• Computers and Concrete
• /
• 제8권5호
• /
• pp.491-510
• /
• 2011

Before deciding if structures exposed to high temperature are to be repaired or demolished, their final state should be carefully examined. Destructive and non-destructive testing methods are generally applied for this purpose. Compressive strength and color change in mortars are observed as a result of the effects of high temperature. In this study, ordinary and pozzolan-added mortar samples were produced using different aggregates, and exposed to 100, 200, 300, 600, 900 and $1200^{\circ}C$. The samples were divided into two groups and cooled to room temperature in water and air separately. Compression tests were carried out on these samples, and the color change was evaluated by the Munsell Color System. The relationships between the change in compressive strength and color of mortars were determined by using a multi-layered feed-forward Neural Network model trained with the back-propagation algorithm. The results showed that providing accurate estimates of compressive strength by using the color components and ultrasonic pulse velocity design parameters were possible using the approach adopted in this study.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.93-99
• /
• 1998

The chirping characteristics of InGaAsP electroabsorption modulatiors have been analyzed. The effective .alpha. parameters for large signal modulation were estimated by comparing the pulse shape after fiber transmission with constant chirping assumption.We investigated the structure and the operating condition of the modulator to improve the chirping characteristics. The .alpha. parameters were calculated as the function of wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning were preferred. An negative .alpha. value is achieved at the wavelength detuning below 30meV with a proper bias voltage so that pulse compression effect was expected.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.637-641
• /
• 1989

We have developed 3-stage of Magnetic Switch System based on the nonlinearities of ferromagnetic material used in the saturable inductor, and made experiment of parameter optimization and output stabilization of Magnetic Switch System. The cross-section and conductor burns of each satarable inductor were optimized 30 $cm^2$ 19.25 $cm^2$ 5, and 25 $cm^2$ 2, respectively. With this condition, 6.2 us [FWHM], 96 A pulse at first stage was compressed into 0.4 us[FWHM], 1.61 kA pulse at last stage. The current gain and compression ratio were 16.8, 17, respectively. ln addition, System output was stabilized with reset current of 6 A, 200 us.

• 대한임베디드공학회논문지
• /
• 제10권2호
• /
• pp.57-64
• /
• 2015

In this paper, we propose structures and power spectral densities of UWB radar transmitters of Short Range Automobile. While the conventional transmitters did not consider interferences from self and other automobiles, the proposed method of this paper can minimize interferences. First, we compare a structure of the proposed method with pulse train and pulse compression method. Then, by using mathematical analysis and computer simulations, we show that the proposed method is superior to others. Also we can set proper parameters in UWB radar's transmitter through the numerical method of mathematical results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1274-1276
• /
• 2000

크로징 스위치인 아바란치 트랜지스터를 사용하여 수 나노$\sim$수십 나노초의 고전압 펄스를 만들 수 있다. 반도체소자의 발전으로 인하여 빠른 회복시간을 갖는 소자가 개발되어 다이오드를 이용한 오프닝 스위치로도 수 나노$\sim$수십 나노초의 고전압 펄스를 얻을 수 있게 되었다. 본 논문에서는 전자총 그리드 펄서를 개발하기 위하여 자기스위치를 사용한 펄스압축기술(MPC : magnetic pulse compression)과 SOS (semiconductor opening switch)다이오드를 이용한 펄스 발생기에 관한 연구를 수행하였고 실험결과로 $50{\Omega}$부하에 대하여 3 kV, 26 nsec 펄스를 얻었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.291-296
• /
• 2006

The restrictions concerning the use of the radio waves have become severe, the marine radar with low spurious is being developed. Therefore, it is necessary to develop aids to navigation as a radar beacon can respond to new type of marine radar. Because the system of radar in the future is an indetermination, new radar beacon should correspond to old and new radar system during a transition period. New radar beacon that is also able to respond to pulse radar, pulse compression radar and FM-CW radar were considered in these years in Japan. The sign of the response of Morse code in a new system is generated by the delay synthesis system. Computer simulation and actual examination using trial circuit were curried out. A big possibility was set up in the development of the new radar beacon that was able to correspond to old and new radar system. These results and the state of new radar beacon is mentioned in this paper.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1722-1731
• /
• 2000

본 논문에서는 TDM 및 TDM/WDM 혼합형 광 ATM 스위치 구조에서 핵심 기능모듈인 광 셀 압축기와 역압축기를 새로이 제안하였다. 제안된 구조는 압축 및 역압축시 SOA 게이트와 광 궤환루프를 적용함으로써 구현을 위한 하드웨어를 줄였으며, 소수의 단을 직렬연결시 대용량의 광 펄스열을 압축 및 역압축할 수 있다. 제안된 광셀 압축기 구조를 이용한 4비트 단위 광 펄스 압축실험을 통해 시스템 적용을 구체화하였다.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.14-19
• /
• 2014

The flow characteristics of inertance pulse tube cryocooler(IPTC) was investigated with a computational thermal fluid dynamics for the reciprocating flow in IPTC including the piston movement of linear compressor. Two dimensional axisymmetric modeling was applied for the flow in an IPTC with a clearance between the piston and cylinder wall of linear compressor. The pressure, velocity, and temperature distribution were examined for the steady state. These were compared with previous results to confirm the validity in the modeling and computational results. The leakage between piston and cylinder wall affect the cooling capacity seriously. The dependence on mesh numbers were also examined to obtain a proper mesh numbers to improve the accuracy of calculation, which showed significant effect on the results. The user-defined function was used for the process of compression and expansion of piston.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.93-98
• /
• 2003

디지털 신호처리기에 대한 성능향상과 더불어 레이더 펄스 압축기 또한 디지털 처리방식이 점점 일반화 되어가고 있다. 디지털 펄스압축기는 FIR(finite impulse response) 필터 알고리즘을 이용한 시간영역 처리방식 또는 FFT(fast Fourier transform) 알고리즘을 이용한 주파수영역 처리방식으로 구현될 수 있다. 본 논문에서는 다중 DSP(digital signal processor)론 이용하여 확장성이 용이한 디지털 펄스압축기를 구성하고, 아날로그 디바이스사의 ADSP-21060을 적용하여 수신 거리 셀 및 FIR 필터 탭(tap) 수에 따른 펄스압축 연산시간을 E-언어와 어셈블리 언어로 시간영역에서 비교·분석하였다. 분석결과를 적용함으로써, 레이더의 시스템 파라미터가 정해지는 경우 펄스압축기 구성에 소요되는 DSP 수를 쉽게 예측할 수 있음을 확인하였다.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.504-511
• /
• 2008

This paper proposes an ultrasonic measurement method for measurement of linear interfacial stiffness of contacting surface between two steel plates subjected to nominal compression pressures. Interfacial stiffness was evaluated by using shear waves reflected at contact interface of two identical solid plates. Three consecutive reflection waves from solid-solid surface are captured by pulse-echo method to evaluate the state of contact interface. A non-dimensional parameter defined as the ratio of their peak-to-peak amplitudes are formulated and used to calculate the quantitative stiffness of interface. Mathematical model for 1-D wave propagation across interfaces is developed to formulate the reflection and transmission waves across the interface and to determine the interfacial stiffness. Two identical plates are fabricated and assembled to form contacting surface and to measure interfacial stiffness at different states of contact pressure by means of bolt fastening. It is found from experiment that the amplitude of interfacial stiffness is dependent on the pressure and successfully determined by employing pulse-echo ultrasonic method without measuring through-transmission waves.