• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.197-204
• /
• 2014

In this paper an Improved Zero Voltage Zero Current Pulse Width Modulation Forward converter which employs a simple resonance snubber circuit is introduced. A simple snubber circuit consists of a capacitor, an inductor and two diodes. In proposed converter, switch Q1 operates at ZCS turn-on, and ZVS turn-off conditions and all-passive semiconductor devices operate at ZVZCS turn-on and turn-off state. The proposed converter is analyzed and various operating modes of the ZVZCS-PWM forward converter are discussed. Analysis and design considerations are presented and the prototype experimental results of a 100w (40 V/2.5A) proposed converter operating at 30 KHz switching frequency confirm the validity of theoretical analysis.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.21-27
• /
• 2011

In this paper, an approach to reduce common-mode voltage (CMV) at the output of multilevel inverters using a phase opposition disposed (POD) sinusoidal pulse width modulation (SPWM) technique is proposed. The SPWM technique does not require computations therefore, this technique is easy to implement on-line in digital controllers. A good tradeoff between the quality of the output voltage and the magnitude of the CMV is achieved in this paper. This paper realizes the implementation of a POD-SPWM technique to reduce CMV using a five-level diode clamped inverter for a three phase induction motor. Experimental and simulation results demonstrate the feasibility of the proposed technique.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.448-457
• /
• 2012

This paper proposes a carrier-based pulse width modulation (PWM) method to control an indirect matrix converter (IMC) by analyzing the relationship between the space vector PWM (SVPWM) and the carrier-based PWM. The complexity of the SVPWM method for an IMC can be reduced by using an equivalent carrier-based PWM method. The advantage of the proposed algorithm is its ability use only one symmetrical triangular carrier signal to generate the gate signals for all of the power switches in both the rectifier and inverter stages as compared to the conventional method where the carrier signal used in the rectifier stage is different from that of the inverter stage. In addition, by using a suitable offset voltage component in the modulation signals, the output voltage magnitude reaches 0.866 of the input voltage magnitude. Simulation and experimental results are provided in order to validate the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.455-455
• /
• 2000

A novel pulse-width-modulated (PWM) function is introduced for precise position measurement in an enclosed signal field. An amplitude modulation was used to light the LEDs for the conventional study. However, the transform properties from the driving signal to the lighting intensities of the LEDs are non-linear, and accurate control of the lighting power was necessary. Therefore, a lighting function independent of these properties is desired. Well-known PWM functions are used to construct the enclosed signal field by simulation, and the precision of the phase detecting system is analyzed. A novel "axial symmetry PWM" function is found to be effective for orthogonal pahse detection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.383-386
• /
• 1990

This paper concerns a DC-DC converter using the characteristic of series resonance. Operation principle of the system described by the proposed equation is illustrated. Characteristics of steady state of the system which is essential to system design is evaluated for frequency and pulse width characteristic using dimensionless parameter. The proposed circuit based in constant voltage control uses the Pulse Width Modulation - Time Ratio Control method.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.65-70
• /
• 2008

Capacitive position sensing with modulation technique is widely used in electrostatic actuator applications. To maximize the electrostatic force and the position-sensing gain, capacitors for driving and capacitors for sensing are shared, i.e, after applying the driving voltage with high-frequency modulating signals using op amps, the position is demodulated from the modulated signal. In high-voltage applications, however, low bandwidth of a high-voltage op amp hinders adding the high-frequency modulating signal to the driving voltage. In this paper, new and very simple driving and sensing method is proposed, in which the pulse-width modulated driving voltage eliminates the need of the high-frequency modulating signal for position sensing. This new algorithm is proved by the simulation results using Matlab/SIMULINK.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.382-386
• /
• 2012

A femtosecond laser with 775nm central wavelength and 150 fs of temporal pulse width was used for multi layered glass cutting applications. Ultrashort pulse was effectively used for clean glass cutting with $50{\mu}m$ depth and minimum cutting width. Laser beam was split to two stages and focused on the top surfaces of each layer. Ablation threshold of used glass was measured to be $2.59J/cm^2$. In experiments, 200mW laser power and 1mm/s scanning speed was used for preliminary experiment. Air gap was the major defect occurring parameter and laser power was less sensitive to glass cutting in the experiment. The maximum cutting speed was measured to be 60mm/min with 2kHz, however, Maximum 3m/min cutting speed can be achievable with a commercially available laser with 100kHz.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.41-50
• /
• 1998

In this study, to investigate a characteristics of slip ratio control of H.C.U for ABS, half car model tester were developed and a new H.C.U. was compactly designed comparing to the commercical H.C.U. for ABS. In half car model tester, variable inertia wheel has been used to load the car weights and braking forces according to the road surface conditions which were realized by pneumatic cylinder. And solenoid valves using P.W.M. (Pulse Width Modulation) method were installed in the new H.C.U The slip ratio characteristics of tire had been measured using half car model tester and the results were used in the control simulation for a new H.C.U.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2001년도 하계 학술대회 논문집(KISPS SUMMER CONFERENCE 2001
• /
• pp.9-12
• /
• 2001

DS/CDMA 시스템에서는 여러 채널의 신호를 더하여 전송하는 경우 신호의 레벨 수가 증가하여 높은 선형성의 전력증폭기의 사용이 요구된다. 펄스폭변조(Pulse Width: PW)/CDMA 시스템은 여러 채널의 데이터가 더해져서 만들어진 멀티레벨 신호를 펄스폭 변조를 하여 전송하는 방식으로, 신호의 레벨이 binary 형태로 유지되어 전력증폭기의 변복조 회로가 단순해지는 장점이 있다. 본 논문에서는 AWGN 잡음환경 하에서 PW/CDMA 시스템의 비트오율 특성을 해석적으로 유도하여 DS/CDMA 시스템과 비교하였으며, 유도한 결과를 시뮬레이션을 통하여 확인하였다.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.538-541
• /
• 2016

This paper proposes an LCL-filter design for space vector pulse width modulation (SVM) in grid-connected three-phase inverter systems. Although there are a several studies in progress, the existing methods are erroneous because they do not focus on the other switching methods. This paper presents the design methodology for an LCL-filter that is optimized for SVM switching operations. The design procedure for the LCL-filter is presented step-by-step. The inverter-side inductor was determined by an analysis of the ripple components, mathematically. Based on the reactive power absorption ratio, the filter capacitor was determined. The grid-side inductor was determined by the ripple attenuation factor of the output current. Experimental results verify the validity of the design method for the LCL-filter.