• 센서학회지
• /
• 제24권6호
• /
• pp.398-403
• /
• 2015

In this paper, the sine-wave and trigger pulse generator with capability of frequency high-resolution and time-variable trigger edge has implemented. It fulfills well the requirements for SS-OCT with frequency resolution of 1 Hz, frequency stability of ${\leq}{\pm}0.03Hz$ and time-variable trigger edge. Through its performance test applied to the wavelength swept laser, 90 nm, sweeping range and 10mW average optical power were obtained. This showes that the realized generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1106-1109
• /
• 2002

This paper introduces an improved pulse generator using power semiconductors. The proposed circuit consists of the series connected boost converter structure. In the presented circuits, high voltage pulse is generated by series-connection of capacitors and IGBTs. The charging of capacitors and voltage balance of IGBTs is done automatically. To verify the proposed circuit, 1kV, 25A pulse generator is manufactured and tested.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.273-279
• /
• 2000

Electrical repair method which has replaced laser repair method can replace defective cell by redundancy’s in the redundancy scheme of conventional high density memory. This electrical repair circuit consists of the antifuse program/read/latch circuits, a clock generator a negative voltage generator a power-up pulse circuit a special address mux and etc. The measured program voltage of made antifuses was 7.2~7.5V and the resistance of programmed antifuses was below 500 Ω. The period of clock generator was about 30 ns. The output voltage of a negative voltage generator was about 4.3 V and the current capacity was maximum 825 $mutextrm{A}$. An antifuse was programmed using by the electric potential difference between supply-voltage (3.3 V) and output voltage generator. The output pulse width of a power-up pulse circuit was 30 ns ~ 1$mutextrm{s}$ with the variation of power-up time. The programmed antifuse resistance required below 44 ㏀ from the simulation of antifuse program/read/latch circuit. Therefore the electrical repair circuit behaved safely and the yield of high densitymemory will be increased by using the circuit.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.184.1-184.1
• /
• 2013

It is generally known that electron beam has sterilization effects and can activate plant germination and growth. Compared to electron beam, electrical pulse has not been frequently studied with respect to the biological application. In this study, we have analyzed the effects of high voltage pulse on seed germination and growth using various plant species. We have used the high voltage generator for examining seed's responses to the high voltage pulse. The operating voltage and currents of the generator are about 300 kV and 30 kA, respectively. Pulse width is 60 ns. High voltage pulse has slightly activated germination and growth of radish during early stage. Various levels of germination and growth are observed in different plant species after treated with high voltage pulse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1370_1372
• /
• 2009

A conventional linear accelerator system requires a flat-topped pulse with less than $\pm$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A a line-type pulsed modulator is widely used in pulsed power circuits for applications such as accelerators, radar, medical radiation, or ionization systems. The high-voltage pulse generator system with an output voltage of 284 kV, a pulse width of $10{\mu}s$, and a rise time of $0.84{\mu}s$ has been designed and fabricated to drive a klystron which has 30-MW peak and 60-kW average RF output power. The high-voltage test was performed using the klystron load. This thesis describes the design and test results of high-power pulse generator system for industrial accelerator application. The experimental results were analyzed and compared with the design.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.568-572
• /
• 2003

A longitudinal discharge heated copper vapor laser with internal diameter 28 mm and discharge length 1.3 m has been constructed and tested. At the discharging voltage 15.2 kV, pulse repetition rate 10 kHz, buffer gas pressure 40 mbar, and internal temperature of the laser plasma tube $1520^{\circ}C$, it delivers more than 30 W average laser outputs.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.377-385
• /
• 2001

물을 전기분해하여 얻은 일정 부피비를 갖는 수소와 산소 혼합가스를 수산화가스로 명명하며, 이를 역반응시켜서 열 에너지원으로 사용하고 있다. 수산화가스는 경제성, 안전성 및 환경친화적인 고유한 특성을 지니고 있어서 현재 가스용접기에 적용하고 있으며 여러 가지 응용분야에 적용할 수 있도록 연구 중에 있다. 본 논문에서는 수산화가스의 특성에 관하여 고찰하고 발생기용 전원에 대하여 소개하고 이 중에서 아직까지 적용되지 않은 펄스전원을 적용하여 여러 가지 운전주파수에서 비교분석 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.677-681
• /
• 2014

A high voltage pulse generator was fabricated to radiate ultrawide band electromagnetic pulse. A coaxial type of Blumlein pulse forming line is employed to produce a pulse of high voltage (>300 kV) and short pulse duration (~5 ns). A helical strip/wire type of air-cored pulse transformer was used to charge the Blumlein pulse forming line up to more than 300 kV. A peaking switch is essential to make the pulse rise time as fast as possible. Typically, the rise time is ~500 ps. The output pulse of the generator is radiated into air through an exponentially tapered TEM horn antenna. The electric field intensity of a radiated pulse was measured as a function of the distance from the transmitting horn as well as the output voltage of the peaking switch. The peak-to-peak value of the electric field intensity at 10 m from the TEM antenna was~100 kV/m.

• Journal of Chest Surgery
• /
• 제9권2호
• /
• pp.265-270
• /
• 1976

Implantation of a permanent pacemaker is a widely accepted procedure for the patient with complete heart block.As a result of these device, the prognosis for patients with Adams-Stokes syndrome caused by complete A-V block and other cardiac arrhythmia have become much more optimistic. Permanent pacemaker implantation by means of a transvenous approach has made the operative risk much less and the procedure simpler. However, a number of complications have been reported in the literature regarding transvenous endocardial pacemaker implantation during the last a decade. The patient presented in this paper is a 26-year old girl who was implanted with a permanent pacemaker at 14 years of age because of a congenital A-V block. Following first exchange of pulse generator, the electrode (lead) was fractured, so that by the pulse generator, a change to the transvenous technique of implantation was made, After this, there were episodes of recurrent wound infection on three occasions, even though the site of pulse generator implantation was exchanged to the contralateral side of chest wall, massive doses of antibiotics were administered and sensitivity tests for coagulase positive staphylococcal infection were performed. Though there was no definite evidence of blood stream infection by blood culture, we decided not to use the transvenous technique and not to implant the pulse generator in the chest wall because the venous system and the entire anterior chest wall appeared to be diseased or contaminated by virulent pyogenic organisms. Finally this intractable systemic and local wound infection was successfully controlled by myocardial lead implantation via a subxiphoid approach and implantation of the pulse generator far down in the abdominal wall. The causes and routes of recurrent wound infection and possible blood born infection in this particular patient are still obscure. We strongly believe that myocardial pacemaker implantation is much safer than transvenous endocardial pacemaker implantation & myocardial pacemaker implantation is a definite method for controlling such an intractable wound infection. following transvenous pacemaker implantation.

• 대한전자공학회논문지TC
• /
• 제42권6호
• /
• pp.61-66
• /
• 2005

본 논문에서는 Step recovery diode와 반도체 레이저의 이득 스위칭을 이용하여 UWB(Ultra Wide Band) 통신 시스템의 구성요소 중 하나인 임펄스 발생기를 설계하였다. 구현된 임펄스 발생기는 4부분으로 구성하였으며, 1번째는 SRD를 이용하여 반도체 레이저의 이득스위칭을 위한 1차 임펄스 발생기, 2번째는 출력된 1차 임펄스를 이득 스위칭을 조건에 맞추기 위한 전류조절기, 3번째는 1차 임펄스 발생기에서 출력된 임펄스를 반도체 레이저의 이득 스위칭을 이용하여 가우시안 펄스를 발생하는 2차 임펄스 발생기, 4번째는 구현된 가우시안 펄스를 UWB를 위한 가우시안 모노펄스로 변환하는 펄스 변환부로 구성되어 있다. 측정된 가우시안 모노펄스는 시간상에서 360 psec의 펄스폭과 -70 mV에서 +50 mV의 크기를 가지며, 주파수상에서 -41 dBm의 크기와 3.6 GHz의 대역폭을 가짐으로써 UWB를 위한 임펄스에 적합함을 확인하였다.