• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.818-824
• /
• 2008

The Separated Pulsed Laser Deposition (SPLD) technique uses two chambers that are separated by a conic metallic wall with a central orifice. The pressures of ablation chamber and deposition chamber were controlled by the differential vacuum system. We deposited zinc oxide (ZnO) thin films by SPLD method to obtain high quality thin films. When the bias voltage of +500 V was applied between a substrate and an orifice, the ZnO thin film was deposited efficiently. The deposited ZnO thin film at ablation chamber gas pressure of Ar 5 mTorr showed the sharpest ultraviolet absorption edge indicatory the band gap of about 3.1 eV. ZnO thin films were deposited using effect of electric and magnetic fields in the SPLD method. E${\times}$B drift happened by an electric fields and a magnetic fields, activated plasma plume, as a result the film surface became very smooth. When the bias voltage of +500 V and magnet of 0,1 T were applied the ZnO thin films surface state showed high quality. Grain size was 41.99 nm and RMS was 0.84 nm.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.830-835
• /
• 1998

The characteristics of the ablation plume generated by 532 nm Nd: YAG laser irradiation of a Pb(Zr0.52Ti0.48)O3 (PZT) target have been investigated using a pulsed-field time-of-flight mass spectrometer (TOFMS). The relative abundance of O+, Ti+, Zr+, Pb+, TiO+, and ZrO+ ions has been measured and discussed. TiO+ and ZrO+ ions were also found to be particularly stable within the laser ablation plasma with respect to PbO+ species. The behavior of the temporal distributions of each ionic species was studied as a function of the delay time between the laser shot and the ion extraction pulse. The most probable velocity of each ablated ion is estimated to be Vmp=1.1-1.6x 105 cm/s at a laser fluence of 1.2 J/cm2, which is typically employed for the thin film deposition of PZT. The TOF distribution of Ti+ and Zr+ ions shows a trimodal distribution with one fast and two slow velocity components. The fast velocity component (6.8x 10' cm/s) appears to consist of directly ablated species via nonthermal process. The second component, originated from the thermal evaporation process, has a characteristic velocity of 1.4-1.6 x 105 cm/s. The slowest component (1.2 x 105 cm/s) is composed of a dissociation product formed from the corresponding oxide ion.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.279-282
• /
• 2013

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.24-30
• /
• 2011

PC-TEMs (Polycarbonate Track-Etched membranes) were micro-drilled for biomedical applications by ultrafast pulsed laser. The ablation and damage characteristics were studied on PE-TEMs by assuming porous thin membranes. The experiments were conducted in the range of 2.02 $J/cm^2$ and 8.07$J/cm^2$. The ablation threshold and damage threshold were found to be 2.56$J/cm^2$ and 1.14$J/cm^2$, respectively. While a conical shaped drilled holes was made in lower fluence region, straight shaped holes were drilled in higher fluence region. Nanoholes made the membrane as porous material and ablation characteristics for both bulk and thin film membranes were compared.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.96-100
• /
• 2006

A pulsed laser ablation deposition (PLAD) technique is an excellent method for the fabrication of amorphous carbon (a-C) films. This paper was focused on the understanding and analysis of the motion of carbon atom (C) and carbon ion ($C^+$) particles in laser ablation assisted by Ar plasmas. The simulation has carried out under the pressure P=10~100 mTorr of Ar plasmas. Two-dimensional hybrid model consisting of fluid and Monte-Carlo models was developed and three kinds of the ablated particles which are C, $C^+$ and electron were considered in the calculation of particle method. The motions of energetic $C^+$ and C deposited upon the substrate were investigated and compared.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.271-277
• /
• 2004

As one of the concepts of the laser/electric hybrid propulsion system, a feasibility study on possibilities of electrostatic acceleration of a laser ablation plasma induced from a solid target was conducted. Energy distributions of accelerated ions were measured by a Faraday cup. A time-of-flight measurement was also conducted for ion velocity measurement. It was found that an average speed of ions from a pure laser ablation in this case was about 20 km/sec for pulse energy of 40 $\mu$J/pulse with pulse width of 250 psec. On the other hand, through an electrostatic field with a + I ,000 V electrode, the speed could be accelerated up to 40 km/sec. It was shown that the electrode with positive potential was more effective than that with negative potential for positive-ion acceleration in laser induced plasma, or pulsed plasma, in which ions were induced with the Coulomb explosion following electrons. In addition, the ion-acceleration or deceleration strongly depended on conditions of pairs of inner diameter and electrodes gap.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.55-55
• /
• 2007

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2163-2165
• /
• 2005

A pulsed laser ablation deposition (PLAD) technique has been used for producing fine particle as well as thin film at relatively low substrate temperatures. However, in order to manufacture and evaluate such materials in detail, motions of plume particles generated by laser ablation have to be understood and interactions between the particles by ablation and gas plasma have to be clarified. Therefore, this paper was focused on the understanding of plume motion in laser ablation assisted by Ar plasma at 50(mTorr). Two-dimensional hybrid model consisting of fluid and particle models was developed and three kinds of plume particles which are carbon atom (C), ion $(C^+)$ and electron were considered in the calculation of particle method It was obtained that ablated $C^+$ was electrically captured in Ar plasmas by strong electric field (E). The difference between motions of the ablated electrons and $C^+$ made E strong and the collisional processes active.

• 대한의용생체공학회:의공학회지
• /
• 제20권2호
• /
• pp.231-236
• /
• 1999

Q-switch된 Er:YAG 레이저를 이용해서 치아표면에 뿜어준 외부의 물로 인해 유도된 열 및 역학적인 효과를 이해하는 것은 free-running Er:YAG 레이저에 의한 절삭효과를 이해하는데 대단히 중요하다. 이는 (파장 하나의 길이가 250 $\mu\textrm{s}$인) free-running 레이저에 의한 한 거 대효과가 본 실험에서 이용한 (파장 하나의 길이가 1 $\mu\textrm{s}$인) Q-switch된 레이저에 의한 미소효과들의 축적이기 때문이다. 치아표면에 물이 있을 때 Q-Switch된 레이저에 의한 절삭률은 그렇치 않은 때에 비해 증가되었다. 치아표면에 물을 뿜어주는 횟수는 절삭률에 영향을 미쳐서 저에너지에서는 더디게 물을 뿜어줄때 놀은 절삭률을 얻었다. 반동압력의 세기는 치아표면 조건에 의존하는데. 표면이 젖을수록 그리고 뿜어준 물의 양이 증가 할 수록, 반동압력의 세기 또한 증가하였다. 이 연구로부터 우리는 1-$\mu\textrm{s}$-길이의 pulsed 레이저에 의해 유도된 열 및 역학적인 효과가 외부에 물이 있을 때 free-running Er:YAG 레이저에 의한 절삭을 이해하는데 중요한 정보를 제공해 준다는 것을 알았다.

• 전기화학회지
• /
• 제15권4호
• /
• pp.236-241
• /
• 2012

일반적으로 그라파이트는 높은 결정성으로 인해 나노입자상으로 제조하기 어려우며 특히 표면에 친수성을 부여하기가 쉽지 않은 재료로 알려져 왔다. 본 연구에서는 박막 증착에 널리 활용되어 오던 펄스 레이저 어블레이션 기법을 액상에 적용하여 친수성이 부여된 그라파이트 나노입자를 합성하였다. 타겟으로는 그라파이트 로드를 사용하였으며 레이저 출력을 조절하며 액상에서 어블레이션을 실시한 결과 매우 높은 분산 안정성을 갖는 친수성 그라파이트 나노입자를 합성할 수 있었다. FT-IR 분석결과 합성된 친수성 그라파이트 나노입자는 카르복시기 및 카르보닐기 등이 나노입자의 형성과 동시에 표면에 도입된 것이 밝혀졌으며 이는 제타 포텐셜로도 확인할 수 있었다. 최종적으로 Polyethyleneglycol(PEG)과 컴포지트하여 아세톤 센서에 적용한 결과 기존의 카본 블랙 대비 우수한 감도를 나타내었다.