• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.79-79
• /
• 2017

Grain Sorghum varieties grown in Korea have low productivity and are constrained by the fact that farmers' choice of improved varieties is limited. Hybrid cultivars have been demonstrated to be more productive and food security than pure line varieties. However, There's no available hybrid cultivars and never planted before in Korea. This study was, therefore, conducted to determine combining ability of Korean landrace varieties and cultivar, the level of heterosis of experimental hybrids depending on environments. Two cytoplasmic male-sterile lines were crossed with six male-fertile lines in accordance with North Carolina II mating scheme to generate 12 experimental hybrids. The hybrids were evaluated in replicated row-column alpha designs at two sites in Texas and South Korea under on-season production conditions. For each trait, general combining ability (GCA) and specific combining ability (SCA) effects were estimated using the line-tester method of analysis. Results indicated significant differences among genotypes for both grain yield potential and secondary traits. Hybrids were predominant for grain yield, and displayed up to 127% heterosis of A03017 ${\times}$ Sodamchal in Korea. Positive GCA for yield was observed for Donganme, Hwanggeumchal and Jungmo4002 in Korea. Among them Jungmo4002 and Donganme had highly positive for yield (227.90 and 84.90 kg ha-1), while it showed negative GCA for yield in College station (-40.90, -189.60 kg ha-1). ATx630 ${\times}$ Sodamchal had the greatest SCA for yield (468.10 kg/ha) in College station but at South Korea its SCA effect was -302.40 kg/ha. A similar trend was observed, followed by A03017 ${\times}$ Donganme (SCA effect = 215 kg ha-1 at College station vs. -44.20 kg ha-1 at South Korea). At South Korea the greatest positive SCA effect for grain was observed in ATx630 ${\times}$ Jungmo4002 as 322.20 kg/ha. Both GCA and SCA effects significantly interacted with site effects demonstrating the need for region adaptation of potential cultivars and test for developing Korea suitable cultivar.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.22-27
• /
• 2009

In this paper, an automatic functional inspection system EVT (Emulated Vision Tester) for LCD drive module PCB has been proposed and implemented. Typical automatic inspection system such as probing methods and vision-based systems are widely known and used, however, there exist undetectable defects due to critical timing factors which they may miss to catch from LCD equipments. Especially typical vision-based systems have inconsistency on acquisition of images so that distinction between gray scales can be difficult which results in low level of performance and reliability on the inspection results. The proposed EVT system is pure hardware solution. It directly compares pattern signals from a pattern generator to output signals from LCD drive module. It also inspects variety of analog signals such as voltage, resistance, wave forms and so forth. The EVT system not only shows high performance in terms of reliability and processing speed but reduces costs on inspection and maintenance. Also, full automation of entire production line can be realized when EVT is applied in in-line inspection processes.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.105-113
• /
• 1998

Accurate radiation dosimetric characters is very important to determine of dose to a radiotherapeutic patient. Medical linear accelerators have been developed not only its new quality of convenient operation but also electric moderation. It is reliable to measure more detail physical parameter that linac's internal ability. Typically, radiation dosimetric tool is classified ionization chamber, film, thermoluminescence dosimeter, etc. Nowaday, Electronic Portal Imaging Device is smeared in radiation field to verification of treatment region. EPID's image was focused that using both on-line image verification and absolutely minimum absorbed dose during radiotherapy. So, Electronic Portal Imaging was tested for quality evaluation of medical linear accelerator had its pure conditional flash. This study has performed symmetry, Light/Radiation field congruence, and energy check, geometry difference on wedge filter using a liquid filled ion chamber (EPID). Prior to irradiated on EPID, high energy photon beam is checked with ion chamber. Using these results more convenient dosimetric method is accomplished by EPID that taken digital image. Medical image is acquired with EPID too. Therefore, EPID can be analyzed by numerical information for what want to see or get more knowledge for natural human condition.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.22.2-22.2
• /
• 2009

Currently, metal silicides become increasingly more essential part as a contact material in complimentary metal-oxide-semiconductor (CMOS). Among various silicides, NiSi has several advantages such as low resistivity against narrow line width and low Si consumption. Generally, metal silicides are formed through physical vapor deposition (PVD) of metal film, followed by annealing. Nanoscale devices require formation of contact in the inside of deep contact holes, especially for memory device. However, PVD may suffer from poor conformality in deep contact holes. Therefore, Atomic layer deposition (ALD) can be a promising method since it can produce thin films with excellent conformality and atomic scale thickness controllability through the self-saturated surface reaction. In this study, Ni thin films were deposited by thermal ALD using bis(dimethylamino-2-methyl-2-butoxo)nickel [Ni(dmamb)2] as a precursor and NH3 gas as a reactant. The Ni ALD produced pure metallic Ni films with low resistivity of 25 $\mu{\Omega}cm$. In addition, it showed the excellent conformality in nanoscale contact holes as well as on Si nanowires. Meanwhile, the Ni ALD was applied to area-selective ALD using octadecyltrichlorosilane (OTS) self-assembled monolayer as a blocking layer. Due to the differences of the nucleation on OTS modified surfaces toward ALD reaction, ALD Ni films were selectively deposited on un-coated OTS region, producing 3 ${\mu}m$-width Ni line patterns without expensive patterning process.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.784-793
• /
• 2019

Two objectives can be pursued simultaneously with the ${\delta}$ control of a single-phase electric spring (ES). These objectives are the stabilization of the voltage across the critical load (CL) of a power system, and the achievement of a specific functionality similar to the pure compensation of reactive power or the correction of the power factor. However, existing control systems implementing the ${\delta}$ control do not cope with non-ideal operating conditions, such as line voltage distortions, and exhibit a somewhat sluggish regulation of the CL voltage. In an effort to improve both the steady-state and transient performances of an ES power system, this paper proposes implementing the ${\delta}$ control by means of a control system built up on the repetitive control and assisted by state feedback with pole assignment. This paper starts by analyzing the dynamics of an ES power system in terms of its poles and zeros. After that, a reduced second-order model of the dynamics is formulated to avoid a notch filter in the pole assignment. A repetitive control for an ES power system is then designed to meet the two above mentioned objectives. Experimental tests carried out on a laboratory setup demonstrate the effectiveness of the proposed control system in significantly improving the ES power system performance, while reaching the two objectives. In particular, the tests outline the large mitigation of harmonics in the CL voltage under line voltage distortions and its fast stabilization action.

• Journal of Audiology & Otology
• /
• v.25 no.4
• /
• pp.209-216
• /
• 2021

Background and Objectives: We aimed to analyze treatment outcomes following different initial management approaches and confirm treatment regimens for acute low-tone sensorineural hearing loss (ALHL) that would yield the best results. Subjects and Methods: We retrospectively analyzed the medical records of 106 patients with ALHL who visited a university hospital's otology clinic from March 2013 to June 2019. Pure-tone averages at the initial visit and at 2 and 4 weeks after the initial visit were evaluated. Results: Forty-nine patients were enrolled in this study; of them, 41 (83.7%) exhibited complete recovery (CR) at 2 weeks and 43 (87.8%) exhibited CR at 1 month after the initial visit. Regression analysis revealed that CR at 2 weeks after the initial visit was associated with diuretic use [Exp(B): 10.309, 95% confidence interval (CI): 1.007-100]. An initial daily low-dose steroid use was marginally significant [Exp(B): 1.042, 95% CI: 0.997-1.092; p=0.066]. Isolated diuretic use [Exp(B): 25.641, 95% CI: 1.121-90.909; p=0.039] was an independent, good prognostic factor at 1 month after the initial visit. However, other treatment regimens did not affect the final results. Conclusions: A combination of initial daily administration of ≤30 mg prednisolone plus diuretics was sufficient as the first-line treatment for ALHL. High-dose steroids and salvage intratympanic steroid injections can be applied as a second choice; however, the predicted outcome would not be good in that case.

• Korean Journal of Audiology
• /
• v.25 no.4
• /
• pp.209-216
• /
• 2021

Background and Objectives: We aimed to analyze treatment outcomes following different initial management approaches and confirm treatment regimens for acute low-tone sensorineural hearing loss (ALHL) that would yield the best results. Subjects and Methods: We retrospectively analyzed the medical records of 106 patients with ALHL who visited a university hospital's otology clinic from March 2013 to June 2019. Pure-tone averages at the initial visit and at 2 and 4 weeks after the initial visit were evaluated. Results: Forty-nine patients were enrolled in this study; of them, 41 (83.7%) exhibited complete recovery (CR) at 2 weeks and 43 (87.8%) exhibited CR at 1 month after the initial visit. Regression analysis revealed that CR at 2 weeks after the initial visit was associated with diuretic use [Exp(B): 10.309, 95% confidence interval (CI): 1.007-100]. An initial daily low-dose steroid use was marginally significant [Exp(B): 1.042, 95% CI: 0.997-1.092; p=0.066]. Isolated diuretic use [Exp(B): 25.641, 95% CI: 1.121-90.909; p=0.039] was an independent, good prognostic factor at 1 month after the initial visit. However, other treatment regimens did not affect the final results. Conclusions: A combination of initial daily administration of ≤30 mg prednisolone plus diuretics was sufficient as the first-line treatment for ALHL. High-dose steroids and salvage intratympanic steroid injections can be applied as a second choice; however, the predicted outcome would not be good in that case.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.880-897
• /
• 2022

The purpose of this study is to apply the traditional Chinese fretwork on the 'Faux Chenille' textile work method in a way of enhancing the decorative features of patterns and developing the fashion design. As for the method, it works on the historic background and advancement of the fretwork and it refers to the bibliographies pertinent to the traditional Chinese geometric pattern. The result are as follows. First, pure cotton and 100% rayon are mixed to make it feasible to produce the texture for the material to be tender and enhanced, and in the process of washing and drying the Faux Chenille textile. The Faux Chenille textile is an important material that is required to select materials with great absorption capability as the most effective material to re-visualize the lines and patterns by sustaining the diagonal lines. Second, the fretwork is designed to process the basic formation for 90° angle with the sense of unlimited extensive line and changes with straight line. It has been confirmed that, if the angle that controls the Faux Chenille textile and the tailoring interval are well aligned, the expression of traditional geometric pattern would be effective and it may be expressed in contemporary style. Third, through the fashion design application by utilizing the Faux Chenille textile of the fretwork, it is confirmed that the contemporary application of the traditional culture could be expressed uniquely and creatively while it is affirmed that the western technique and Asian culture can be blended in harmony.

• FOCUS: LIFE SCIENCE
• /
• no.1
• /
• pp.1.1-1.4
• /
• 2024

This article provides comprehensive guidance on the maintenance, cleaning, regeneration, and storage of silica-based HPLC (High-Performance Liquid Chromatography) columns. The general considerations emphasize the importance of using in-line filters and guard cartridges to protect columns from blockage and irreversible sample adsorption. While these measures help, contamination by strongly adsorbed sample components can still occur over time, leading to an increase in back pressure, loss of efficiency, and other issues. To maximize column lifetime, especially with UHPLC (Ultra-High Performance Liquid Chromatography) columns, it is advisable to use ultra-pure solvents, freshly prepared aqueous mobile phases, and to filter all samples, standards, and mobile phases. Additionally, an in-line filter system and sample clean-up on dirty samples are recommended. However, in cases of irreversible compound adsorption or column voiding, regeneration may not be possible. The document also provides specific recommendations for column cleaning procedures, including the flushing procedures for various types of columns such as reversed phase, unbonded silica, bonded normal phase, anion exchange, cation exchange, and size exclusion columns for proteins. The flushing procedures involve using specific solvents in a series to clean and regenerate the columns. It is emphasized that the flow rate during flushing should not exceed the specified limit for the particular column, and the last solvent used should be compatible with the mobile phase. Furthermore, the article outlines the storage conditions for silica based HPLC columns, highlighting the impact of storage conditions on the column's lifetime. It is recommended to flush all buffers, salts, and ion-pairing reagents from the column before storage. The storage solvent should ideally match the one used in the initial column test chromatogram provided by the manufacturer, and column end plugs should be fitted to prevent solvent evaporation and drying out of the packing bed.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.651-654
• /
• 2011

Cymbidium 'Orange Bowl' (Lucky Rainbow 'Randevous' ${\times}$ 'Eastern Star') was developed from a cross between hybrids at the National Institute of Horticultural & Herbal Science, Rural Development Administration in 2006. A cross was made between the pink colored flower C. Lucky Rainbow 'Randevous' as maternal line and pure yellow colored flower, C. 'Eastern Star' as paternal line in 1995. The seed germination, cultivation, selection, and characteristic trials were conducted from 1996 to 2006. The line was named as Wongyo F1-18 and phenotype was characterized in 2006 as a new 'Orange Bowl'. The 'Orange Bowl' has having light yellow basal color (RHS, YO21D) and orange line (RHS, OR30B) on both of sepal and petal with red lip (RHS, OR30B). 'Orange Bowl' has about 10.9 flowers per flower stalk and flower size of 7.4 cm. General appearance of the petals and sepals is slightly incurved shape. The plant size is intermediate having erect peduncle. Blooming is started from the late of January (mid winter) under optimal culture condition. Leaf attitude and twisting is half- erect and very weak respectively. This hybrid has attractive floral arrangement, long flower stalk (71.8 cm) and vigorous growth. We expect that 'Orange bowl' has a great potential for exporting to Chinese market.