• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.843-850
• /
• 2020

The purpose of this study is to evaluate the structural risk and weakness of a railway tank car through nonlinear collision analysis according to overseas collision safety standards. The goal is to propose a crash safety design guideline for railway tank cars for transporting dangerous goods in Korea. We analyzed the buffer impact test procedure of railway freight cars prescribed in EN 12663-2 and the tank puncture test criteria prescribed in 49CFR179. A nonlinear finite element model according to each standard was modeled using LS-DYNA, a commercial finite element analysis solver. As a result of the buffing impact test simulation, it was predicted that plastic deformation would not occur at a collision speed of 6 km/h or less. However, plastic deformation was detected at the rear of the center sill and at the tank center supporting the structure at a collision speed of 8 km/h or more. As a result of a head-on test simulation of tank puncture, the outer tank shell was destroyed at the corner of the tank head when 4% of the kinetic energy of the impacter was absorbed. The tank shell was destroyed in the area of contact with the impacter in the test mode analysis of tank shell puncture when the kinetic energy of the moving vehicle was reduced by 30%. Therefore, the simulation results of the puncture test show that fracture at the tank shell and leakage of the internal material is expected. Consequently, protection and structural design reinforcement are required on railway tank cars in Korea.

• Pediatric Infection and Vaccine
• /
• v.6 no.1
• /
• pp.101-106
• /
• 1999

Purpose : Tuberculosis, a major public health problem, is an important cause of childhood infectious diseases. To decrease the tuberculosis morbidity rate, BCG vaccination and chemoprophylaxis are performed. Recently 2TU PPD skin test was introduced as a diagnostic method for tuberculous infection. We studied the positive conversion rate of 2TU PPD test after percutaneous multiple puncture BCG vaccination. Methods : Four hundred seventy six infants from well baby clinic of Samsung Cheil Hospital were enrolled. They were immunized with percutaneous multiple puncture technique BCG(Japan BCG laboratory, Japan) at 1 month of age. Approximately 6 months later, tuberculin skin test using RT23 2TU PPD was performed. Induration size, family history of tuberculosis and number of BCG scars were evaluated. Induration greater than or equal to 5mm was defined as positive conversion. Results : Among 476 infants, 248(52.1%) were male and 228(47.9%) were female. PPD skin tests were performed $6.2{\pm}0.5$($mean{\pm}S.D.$) months after BCG vaccination. Mean induration size was $7.3{\pm}3.2mm$ and positive conversion rate was 85.5%. Total number of BCG scars was $15.5{\pm}3.2$. Conclusion : The seroconversion rate by 2TU PPD test after percutaneous multiple puncture BCG vaccination was high. But, more comparative studies with various age groups may be needed for 2TU PPD test used as diagnostic method of tuberculosis in the hospitals.

• Neonatal Medicine
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2010

Purpose: To evaluate two different heel lancet device in terms of pain response and success of the procedure in the preterm infants undergoing heel puncture. Methods: 100 preterm infants undergoing capillary blood gas analysis or capillary bilirubin monitoring underwent heel puncture, were randomly allocated to blood sampling from the heel with either a conventional manual lancet or an automatic incision device. Primary outcome measures included the Premature Infants Pain Profile (PIPP) score, total duration of procedure, number of heel puncture and number of bruise. The pain response was evaluated using PIPP score and the effectiveness was evaluated using three criteria: total duration of blood sampling, number of puncture, bruising of the heel or ankle. Statistical analysis was performed using the SPSS ver. 13.0 program. Difference between the groups were analysed with t test (continuous variables) and the Chi square test or Fisher test (categorical variables). Results: The mean PIPP score was 4.91 for the automatic lancet group compared with 5.84 for the conventional manual lancet group (P=0.0255).The number of pain scores above 7 during blood collection did not differ between two groups (P=0.2167). The procedure took less time to perform in the automatic lancet group (mean, 30.69 seconds) than in the conventional lancet group (mean, 48.92 seconds) (P<0.0001). Conclusion: This study demonstrated that the automatic lancet device causes less pain and a shorter procedure time than the conventional manual lancet in preterm infants undergoing heel puncture. On the basis of these results the automatic lancet device is very useful method for blood collection in preterm infants by heel puncture.

• Proceedings of the KSLP Conference
• /
• 2016.03a
• /
• pp.50-50
• /
• 2016

• Annals of Clinical Neurophysiology
• /
• v.17 no.1
• /
• pp.41-43
• /
• 2015

• Journal of Trauma and Injury
• /
• v.19 no.1
• /
• pp.93-96
• /
• 2006

A traumatic spinal subdural hematoma is a rare condition, and only nine cases have been reported until now. We report a rare case of concomitant intracranial hemorrhage and spinal subdural hematoma with a review of the literature. A 45-year-old man was referred to our institute after being stroke by a car. He complained of nausea, headache, back pain, and bilateral sciatica. Brain computed tomography and lumbar spine magnetic resonance images revealed both an intracerbral hemorrhage and a subdural hematoma in the L4 to S1 level. After performing a lumbar spinal puncture and draining the hemorrhagic cerebrospinal fluid (CSF), the intracranial and spinal hematomas were resolved completely without any neruologic deficits.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.64-68
• /
• 2003

The purpose of the study is to compare the efficiency of protection as a liner protective material for geosynthetics. A series of tests were conducted in this study to analyze the effects of geosynthetics against puncture loads. Various types of geosynthetics are used as a protective material. Non-woven, Geo-composite, NaBento GCL, GCL are used to create puncture failure that caused by vertically applied loads. The results indicated that combination of geosynthetics and a protective material can be subjected to bigger loads than geosynthetics and a protective material separated each other do.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.411-413
• /
• 1995

Porcelain insulators have been used for the almost all of the suspension insulators in distribution line. However, Puncture breakdowns in porcelain insulators caused by westing cement between metal fitting and porcelain material. There is little puncture breakdown in Epoxy casting insulator. This paper presents a new design technique for the development of suspension insulator used Cycloaliphatic Epoxy resin. The design was performed on the basis of two conditions (weather conditions for the past 30 years and the existing installation conditions of KEPCO) and was proven of its adaptability by FEM method.

• The Korean Journal of Pain
• /
• v.1 no.2
• /
• pp.177-180
• /
• 1988

Transsacral neurolytic block with 2.5ml of phenol in glycerine or bupivacaine was performed in 6 patients with malignant diseases and a patient with sphincter spasm of bladder due to spinal cord injury. Pain relief was satisfactory in all patints except one patient with very low pain threshold. In one patient, second transsacral neurolytic block alone was not sufficient because of widespread pain along distant metastasis of the malignant disease, although the first block was satisfactory. The complications include transient motor weakness(4), voiding difficulty(1), subarachnoid puncture(1), and epidural venous puncture(1), but they were all spontaneously recovered within a sbort period of time and did not give any limitation to the block.

• Journal of the Korean Home Economics Association
• /
• v.26 no.3
• /
• pp.93-102
• /
• 1988

Rheological properties of cowpea and mung bean starch gels and pastes were investigated and compared with Instron Universal Testing machine and Brabender Viscometer. As the result of puncture test of gels, yield point force of mung bean starch gel was higher than that of cowpea starch gel. Compression coefficient of cowpea starch gel calculated by Bourne's equation was lower than that of mung bean starch gel. the stress relaxation test showed that viscoelastic properties of cowpea and mung bean starch gels may be represented by six element Maxwell model consisting of three Maxwell element in parallel. Cowpea and mung bean starch pastes showed bingham pseudoplastic behavior in 3, 5, 6, 7 and 8%. The consistency index in 7∼8% of cowpea starch paste were lower than those of mung bean starch paste. concentration dependence on consistency index and yield stress in mung bean starch were higher than those of cowpea starch. The yield stress of starch pastes was significantly correlated with yield point force by puncture test (r=0.996).