• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.659-664
• /
• 2001

Noise barriers are widely used to reduce the sound level propagating from highways, railways or factories to residential areas. The reduced noise level at a receiver point is then determined by the diffracted waves around the edge of the barrier as well as by the transmitted waves through the barrier. For proper usage, many studies either theoretical or experimental have been made with the objective of precisely predicting the acoustic field and improving the noise attenuating properties of barriers. In this study, a simple scattering model, a line acoustic source scattered by an infinite cylinder, is introduced to simply investigate the sound attenuation efficiency of a sound-resonating barrier. From this model study, it is observed that the sound-resonating barrier can be used as a good sound-shielding element especially for the pure-tone noise generated from the transformer. Large sound-attenuation is achieved by applying the sound-resonating barrier to the large transformers in a substation.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.367-371
• /
• 2001

Lithium inserted into artificial carbon has been synthesized as a function of the Li concentration. The characteristics of these prepared compounds were determined from the studies using X-ray diffraction(XRD), solid nuclear magnetic resonance (NM R) spectrophotometric and differential scanning calorimeter(DSC) analysis. X-ray diffraction showed that lower stage intercalation compounds were formed with increasing Li concentration. In the case of the AG3, most compounds formed were of the stage 1 structure. Pure stage 1 structural defects of artificial graphite were not observed. 7Li-NMR data showed that bands are shifted toward higher frequencies with increasing lithium concentration; this is because non-occupied electron shells of Li increased in charge carrier density. Line widths of the Li inserted carbon compounds decreased slowly because of nonhomogeneous local magnetic order and the random electron spin direction for located Li between graphene layers. The enthalpy and entropy changes of the compounds can be obtained from the differential scanning calorimetric analysis results. From these results, it was found that exothermic and endothermic reactions of lithium inserted into artificial carbon are related to the thermal stability of lithium between artificial carbon graphene layers.

• The Pure and Applied Mathematics
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2023

In this paper, we find a bound for all the zeros of a polynomial in terms of its coefficients similar to the bound given by Montel (1932) and Kuneyida (1916) as an improvement of Cauchy's classical theorem. In fact, we use a generalized version of Hölder's inequality for obtaining various interesting bounds for all the zeros of a polynomial as function of their coefficients.

• Archives of Metallurgy and Materials
• /
• v.63 no.3
• /
• pp.1513-1516
• /
• 2018

We fabricated two different kinds of composite materials for absorbing microwave in a frequency range of 2 to 18 GHz using coaxial airline and thru-reflect-line (TRL) method. The composite materials having carbon nanotube (CNT) with carbonyl iron (CI) or iron oxide (Fe₃O₄) were fabricated by mixing each components. Magnetic properties were measured by SQUID equipment. Complex permittivity and complex permeability were also obtained by measuring S-parameters of the toroidal specimen dispersing CI/CNT and Fe₃O₄/CNT into the 50 weight percent (wt%) epoxy resin. The real permittivity was improved by mixing the CNT however, the real permeability was same as pure magnetic powders. The CI/CNT had a maximum value of real permittivity and real permeability, 11 and 1.4 at 10 GHz, respectively. The CNT composites can be adapted to the radar absorbing materials, band width 8-12 GHz.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.29-42
• /
• 1994

Discrimination studies between microearthquakes and underground explosions are carried out in the pure-continental path of north-south within the Korean Peninsula. The characteristic waveforms for explosions and microearthquakes are investigated in the light of observation and synthetic seismograms. The characteristic waveform generation is minnly a function of source mechanism and ray-path and former influences more strongly than the latter.A double-couple source mechanism for microeatthquakes and a single-couple(force) mechanism for explosions are presented in this study. It is found for very shallow events to have outstanding of $L_g$ waves in the transverse components that pass through the upper crust with period of 1 - 6 seconds and fundamental modes of Rayleigh waves, $R_g$ in the vertical component with period 8-12 seconds. Furthermore it is pointed out that the first arrival amplitudes of SH waves for explosions are always srnall regardless of azimuth of stations since there is non-existence of nodal lines for the explosion mechanism. Theoretical seismograms for explosions show the first motions of compression with short wavelengths as well as mostly fundamental modes of Rayleight waves, $R_g$ waves and $L_g$ waves, whereas those of micro-earthquakes give either compression or dilatation according to the ack azimuth epicenter to stations and poor or non $R_g$ waves and complicated $L_g$ waves, depending on the focal depth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1344-1367
• /
• 2014

Mobile traffic is increasing a masse because of the propagation of the Internet and the development of wireless mobile technology. Accordingly, the Network Local Mobility Management (NETLMM) working group [1] of the Internet Engineering Task Force (IETF) has standardized Proxy Mobile IPv6 (PMIPv6) [2] as a protocol for accomplishing the transmissibility of mobile terminals. PMIPv6 is a network-led IP-based mobility management protocol, which can control terminal mobility without depending on the type of access system or the capability of the terminal. By combining PMIPv6 and the mobility of Session Initiation Protocol (SIP), we can establish terminal mobility and session mobility through a more effective route. The mobility function can be improved and the overlap of function reduced as compared to that in the case of independent operation. PMIPv6 is appropriate for a non-real-time service using TCP, and SIP is appropriate for a real-time service using RTP/UDP. Thus, in the case of a terminal using both services, an effective mobility management is possible only by using PMIPv6 together with SIP. In order to manage mobility in this manner, researches on PMIPv6-SIP are in progress. In line with this trend, this paper suggests a new PMIPv6-SIP architecture where when a mobile terminal conducts a handover, a network-led handover while maintaining the session without the addition of a special function or middleware is possible along with effective performance evaluation through mathematical modeling by comparing the delay and the packet loss that occur during the handover to the Pure-SIP.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1179-1194
• /
• 1992

QUICKER scheme has several attractive properties. However, under highly convective conditions, it produces overshoots and possibly some oscillations on each side of steps in the dependent variable when the flow is convected at an angle oblique to the grid line. Fortunately, it is possible to modify the QUICKER scheme using non-linear and linear functional relationship. Details of the development of polynomial upwinding scheme are given in this paper, where it is seen that this non-linear scheme has also third order accuracy. This polynomial upwinding scheme is used as the basis for the SHARPER and SMARTER schemes. Another revised scheme was developed by partial modification of QUICKER scheme using CDS and UPWIND schemes(QUICKUP). These revised schemes are tested at the well known bench mark flows, Two-Dimensional Pure Convection Flows in Oblique-Step, Lid Driven Cavity Flows and Buoyancy Driven Cavity Flows. For pure convection oblique step flow test problem, QUICKUP, SMARTER and SHARPER schemes remain absolutely monotonic without overshoot and oscillation. QUICKUP scheme is more accurate than any other scheme in their relative accuracy. In high Reynolds number Lid Driven Cavity Flow, SMARTER and SHARPER schemes retain lower computational cost than QUICKER and QUICKUP schemes, but computed velocity values in the revised schemes produced less predicted values than QUICKER scheme which is strongly effected by overshoot and undershoot values. Also, in Buoyancy Driven Cavity Flow, SMARTER, SHARPER and QUICKUP schemes give acceptable results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.65-73
• /
• 2007

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.1-5
• /
• 2022

We investigate the effect of surface disorder on the lower critical field (H_c1) of MgB₂ thin films with a thickness of 850 nm, where the disorder on the surface region is produced by the irradiation of 140 keV Co ions with the dose of 1 × 10¹⁴ ions/cm². The thickness of the damaged region by the irradiation is around 143 nm, corresponding to ~17% of the whole thickness of the film, thereby forming the disordered MgB₂ overlayer on the pure MgB₂ layer. The magnetic field dependence of magnetization, M(H), for the pristine MgB₂ thin film and the film with overlayer is measured at various temperatures, and H_c1 is determined from the difference (△M) between the Meissner line and magnetization signal with the criterion of △M = 10^-3 emu. Intriguingly, the film with the disordered overlayer shows a remarkably large H_c1(0) = 108 Oe compared to the H_c1(0) = 84 Oe of pristine film, indicating that the disordered MgB₂ overlayer on the pure MgB₂ layer serves to prevent the penetration of vortices into the sample. These results provide new ideas for improving the superheating field to design high-performance superconducting radio-frequency cavities.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.127-134
• /
• 1999

This study was performed to obtain the basic data to present rational silvicultural tending plan. It makes these widely distributed pine-oak mixed stand and each of pure stand in middle province on object of this study and do comparative analysis of light condition about stand parameter and natural regeneration according to each slope(north, west and south) conditions of location in central part of South Korea. Sample plots for pine-oak mixed stand and pine and oak pure stand were established on each of southern, northern and western slopes based upon site and growth conditions of the slope. Sample plot was a circle of 0.05ha with a diameter of 25.24 m. A sample plot has between 30 and 40 tree in it. Total 23 sample plots were established; 9 pure pine stands, 8 pine-oak mixed stands. and 6 pure oak stands across lower, middle, upper parts of slopes. Relative light intensity within a stand was' measured by crown- photo(fish-eye lens; 180$^{\circ}$) system through fish-eye lens and by comparing each plot with the denuded through PAR-sensor. The crown closure ratio of pure pine stand (75%) shows much lower than that of mixed stand (90.9%) and pure oak stand (93%). The relative light intensity within a stand showed an opposite result. The crown closure of mixed stands tended to become gradually low as the slope moves from the north to the south, but the relative light Intensity within the stand tended to rise. By analyzing the relationship between the relative light intensity within a stand and stand parameter, light intensity within a stand tended to decrease as the diameter and N/ha increase. Number of oak seedlings and light intensity within a stand is in a straight-line regression relation. In particular, the number of oak seedlings was the highest in mixed stands on the southern slope. But no single pine seedling was found. The unfavorable conditions of l0cm thick litter layer and low relative light intensity in a stand (ranging between 4% and 8%) is considered to prevent pine seeds from germinating.