• 제목/요약/키워드: Pulse Mode

검색결과 753건 처리시간 0.025초

위상 변조 및 첩 보상에 의한 초단 펄스 발생 (Short Pulse Generation Based on Phase Modulation and Chirp Compensation)

  • 전희정;임용훈;서동선;명승일;김호영
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2002년도 제13회 정기총회 및 2002년도 동계학술발표회
    • /
    • pp.174-175
    • /
    • 2002
  • We generate short optical pulses of ∼ 6 picoseconds at 10 GHz by chirped pulse compression based on phase modulation and chirp compensation. In the suggested method, sinusoidally driven intensity and phase modulators generate chirped pulses which are subsequently suppressed by chirp compensation using a single mode fiber.

  • PDF

2중 영 벡터 모드를 갖는 2상 개별 펄스 위치 변조기법 (A Two-Phase Separately Randomized Pulse Position PWM Technique with Double-Zero Vector Mode)

  • 김정근;오승열;정영국;임영철
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권12호
    • /
    • pp.739-750
    • /
    • 2004
  • In case while M(modulation index) is more than 0.7, the spectrum of motor voltage and current of a conventional two-phase SRP-PWM scheme are not reduced considerably. To solve the problems of a conventional two-phase SRP-PWM, this paper proposes a two-phase SRP-PWM(DZSRP-PWM) with double zero vector mode which zero vector is selected as V(111) in case of M >0.7, and zero vector is selected as V(000) if M < 0.7. For the validity of the proposed method, the PSIM simulations and experiments were achieved. And the simulation and experiment results show that the voltage and current harmonics all over the modulation index are spread to a wide band area.

단순화된 다중 모드 방법을 이용한 음성 부호화기 (A Speech Coder using the Simplified Multi-mode Method)

  • 강홍구
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1995년도 제12회 음성통신 및 신호처리 워크샵 논문집 (SCAS 12권 1호)
    • /
    • pp.146-149
    • /
    • 1995
  • This paper proposes a SM-CELP speech coder which applies different excitation signal according to the characteristic of speech segment at bit-rate below 4 kbps. Speech signal is divided with 2 modes such as stationary voice and etc. using the parameters of average energy of the short-time speech and the residual signal after long term prediction. Structured multi-pulse method is used for the excitation of mode-A and gaussian or pulse-like codebook for mode-B. 4.8kbps DoD-CELP are used to evaluate the performance of the proposed coder. As a result, the propose method shows 1~2 dB higher segmental signal to noise ratio and better subjectional quality without increasing the computational amount.

  • PDF

Multilevel Inverter to Reduce Common Mode Voltage in AC Motor Drives Using SPWM Technique

  • Renge, Mohan M.;Suryawanshi, Hiralal M.
    • Journal of Power Electronics
    • /
    • 제11권1호
    • /
    • pp.21-27
    • /
    • 2011
  • In this paper, an approach to reduce common-mode voltage (CMV) at the output of multilevel inverters using a phase opposition disposed (POD) sinusoidal pulse width modulation (SPWM) technique is proposed. The SPWM technique does not require computations therefore, this technique is easy to implement on-line in digital controllers. A good tradeoff between the quality of the output voltage and the magnitude of the CMV is achieved in this paper. This paper realizes the implementation of a POD-SPWM technique to reduce CMV using a five-level diode clamped inverter for a three phase induction motor. Experimental and simulation results demonstrate the feasibility of the proposed technique.

Repetition-Rate Multiplication of a 10-GHz Mode-Locked Laser via Coding the Spectral Intensity and Phase

  • Kim, Ik Hwan;Cho, Il Hwan;Hong, Sang Jeen;Seo, Dong-Sun
    • Journal of the Optical Society of Korea
    • /
    • 제18권5호
    • /
    • pp.611-615
    • /
    • 2014
  • We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

EMTP를 이용한 GIS내 부분방전 펄스의 감쇠특성 해석 (Analysis of Partial Discharge Pulse Damping Characteristics in GIS Using EMTP)

  • 이도훈;김재철;송승엽;신중은;노광현;김광화
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2003년도 학술대회논문집
    • /
    • pp.103-105
    • /
    • 2003
  • The principle of the ultra-high frequency (UHF) method to detect partial discharge(PD) in GIS is to measure the UHF electromagnetic waves excited by PD pulses. Such electromagnetic waves propagate along the GIS busbar in the TEM-mode, TE-mode, TM-mode. And the coaxial busbar of the GIS acts as a waveguide in which the UHF electromagnetic waves travel. This paper was studied the analysis on damping characteristic of electromagnetic waves excited by PD in GIS and presented the method to yield the cutoff frequency for determine the minimum band of sensor that detect the PD pulse.

  • PDF

변조지수에 따른 공통모드 전압 저감 PWM 기법 성능 비교 (Performance Comparison of Common-Mode Voltage Reduction PWM Methods in Terms of Modulation Index)

  • 허건;박용순
    • 전력전자학회논문지
    • /
    • 제26권2호
    • /
    • pp.135-140
    • /
    • 2021
  • This study introduces a new pulse width modulation (PWM) method to reduce common-mode voltages (CMVs) and then compares its performance with other reduced CMV-PWM (RCMV-PWM) methods. CMVs should be reduced to ensure the electromagnetic compatibility and safety of grid-connected inverters. RCMV-PWM methods attempt to synthesize voltage references without zero vectors, which cause high CMV peaks. In these methods, the peak-to-peak magnitude of CMVs can be reduced by one-third of the conventional space-vector PWM. The introduced method splits every reference vector into two vectors to avoid the use of zero vectors. The performances of the RCMV-PWM methods are analyzed in accordance with the modulation index through simulation and experiment.

극초단 펄스 Cr4+:YAG 레이저의 제작 및 동작 특성 (Construction and operational characteristics of a Ultra-Short pulse Cr4+:YAG laser)

  • 이봉연;이동한;이치원;윤석범;추한태
    • 한국광학회지
    • /
    • 제15권5호
    • /
    • pp.455-460
    • /
    • 2004
  • 1.064 $\mu\textrm{m}$ 파장의 연속발진 Nd:YAG 레이저를 펌핑 광원으로 하여 적외선 영역에서 광대역으로 파장 가변되는 연속발진 및 극초단펄스 C $r^{4+}$ :YAG 레이저를 자체 제작하였다. C $r^{4+}$ :YAG 레이저의 연속발진 및 펄스의 출력특성과 파장 가변 영역은 다음과 같다. 연속발진일 경우 1.436 $\mu\textrm{m}$에서 600 mW의 평균출력을 보였으나, 복굴절 필터를 삽입했을 경우는 1.492 $\mu\textrm{m}$근처에서 400 mW의 평균출력을 보였다. 펄스발진일 경우 1.436 $\mu\textrm{m}$에서 최초로 평균출력 320 mW의 모드록킹된 펄스가 발생하였지만 물 흡수대의 영향으로 불안정함을 피할 수 없었다. 따라서, 복굴절 필터를 사용하여 중심파장을 1.492 $\mu\textrm{m}$로 이동시켰으며 이 영역에서 안정한 상태의 모드록킹된 43 fs의 극초단 펄스를 생성하였다. 이 때의 평균출력은 280 mW이고, 반치폭(FWHM)은 45 nm이었다.

달 착륙선의 동역학 모델링 및 추력기 기반 제어기 설계 (Dynamic Modeling and Design of Controller based on Thrusters for Korean Lunar Module)

  • 양성욱;이상철
    • 한국항공운항학회지
    • /
    • 제23권1호
    • /
    • pp.49-55
    • /
    • 2015
  • This paper deals with dynamic modeling and controller design of a future Korean lunar module planned to be launched 2020's in Korea. For dynamic modeling of the lunar module, we first assume the lunar module as a rigid body. And we derive equations of motion for the lunar module by considering allocation of main thrusters and reaction thrusters. With the equation of motion, we design the controller based on the quaternion. A Pulse Width Pulse Frequency modulator(PWPFM) is selected for generating on/off signal. Finally, we construct a 2-phase descent mode including initial guidance mode, terminal guidance mode. The MATLAB simulation is performed for evaluating the descent ability and final landing velocity. The dynamic modeling and descent simulation of the lunar module in this paper could be applied for developing the future work of the Korean lunar exploration program.

Input Impedances of PWM DC-DC Converters: Unified Analysis and Application Example

  • Pidaparthy, Syam Kumar;Choi, Byungcho
    • Journal of Power Electronics
    • /
    • 제16권6호
    • /
    • pp.2045-2056
    • /
    • 2016
  • The input impedances of pulse width modulated (PWM) dc-to-dc converters, which dictate the outcomes of the dynamic interaction between dc-to-dc converters and their source subsystem, are analyzed in a general and unified manner. The input impedances of three basic PWM dc-to-dc converters are derived with both voltage mode control and current mode control. This paper presents the analytical expressions of the 24 input impedances of three basic PWM dc-to-dc converters with the two different control schemes in a factorized time-constant form. It also provides a comprehensive reference for future dynamic interaction analyses requiring knowledge of the converters' input impedances. The theoretical predictions of the paper are all supported by measurements on prototype dc-to-dc converters. The use of the presented results is demonstrated via a practical application example, which analyzes the small-signal dynamics of an input-filter coupled current-mode controlled buck converter. This elucidates the theoretical background for the previously-reported eccentric behavior of the converter.