역적응력시험에서 대비구인 재래혼계종인 자경종과의 지상부 생육 제반 특성에서는 차이가 없었으나 유전적 특성의 발현 재현성이 있었다. 지하부 형질에서는 고풍의 생존율이 대비구인 자경종보다 2.6% 높았고, 고풍의 칸당 수량은 2.3 kg으로 자경종 2.2 kg보다 0.1 kg이 높았으며, 고급홍삼인 천지삼율은 고풍은 16.6%로 대비구인 자경종 9.4%보다 7.2%가 더 높았다. 따라서 고풍은 고급 홍삼제조용 원료삼 품종으로 가능성이 매우 높은 것으로 판단되었다.

GIS 기법을 이용한 최적입지 선정 연구 - 서울-동두천간의 최적방어지역 선정 - (A Study on the Selection of Optimum Location Using GIS Technique: The Case of Optimum Defense Area between Seoul and Dongducheon)

  • 김두일;이형호;한욱
    • 대한지리학회지
    • /
    • 제28권2호
    • /
    • pp.137-147
    • /
    • 1993
  • 본 연구의 목적은 GIS 기법을 이용하여 지형을 분석함으로써 서울-동두천 간의 추가령곡에서 최적 방어지역을 선정하는 것이다. 연구내용은 지형요소에 의한 보병부대의 최적방어지역 선정, 접근로를 중심으로 한 최적방어지역 선정, 그리고 양자간 차이점의 비교${\cdot}$분석이다. 연구과정은 최적 방어지역의 선정을 위한 고려요소의 검토, GIS를 이용하여 지역을 선정하는 과정 그리고 선정된 최적지역을 분석하는 과정의 세가지로 구성된다. 지형요소를 고려한 보병부대의 최적 방어지역은 도봉산, 수락한, 와방산, 국사봉 등과 같은 험준한 산악지역이며, 접근로를 고려한 최적 방어지역은 국사봉-축석령-불국산을 연결하는 동-서의 지역으로서 공간적 패턴이 특징적으로 나타난다.

  • PDF