• 센서학회지
• /
• 제27권1호
• /
• pp.6-12
• /
• 2018

In this paper, a 32-variable pulse position modulation (32-VPPM) scheme is proposed to support a red-green-blue light-emitting-diode (RGB-LED)-based optical camera communication (OCC) system. Our proposed modulation scheme is designed to enhance the OCC data transmission rate, which is targeted for the wearable biomedical data monitoring system. The OCC technology has been utilized as an alternative solution to the radio frequency (RF) wireless system for long-term self-healthcare monitoring. Different biomedical signals, such as electrocardiograms, photoplethysmograms, and respiration signals are being monitored and transmitted wirelessly from the wearable biomedical device to the smartphone receiver. A common 30 frames per second (fps) smartphone camera with a CMOS image sensor is used to record a transmitted optical signal. Moreover, the overall proposed system architecture, modulation scheme, and data demodulation are discussed in this paper. The experimental result shows that the proposed system is able to achieve > 9 kbps using only a common smartphone camera receiver.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.76-79
• /
• 2015

Visible light communication (VLC) is a short range optical communication technology using light emitting diodes. In this paper, we implement variable pulse position modulation (VPPM) defined in the IEEE 802.15.7 standard with a Cortex-M processor, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The synchronization procedure between the transmitter and receiver is not defined clearly in the VPPM standard. In order to synchronize the transmitter and receiver easily, two overhead bits are used including one start bit and one stop bit modulated by on-off keying (OOK). Experimental results under various environmental conditions show that the proposed VPPM can support a seamless 100 Kbps data rate with 10 levels in the dimming control.

• 한국인터넷방송통신학회논문지
• /
• 제9권2호
• /
• pp.117-122
• /
• 2009

본 논문에서는 다중 안테나 (Multiple-Antenna)를 적용한 초광대역 무선통신 (UWB: Ultra Wide-Band) 시스템에서 이중 이진 터보 부호의 성능을 보인다. 본 논문에서는 PPM-TH (Pulse Position Modulation-Time Hopping) 방식과 PAM-DS (Pulse Amplitude Modulation-Direct Sequence) 방식의 UWB 시스템을 모두 고려하였으며, 다중 안테나 기술로 시공간 블록 부호 (STBC : Space Time Block Code) 송신 다이버시티와 수신 다이버시티 기술을 적용하였다. 그리고 이진 터보 부호에 비해서 부호어 사이의 최소 거리 (Minimum Distance)가 길어서 복호 성능이 좋으며 처리량 (Throughput)이 높아서 복호 처리 시간이 짧은 장점을 가지고 있는 이진 이중 터보 부호를 적용하였다. 본 논문의 결과는 UWB 시스템을 구현하는데 적용될 수 있다.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.619-625
• /
• 2013

Switched mode power supplies (SMPS) are power electronic circuits extensively used in a wide range of applications. High frequency switching operation of SMPS causes electromagnetic emissions and has the potential to interfere with system operation, which in turn has an impact on system performance. This makes electromagnetic compatibility (EMC) an important concern. In this paper, a new and simple spread spectrum technique is proposed by modulating chaotic pulse position modulation (CPPM) and pulse width modulation (PWM). The resulting CPWM is implemented to reduce the conducted EMI in SMPS. The proposed method is found to be effective in reducing conduction EMI. The effectiveness and simplicity of the proposed method on spreading those dominating frequencies is compared to the EMI mitigation technique using an external chaotic generator. Finally, the levels of conductive EMI with standard PWM, CPWM with an external chaos generator and the proposed method are experimentally verified to comply with the CISPR 22A regulations. The results confirm the effectiveness of the proposed method.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.109-116
• /
• 1998

This paper is concerned with effective operating method of pneumatic on-off valves for improving position control accuracy, valve life-time and position settling time using modified pulse width modulation with dead-zone (MPWMD). The pneumatic system using on-off valves has advantage of simple construction and low cost compared with a system with servo-valves. The performance of the proposed control method is investigated experimentally for the position control of a pneumatic cylinder using on-off valves. Experimental results show that the proposed algorithm for valve operation can be used to obtain fast and accurate position control compared to the conventional PWMD algorithm. It is also shown that the use of the proposed MPWMD algorithm for the position control significantly reduces the number of valve switching and noise.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.30-34
• /
• 2008

In this paper, we analyze the performance of pulse position modulation-time hopping ultra wide band (PPM-TH UWB) systems with antenna diversity technique in indoor wireless channel. A modified Saleh and Valenzuela (SV) model is adopted as a UWB indoor channel model. Perfect synchronization between a transmitter and a receiver is assumed. Therefore, coherent equal gain combining (EGC) scheme to collect the energy available in the multipath components is investigated. It is shown that the performance is improved by increasing the number of antennas at the receiver. The results of this paper can be applied to the applications of UWB.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1276-1291
• /
• 2014

In the field of visible light communication (VLC), light-emitting diodes (LEDs) are used for transmitting data via visible light. In this study, we analyze pulse dual slope modulation (PDSM) as a means of delivering information in VLC. PDSM involves the modulation of symmetrical slope pulses to encode binary 0s and 1s, and owing to the moderately increasing and decreasing pulse shapes that are created, this method enables more spectral efficiency than the variable pulse position modulation (VPPM) technique currently adopted in IEEE 802.15.7. In particular, PDSM allows for the avoidance of intra-frame flicker by providing idle pulses in a spectrum-efficient way. A simple detection scheme is proposed for PDSMsignals, and its bit error rate (BER) is analyzed mathematically at varying slopes to validate the process through simulation. The BER performance of PDSM detection using dual sampling is compared to the performances of PDSM and VPPM using correlation detection. It is found that, when the probability of idle pulse transmission is less than 0.08 and higher than 0, the BER of dual sampling PDSM is lower than that of PDSM using correlation detection over the entire light intensity range.

• 한국전자파학회논문지
• /
• 제14권2호
• /
• pp.139-147
• /
• 2003

본 논문에서는 FCC에서 제정한 허용 주파수 대역 내에서 100 Mbps급 M-ary PPM/TH UWB 시스템 설계를 위한 특성 파라미터의 규격을 제안하고, AWGN 채널에서 제안된 시스템의 성능을 분석하였다. 성능 분석 결과, 이 시스템에 적용 가능한 펄스 주기는 매우 한정적이며, 시스템의 데이터 전송률을 일정하게 할 경우, M과 펄스반복 개수가 증가할수록 시스템 성능은 개선되고, 사용자 수는 감소됨을 관측하였다.

• 한국위성정보통신학회논문지
• /
• 제7권3호
• /
• pp.41-46
• /
• 2012

LED 기반 가시광 통신 시스템은 RF통신과 달리 인체에 무해하며, 주파수 허가를 받을 필요가 없고, 보안 특성이 우수하며, 넓은 가시광 대역을 사용할 수 있는 시스템이다. 하지만 LED 발광을 조명과 광 데이터 전송으로 동시에 사용하기 위해 깜박거림 방지와 밝기 조절 기능의 구현이 요구되는데 이때 code rate의 열화가 발생한다. 따라서 고속 멀티미디어 데이터 전송을 위해 본 논문에서 가시광 통신 시스템에서 적용 가능한 line coding기법 Symbolic-PPM(Pulse Position Modulation)을 제안하고 기존의 VPPM(Variable Pulse Position Modulation) 기법과 비교하여 깜박거림 방지 및 밝기 조절 기능을 구현 한 상태에서 고속 데이터 전송을 위한 전송 효율 증가 효과를 모의실험을 통하여 검증하였다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1355-1362
• /
• 2007

본 논문에서는 태양광 발전의 효율을 높이기 위하여 센서와 마이크로프로세서를 이용한 태양광 위치추적 장치를 설계하여 고정 방식의 태양광 발전과 위치 추적 방식의 태양광 발전에 대하여 비교해 보았으며, 태양전지에 대한 특성 해석과 수학적 모델링을 통한 시뮬레이션을 행하여 태양전지 특성 사양과 비교해 보았다. 또한 전력변환 시스템을 Boost 컨버터와 전압형 인버터로 구성하여 각각에 대하여 실험하였으며, Boost 컨버터 제어에서 최대 전력점 추적을 위해 일정전압 제어법을 사용하였다. 인버터의 제어에서는 SPWM(Sinusoidal Pulse Width Modulation) 제어법을 사용하여 실험하여 좋은 결과를 나타내었다.