• 플랜트 저널
• /
• 제18권3호
• /
• pp.28-40
• /
• 2022

신재생에너지 발전 비중 확대가 예상됨에 따라 공공 발전사업자들은 바이오매스 혼소의 확대 시행을 적극적으로 검토해야 할 필요가 있다. 본 연구에서는 500MW 석탄화력에서 바이오매스 혼소율을 0wt.%에서 5.0wt.%까지 변화하며 미분기 주요 운전 특성을 측정하였다. 먼저, 목질계 바이오매스에 대한 구성성분 분석과 분쇄 특성을 알아보았고, 혼합연료의 부피 증가가 미분기 보울 압력 차이, 모터 전류, 이물질 처리횟수, 출구 온도, 내부 화재횟수에 미치는 영향을 분석하였다. 혼소율 증가에 따라 미분기 보울 압력 차이와 모터 전류, 이물질 처리횟수는 상승함을 확인하였고, 출구 온도는 상승 폭이 미미하였다. 내부 화재횟수는 명확한 상관관계를 찾기 힘드나, 다른 운전인자와 결합하여 발생할 가능성이 크다는 것을 확인하였다.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.245-251
• /
• 2015

The main objective of this study is to recovery valuable metals with metal particle size distributions in waste cell phone PCBs(Printed Circuit Boards) by means of pulverization and nitric acid process. The particle size classifier also was evaluated by specific metal contents. The PCBs were pulverized by a fine pulverizer. The particle sizes were classified by 5 different sizes which were PcS1(0.2 mm below), PcS2(0.20~0.51 mm), PcS3(0.51~1.09 mm), PcS4(1.09~2.00 mm) and PcS5(2.00 mm above). Non-magnetic metals in the grinding particles were separated by a hand magnetic. And then, Cu, Co and Ni were separated by 3M nitric acid. Particle diameter of PCBs were 0.388~0.402 mm after the fine pulverizer. The sorting coefficient were 0.403~0.481. The highest metal content in PcS1. And the bigger particle diameter, the lower the valuable metals exist. The recovery rate of the valuable metals increases in smaller particle diameter with same leaching conditions. For further work, it could improve to recovery of the valuable metals effectively by means of individual treatment, multistage leaching and different leaching solvents.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.99-105
• /
• 2003

지방을 함유하고 있는 붉은자루 동충하초는 일반적으로 분쇄에 널리 사용되고 있는 핀밀이나 해머밀로 분쇄하기에는 어려움이 있다 핀밀이나 해머밀은 분쇄 로터날과 분쇄망사이의 갭사이에서 로터의 회전에 의하여 발생하는 원심력을 이용 충격과 마찰로 분쇄물을 분쇄망의 홀크기에 의존하여 분쇄를 하게된다. 이때 지방이 많은 분쇄물의 경우 로터와 망의 마찰로 인한 열방생으로 인하여 지방이 녹아 분쇄망의 홀을 매우는 눈막힘 현상이 발생하게 되어 분쇄를 더이상 할 수 없게 된다. (중략)

• 한국분말재료학회지
• /
• 제7권2호
• /
• pp.85-92
• /
• 2000

The Cu55Ti45 system was effectively mechanically-alloyed using a pulverizer. Noncrystallinities of the powders were characterized by TEM, X-ray and DSC. The amorphous powders were consolidated without losing their noncrystallinities. The consolidating conditions keeping a non-crystalline were obtained by building a TTT diagram of the amorphous powders. The microhardness of the crystallite and bulk amorphous alloys are also compared.

• 청정기술
• /
• 제15권3호
• /
• pp.180-185
• /
• 2009

자동차용 웨더스트립 제조공정 중 발생하는 에틸렌-프로필렌 고무 스크랩을 고온전단분쇄기를 이용하여 표면활성화 된 분말을 얻은 후 이를 폴리프로필렌과 블렌드하여 열가소성탄성체를 제조하기 위한 기초연구를 수행하였다. 에틸렌-프로필렌 고무 스크랩 분쇄 시 표면활성제를 1.5 phr 첨가하면 최적의 표면활성화 된 분말을 얻을 수 있었다. 폴리프로필렌의 경우는 maleic anhydride를 반응블렌드에 의해 그라프트시켜 기능화 하였다. 기능화된 에틸렌-프로펄렌 분말과 폴리프로필렌을 블렌드하여 열가소성탄성체를 제조할 때 계면젖음 특성이 중요하기 때문에 계면젖음성을 향상시키기 위하여 상용화제로 poly(ethylene-co-acrylic arid)를 폴리프로필렌에 첨가하였다. Poly(ethylene-co-acrylic acid)는 폴리프로필렌의 표면장력을 감소시켰으며 이로 인해 에틸렌-프로필렌 분말과의 계면젖음성이 크게 증진될 것으로 기대된다.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.700-707
• /
• 2009

The coal mill used in the coal-fired power plants is modeled in view of the controller design rather than the educational simulator. The coal mass flow and the outlet temperature are modeled by reinvestigating the mass balance and heat balance models physically. The archived data from a plant database are utilized to identify the model parameters. It can be seen that the simulated model outputs are well matched with the measured ones. It is also expected that the proposed model is useful for the controller design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1692_1693
• /
• 2009

In this paper, the outlet temperature of the coal mill is modeled by reinvestigating the heat balance models physically. The archived data from a plant database are utilized for identifying the model parameters. It can be seen that the simulated model outputs are well matched with the measured ones. It is also expected that the proposed model is useful for the controller design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.283-285
• /
• 2002

Boiler combustion systems are large, non-linear systems with numerous interactions between its component parts. In the analysis of such complex systems. dynamic simulation is recognized as a powerful method of keeping track of the myriad of interactions. This paper shows and discusses the developed analysis model, such as the forced draft fan the primary air fan, the furnace and burner system, pulverizer, air preheater and induced draft fan, etc. in accordance with BMCR condition of boiler using the Modular Modeling System(MMS) software.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1589-1593
• /
• 2008

The condition of a high voltage motor was monitored with the motor performance monitor (MPM) at the motor control center. The MPM detected defects in the rotor bar and end ring and input power according to motor and load conditions. The assessment of the condition of a coal pulverizer motor indicated it was clearly in good condition in terms of the rotor bars, over voltage, and motor performance. However, the side bands at frequency, 56.48 Hz indicated existence of rotor end-ring fault. The large torque ripple indicated abnormal operating conditions. After visual inspection, it has been observed that an impeller blade of the circulating water pump was broken off causing the irregular torque pattern.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.225-228
• /
• 2001

Partial discharge(PD) testing for different capacitive couplers was performed on a 6.6kV, 448kW pulverizer motor. The motor has been in service for twenty years. PD tests were measured using digital partial discharge detector(DPDD) and partial discharge analyzer(PDA), respectively. PDA is used to in the motor stator insulation, which three 80pF or three 500pF epoxy-mica couplers were installed, one per phase. The 500pF couplers did detect more normalized quantity number(NQN) than the 80pF couplers. DPDD and PDA showed that PD and NQN magnitudes increased with increase of ac voltage. Internal discharge was discovered in the motor stator insulation. DPDD and PDA test results are in accordance with the pattern and magnitude of PD.