• Journal of Welding and Joining
• /
• v.25 no.4
• /
• pp.49-57
• /
• 2007

The optimization of the cladding parameters was studied to maximize the deposition efficiency in the laser cladding using a low power pulsed Nd:YAG laser. STS304 stainless steel plate and Co alloy powder were used as a substrate and powder for cladding, respectively. The six cladding parameters were selected through preliminary experiments and their effects on the deposition efficiency were analyzed statistically. Experiments were designed and carried out using the Taguchi experimental method using a L18 orthogonal array. It was found from the results of analysis of variance(ANOVA) that the powder feed position and powder feed angle had the most significant effects on the deposition efficiency, but the powder feed rate and laser focal position had nearly no effects. The deposition efficiency could be maximized at 0mm of the powder feed position and 50o of the powder feed angle in the experimental range. From this experimental analysis, a new laser cladding head with 20o of the powder feed angle was designed and manufactured. With a new laser cladding head, the highest deposition efficiency of 12.2% could be obtained.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1759-1761
• /
• 1996

Md:YAG laser has been used in many applications such as micromachining, nonlinear optical experiments, holography, and rangefinding. These applications quite often require operation of the laser at the $TEM_{00}$ mode since this mode produces the smallest beam divergence, the highest power density, and, hence, the highest brightness. In this study, a pinhole is put between a rod and a half mirror to make the $TEM_{00}$ mode, and then we measured the intensity distribution of the output beam as reducing the diameter of the pinhole from 6mm to 1.5mm. As a result, the optimum size of the pinhole fixed in a resonator to make the $TEM_{00}$ mode was obtained, and we found out that the output beam of the pulsed Nd:YAG laser with a single elliptical cavity has a Gaussian distribution.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.91-93
• /
• 2004

• Proceedings of the KWS Conference
• /
• 2002.05a
• /
• pp.62-64
• /
• 2002

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.256-258
• /
• 2005

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.187-189
• /
• 2007

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.283-289
• /
• 1995

레이저가 의학영역에서 사용된 후 구강내 연조직과 경조직 병소에 대한 임상적 적용에 관한 관심이 커져왔다. 레이저가 조사되는 부위에서는 대부분 연기가 발생한다. 이 경우 병원체가 존재하는 병소에 대한 레이저치료시 발생되는 연기속에 병원체가 포함되어 이Tekas 환자와 술자는 이의 흡입가능성이 크므로 균혈증 및 상기도나 호흡계의 의원성 감염이 유발될 수 있다. 저자는 레이저치료시 발생되는 연기속에 병원체가 포함되어 있는지의 여부를 규명하기위해 각각 10개의 실험군에 통기성 미생물인 Escherichia coli(E.coli)가 배양된 brain geart infusion (BHI) 배지와 E.coli 가 존재하는 치근단 병소를 실험적으로 만든 후 각각 pulsed Nd:YAG 레이저를 조사해 연기를 채취, 배양, 분석하여 다음과 같은 결과를 얻었다. 1. Pulsed Nd:YAG 레이저를 E. colir 배양된 agar substrate 와 실험적으로 만들어진 치근단부위의 E.coli 현탁액에 조사시 발생된 연기에서 처음 접종된 것과 같은 E.coli가 검출되었다. 2. 감염병소에 pulsed Nd:YAG 레이저를 조사시 발생되는 연기의 유해효과로부터 환자와 술자 및 보조자의 보호를 위해 효과적인 흡입기를 사용이 권장된다.

• Journal of Welding and Joining
• /
• v.22 no.1
• /
• pp.58-64
• /
• 2004

The control of the weld bead shape is important in laser welding of the small parts. The effects of laser welding parameters on the weld bead shape in the pulsed Nd:YAG laser welding of STS 304L material were investigated. Shielding gas type, flow rate, pumping voltage, pulse frequency, pulse width, focal position and overlap distance were selected as laser welding parameters. Experiments were designed and conducted using the Taguchi method which was a statistical experimental method. The weld bead width, penetration, area and aspect ratio were measured and analysed as the weld bead shape properties and the welding parameters were optimized to maximize the weld aspect ratio. Weld aspect ratio were greatly affected by the pulse width, pumping voltage and pulse frequency, and somewhat by the overlap distance, and little by the shielding gas type, flow rate and focal position. A confirmation experiment were conducted using the optimized welding parameters.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.3
• /
• pp.360-368
• /
• 1999

The paper describes spectroscopic characteristics of plasma induced in the pulsed YAG laser welding of alloys containing a large amount of volatile elements. The authors have conducted the spectroscopic analyses of laser induced Al-Mg alloys plasma in the air and argon atmosphere. In the air environment the identified spectra were atomic lines of Al, Mg, Cr, Mn, Cu, Fe and Zn and singly ionized Mg lines as well as the intense molecular spectra of ALO and MgO formed by chemi-cal reactions of evaporated Al and Mg atoms from the pool surface with oxygen in the air. In argon atmosphere MgO and AlO spectra vanished but AlH spectrum was detected. the hydrogen source was presumable hydrogen dissolved in the base metals water absorbed on the surface oxide layer or $H_2$ and $H_2O$ in the shielding gas. The resonant lines of Al and Mg were strongly self-absorbed in particular self-absorption of the Mg line was predominant. These results show that the laser induced plasma was made of metallic vapor with relatively low temperature and high density.