• 에너지공학
• /
• 제19권2호
• /
• pp.92-102
• /
• 2010

플러그인 하이브리드 전기자동차(Plug-in Hybrid Electric Vehicle, PHEV)는 하이브리드 전기자동차(Hybrid Electric Vehicle, HEV)의 일종으로, 배터리 용량을 HEV보다 더욱 증대시키고 배터리의 충전을 전력망으로부터 할 수 있도록 한 자동차이며, 순수 배터리 전기자동차(Plug-in Battery Electric Vehicle, PBEV)는 전력망으로부터 전기를 배터리에 충전하여 저장하고 배터리에 저장된 전기만을 이용하여 운전가능한 자동차이다. 최근에 PHEV와 PBEV에 대한 관심과 개발이 전세계적으로 급속하게 증가하고 있다. 그러므로 이들 전력망 충전식 전기자동차가 전력망의 전력수요에 미치는 영향을 검토하는 것이 중요하다. 본 논문에서는 이들 PHEV와 PBEV 자동차의 보급으로 전력망의 전력수요, 이산화탄소 배출량과 차량구매자의 관점에서 운전비용에 미치는 영향을 분석하였다. 2020년경에 차량보급이 10%정도로 이루어질 것을 가정하여 영향을 분석하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.882-883
• /
• 2013

With the development of the society, pure electric vehicles will be surely important of the future. Electric vehicle requires various technology like motor driving, battery management, operational efficiencies and so on. Battery management is indeed the most important to enhance battery's performance and life. This paper has deeply discussed and studied on the lithium-polymer battery management system of pure electric vehicle. First of all we have analyzed the characteristic of the lithium-polymer batteries and the factors influenced on the state of charge. Then a logical SOC measuring method has been raised, which is the combination of open circuit voltage and Ah integration. The next we will introduce the design of battery management system, the battery management system performs many functions, such as inspecting the whole process, when it's running cell equalization protecting and diagnosing the battery, estimating the state of charge. The module design style including microcontroller, data aquisition module, charging control module and serial communication module. To arrive at conclusions, the battery management system which this paper has introduced is reliable and economical.

• 전자공학회논문지SC
• /
• 제48권6호
• /
• pp.71-81
• /
• 2011

일반적인 내연기관 자동차와는 달리, 전기자동차는 파워트레인을 구성하는 배터리, 인버터, 모터 등의 전기 동력 시스템들이 차량의 주행성능과 동역학 특성에 직접적인 영향을 준다. 따라서 전기 차량의 최종 운동 및 동특성을 예측하기 위해서, 기계 및 전기전자 복합 시스템을 세부적으로 모델링하고 이를 통한 전체 파워트레인의 해석이 필요하다. 본 논문에서는 전기자동차의 최종 출력 성능을 예측하고 분석하기 위한 전기자동차의 파워트레인 시스템의 동적 모델을 유도하였다. 전기적인 신호로부터 최종 기계 동력 시스템으로 전달되는 입출력 변수의 상관관계를 수학적으로 모델링하여 개발하였다. 또한, 전기자동차의 동특성을 시뮬레이션 할 수 있는 기준모델을 Matlab/Simulink 플랫폼 기반으로 개발하였으며, 이를 이용하여 유도된 수학적 분석 모델을 검증하였다. 이를 통하여 속도, 가속도, 추진력 등의 주요 차량 주행성능을 비교 분석하였다.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.23-26
• /
• 2015

The purpose of present study is to analysis the Characteristics of fuel economy and Green house gases due to the driving mode conditions of The hybrid electric vehicle(HEV). HEVs are divided into mild and power types according to the their functions. mild type HEVs are inexpensive because they do not need to implement a pure electric mode. Power type HEVs are more expensive but has also better fuel efficiency. In the present paper, the test results for the gasoline vehicle using FTP-75 mode and HWFET are present.

• 한국산업융합학회 논문집
• /
• 제25권4_1호
• /
• pp.493-504
• /
• 2022

Recently, as interest in eco-friendliness grows, the supply of hybrid electric vehicles and pure electric vehicles (EVs) for improving fuel efficiency of automobiles is rapidly expanding. The average daily energy consumption of electric vehicles is less than 20 [%] of the total ESS capacity of the vehicle, and research on additional functions using the ESS of the vehicle is urgently needed to expand the supply of electric vehicles. V2H(Vehicle to Home), like V2G(Vehicle to Grid), includes the concept of cooperating with system stabilization using ESS of electric vehicles. In addition, it includes various operations that can realize home welfare, such as uninterrupted power supply in case of power outage at home, and power supply for home DC devices. Therefore, in order to expand the supply of eco-friendly electric vehicles, it is urgently required to develop a V2H system with various functions that can realize home welfare. In this paper, we propose a V2H system with a CLLC resonant converter and a non-isolated step-up converter that can solve different impedance and resonant frequencies depending on the power transfer direction. The proposed V2H system is 6 [kVA] applicable to 150-450 [V], the voltage range that can use the ESS voltage for electric vehicles, and is designed with a capacity that can handle instantaneous electricity use at home. In addition, in order to verify the feasibility, an experiment by Psim simulation and prototype production was performed.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.138-144
• /
• 2012

Recent environmental issues such as exhaust gas and greenhouse effect make the agricultural machinery market takes into account the hybrid and electric propulsion technology used in automotive engineering. Generally the agricultural machinery, particularly an agricultural tractor, needs large load capacity and long continuous operating time comparing with conventional vehicles. In case of a pure electric tractor, it is necessary for considering large capacity batteries and long charging time. Therefore we take an AER extended PHEV (All Electric Range extended Plug-in Hybrid Electric Vehicle) power transmission system in developing an electric tractor in this study. First we propose a PHEV powertrain structure in order to substitute the conventional diesel engine equipped tractor. And we performed the road tests using a conventional mechanical tractor with various load conditions, which were classified and statistically treated real agricultural works. The test results were analysed with respect to the power characteristics of the power source. Finally using the test result, we designed two-stepped reduction gear ratios in the proposed an electric tractor powertrain for carrying out typical agricultural works.

• Journal of Power Electronics
• /
• 제3권4호
• /
• pp.230-238
• /
• 2003

Electric vehicles (EV) demands for greater acceleration, performance and vehicle range in pure electric vehicles plus mandated requirements to further reduce emissions in hybrid electric vehicles (HEV) increase the appeal for combined on-board energy storage systems and generators. And the power electronics plays an important role in providing an interface between fuel cells (FC) and loads. This paper deals with a multiple input DC-DC power converter devoted to combine the power flowing of multi-source on energy systems. The multi-source is composed of (i) FC system as a prime power demands, (ii) super capacitor banks as energy storage devices for high and intense power demands, (iii) superconducting magnetic energy storage system (SMES), (iv) multiple input DC-DC power converter and (v) a three phase inverter-fed permanent magnet synchronous motor as a drive. In this system, It is used super capacitor banks and superconducting magnetic energy replaces from the battery system. The modeling and transient performance simulation is effective for reducing transient influence caused by sudden charge of effective load. The main purpose of power electronic converters is to convert the DC power output from the fuel cell and other to a suitable AC voltage, which can be connected to electric loads directly (PMSM). The fuel cell and other output is connected to the DC-DC converter, which regulates the DC link voltage.

• 에너지공학
• /
• 제25권4호
• /
• pp.170-175
• /
• 2016

현재 자동차의 주요 동력원은 내연기관이 가장 많은 비중을 차지하고 있다. 내연기관 자동차로 인한 환경문제를 해결하기 위한 친환경 자동차로는 하이브리드 자동차, 전기 자동차 및 공기 엔진 자동차 등을 들 수 있다. 배터리를 이용하는 하이브리드 차나 순수 전기차 등도 아직은 크지 않으나 점차 많은 비중을 차지하여 나가고 있다. 전기모터를 사용하는 전기차에 비해 압축공기를 이용하는 공기 엔진 자동차는 아직은 연구개발이 거의 이루어지지 않은 상태이다. 본 논문에서는 스크롤 팽창기를 적용하는 새로운 압축공기 엔진을 소개하고, 이 엔진을 장착한 자동차의 주행거리 가능 거리를 이론적으로 산출하였다.

• 전기화학회지
• /
• 제4권2호
• /
• pp.53-57
• /
• 2001

전기자동차 운용시 빈번히 발생되는 차량의 주정차기간에 축전지는 자기방전을 일으켜 용량의 손실이 발생하게 된다. 따라서 전기자동차의 잔존용량을 정확히 측정하기 위해서는 자기방전에 의한 용량손실을 고려하여야 한다. 이 논문에서는 전기자동차 운용시 빈번히 발생할 것으로 예상되는 주정차기간에 대해 포괄적으로 적용할 수 있는 Ni/MH Battery의 자기방전율을 나타내는 일반식을 전산모사 방법 중 하나인 실험계획법을 이용하여 구하였으며 이를 시험데이터와 비교하였다. 실험계획법을 위한 온도영역으로는 전기자동차가 운용되는 $-20\~30^{\circ}C$의 온도구간을 선정하였으며, 축전지의 방치시간으로는 자기방전이 상대적으로 크게 일어나며 빈번히 발생할 것으로 예상되는 영역인 1일$\~$15일 범위를 선택하였다. 이와 같은 방법으로 실험계획법에 의해 구해진 축전지 자기방전율에 대한 일반식의 타당성을 검증하기 위해 축전지에 대한 자기방전시험을 수행하여 비교하였으며, 그 결과 실험계획법으로 예측한 축전지의 자기방전율은 시험데이터와 우수한 일치를 나타내었다.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.152-160
• /
• 2011

The electromagnetic characteristics of FCEVs (fuel cell electric vehicles) are much different from the existing combustion engine cars as well as hybrid, plug-in-hybrid, and pure electric vehicles due to the high voltage/current generated by a fuel cell stack which uses a compressed hydrogen gas reacted with oxygen. To operate fuel cell stack efficiently, BOP (Balance of Plant) which is consisted of many motors in water pump, air blower, and hydrogen recycling pump as well as inverters for these motors is essential. Furthermore, there are also electric systems for entertainment, information, and vehicle control such as navigation, broadcasting, vehicle dynamic control systems, and so on. Since these systems are connected by high voltage or general cables, EMC (Electromagnetic compatibility) analysis for high voltage and general cable of FCEV is the most important element to prevent the possible electric functional safety errors. In this paper, electromagnetic fields by high voltage and general cables for FCEVs is studied. From numerical analysis results, total time harmonic electromagnetic field strength from high voltage and general cables have difference of 13~16 dB due to ground effect by impedance matching. The EMI results of FECV at 10 m distance shows difference of 41 dB at 30 MHz and 54 dB at 230 MHz compared with only general cable routing.