• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.83-85
• /
• 2007

A new approach on identifying a first-order plus time-delay (FOPTD) model using finite--duration pulse inputs has been presented recently [1]. The identification methods are very simple because it is enough to observe only two extremes and the time when they occur in the transient response to pulse input. However, when there is mismatch between actual system and FOPTD model. how sensitive the methods are has not been studied. In this paper, we investigate robustness issue of those identification algorithms in the presence of the model structure mismatch and uncertainties. Through an example we will demonstrate it.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.100-105
• /
• 2002

In order to investigate how the chassis frame stiffness including body structure affects vehicle handling characteristics, in this paper, objective test evaluations such as steady state circle maneuvering test and pulse input transient test are performed. The basic steer characteristics can be obtained from stability factor and 4 parameter method is used to evaluate vehicle handling characteristics between original vehicle and the other with reinforced chassis. The result shows that vehicle with reinforced chassis has advantages in handling characteristics.

• Structural Engineering and Mechanics
• /
• 제7권3호
• /
• pp.331-344
• /
• 1999

This paper provides an analysis of the transient behaviour of a right-angled bent cantilever beam subjected to a suddenly applied force at its tip perpendicular to its plane. Based on a rigid, perfectly plastic material model, a double-hinge mechanism is required to complete the possible deformation under a rectangular force pulse (constant force applied for a finite duration) with a four-phase response mode. The kinematics of the various response phases are described and the partitioning of the input energy at the plastic hinges during the motion is evaluated.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1736-1742
• /
• 1989

In this thesis, to verify input-output characteristics of GaAs MESFET, light is illuminated to C-band oscillator which already designed and manufactured, thus input-output variation of GaAs MESFET is to be shown. Experimental results of two kinds of optical effects, optical tuning and opticla switching, of GaAs MESFET Oscillators are presented. For optical tuning, the Oscillation frequency decreases with optical illumination and the Oscillator power output generally increases with optical illumination, the increase being around 1 to 3 dBm at 1mW/mm\ulcornerlight intensity. While the DC-lingt illuminated Oscillator response data provide information of the optical senditivity of GaAs-MESFET Oscillators. Pulse-light illuminated transient response data can be invoked to understand the detailed optical-electrical interaction mechanisms response. Thus, it is shown that direct control of micro-devices is realisable, if we use optical effect of GaAs semiconductor compound.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.576-581
• /
• 1997

DC-DC converter with chopper is seen to have problems, such as, loop instability and degradation of transient response, due to the interaction between input filter and switching regulator. In this paper, the switching regulator consisting of input filter and double chopper is analyzed, and the state space model at continuous current mode and the transfer function between duty ratio of switching pulse and output voltage are derived. The controller in this paper is designed as feedforward(P) and feedback(PI) control scheme to minimize the variation of output voltage, and computer simulation results are presented to show the performance of the proposed controller.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1551-1561
• /
• 2014

Design, Simulation and experimental analysis of closed loop time domain based Discrete PWM buck-boost converter are described. To improve the transient response and dynamic stability of the proposed converter, Discrete PID controller is the most preferable one. Discrete controller does not require any precise analytical model of the system to be controlled. The control system of the converter is designed using digital PWM technique. The proposed controller improves the dynamic performance of the buck-boost converter by achieving a robust output voltage against load disturbances, input voltage variations and changes in circuit components. The converter is designed through simulation using MATLAB/Simulink and performance parameters are also measured. The discrete controller is implemented, and design goal is achieved and the same is verified against theoretical calculation using LabVIEW.