• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.173-178
• /
• 2010

전기철도는 전력공급시스템과 전기차로 구성되어 있다. 전기철도의 전기차는 대규모의 견인력을 얻을 수 있어 대량수송과 고속운전에 적합하다. 전기차는 모터블록과 견인전동기에 의해서 구동되며, 지령속도에 따라 모터블록에서 견인전동기에 전력을 공급하여 속도가 제어된다. 전기차의 속도제어는 모터블록과 견인전동기의 최소 에너지로 속도를 제어하는 것이 목표이다. 최근의 견인전동기는 직류 및 동기전동기에서 유도전동기를 사용하고 있다. 대부분의 유도전동기는 벡터제어기법을 사용하여 유도전동기의 속도를 제어한다. 본 논문에서는 유도전동기의 벡터제어기법을 이용하여 유도전동기의 속도를 제어하였다. Simulink를 이용하여 제어시스템을 모델링하고, PI 제어기와 Hysteresis 제어기를 이용하여 펄스를 제어하여 전동기의 속도를 제어하였다. 실시간 제어를 위해 IGBT 인버터를 사용하였고, 유도전동기 구동실험에 의해 시스템 성능을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.928-930
• /
• 1992

The design beam energy of PLS(Pohang Accelerator Laboratory) Linac is 2Gev. The linac employs total 11 units of modulators and klystrons. The maximum peak output powers of the modulators are 200MW (400kV, 500A, 4.4$\mu$S flat-top, 800$\Omega$ load) to drive the klystrons which have the peak microwave power of 80MW. Prior to the development of the 200MW modulators, a prototype 150MW modulator has been constructed and tested. We have achieved output pulses of 350kV, 420A and 3.5$\mu$S flat-top with 840$\Omega$ water load. In this article, the test results and computer simulations of charging, De-Q'ing, and discharging are presented.

• 대한의용생체공학회:의공학회지
• /
• 제31권5호
• /
• pp.395-400
• /
• 2010

Hypertension is the chronic disease that the 16% of total population are suffering, and it needs to be studied to find alternative treatment because of the tolerance and side effect of medications that may bother some patients. in this paper, we verified practicality of implantable electrical stimulator that can readily change stimulus magnitude and frequency. And this device is possible to stimulate baroreflex or parasympathetic nerve. Therefore we performed in vitro tests and animal experiment for device's operating conditions. This device consist of implantable electrical stimulator and extracorporeal control/monitoring system. Stimulator was designed to make 1Hz~100Hz pulses and it can change continuous or periodic pulse train type. And this device can control stimulator's function and monitor stimulator's status and patients' blood pressure at exterior of body using ZigBee module as wireless telecommunication. We verified that stimulator have error rate under 5% at 50mm depth of organs and, stimulator makes high-efficiency energy with closer position of two electrodes. Also we can confirm the performance of device that decreasing blood pressure and heart rate of a rat by electrical stimulation.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1992년도 한국우주과학회보 제1권1호
• /
• pp.21-21
• /
• 1992

The X-ray binary pulsar Her X-1 was observed with Ginga on 1988 August 28 during the orbital phase of 0.76 to 0.85 at the main-on phase of the 35 day cycle. During the observations the X-ray intensity varied by a factor of five or more on a time scale as short as 30 sec, due mostly to the soft X-ray absorption in the pre-eclipse phase. From the studies of pulse profiles and energy spectra, we revealed that there exists in the dipphase an unpulsed component which is "3% of the intensity at the non-absorbed high-level. We suggest that scattering of the source continuum by the optically thin hot corona is responsible for the unpoised component. In the spectral analysis, we find that the high-state non-absorbed spectra can be fitted by a power-law without absorption, and the spectra observed in the different abgorption states by two components of a power-law with the same photon index. An iron-K emission line is required in to the cases of fitting. The estimated equivalent width of the iron line varies from 0.18 to 0.51 key according to the change in the absorption column density along the line of sight. We suggest that the fluorescent iron line arises in a cool and relatively small region, like the Alfvensur face, and may be partially intercepted by the optically thick gas cloud passing across the line of sight.1 Korea Astronomy Observatorya The Institute of Space and Astronautical Science in Japan3 Korea Advanced Institute of Science and Technology

• Earthquakes and Structures
• /
• 제14권5호
• /
• pp.399-409
• /
• 2018

The dynamic response and seismic damage of single-layer reticulated shells in the near field of a rupturing fault can be different from those in the far field due to the different characteristics in the ground motions. To investigate the effect, the dynamic response and seismic damage of this spatial structures subjected to two different ground motions were numerically studied by nonlinear dynamic response analysis. Firstly, twelve seismic waves with an apparent velocity pulse, including horizontal and vertical seismic waves, were selected to represent the near-fault ground motion characteristics. In contrast, twelve seismic records recorded at the same site from other or same events where the epicenter was far away from the site were employed as the far-fault ground motions. Secondly, the parametric modeling process of Kiewitt single-layer reticulated domes using the finite-element package ANSYS was described carefully. Thirdly, a nonlinear time-history response analysis was carried out for typical domes subjected to different earthquakes, followed by analyzing the dynamic response and seismic damage of this spatial structures under two different ground motions based on the maximum nodal displacements and Park-Ang index as well as dissipated energy. The results showed that this spatial structures in the near field of a rupturing fault exhibit a larger dynamic response and seismic damage than those obtained from far-fault ground motions. In addition, the results also showed that the frequency overlap between structures and ground motions has a significant influence on the dynamic response of the single-layer reticulated shells, the duration of the ground motions has little effects.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.161-183
• /
• 2017

This paper investigates the damage identification of the concrete pile element through axial wave propagation technique using computational and experimental studies. Now-a-days, concrete pile foundations are often common in all engineering structures and their safety is significant for preventing the failure. Damage detection and estimation in a sub-structure is challenging as the visual picture of the sub-structure and its condition is not well known and the state of the structure or foundation can be inferred only through its static and dynamic response. The concept of wave propagation involves dynamic impedance and whenever a wave encounters a changing impedance (due to loss of stiffness), a reflecting wave is generated with the total strain energy forked as reflected as well as refracted portions. Among many frequency domain methods, the Spectral Finite Element method (SFEM) has been found suitable for analysis of wave propagation in real engineering structures as the formulation is based on dynamic equilibrium under harmonic steady state excitation. The feasibility of the axial wave propagation technique is studied through numerical simulations using Elementary rod theory and higher order Love rod theory under SFEM and ABAQUS dynamic explicit analysis with experimental validation exercise. Towards simulating the damage scenario in a pile element, dis-continuity (impedance mismatch) is induced by varying its cross-sectional area along its length. Both experimental and computational investigations are performed under pulse-echo and pitch-catch configuration methods. Analytical and experimental results are in good agreement.

• 한국분말재료학회지
• /
• 제12권6호
• /
• pp.447-452
• /
• 2005

The synthesis and consolidation of titanium silicide by electro-discharge-sintering has been investigated. As-received Ti powder was in flaky shape and the mean particle size was $45.0{\mu}m$, whereas the mean particle size of the pre-milled Si powder with angular shape was $8.0{\mu}m$. Single pulse of 2.5 to 5.0 kJ/0.34g-elemental Ti and pre-milled Si powder mixture with the composition of $Ti-37.5at.\%$ Si was applied using $300{\mu}F$ capacitor. The solid with $Ti_5Si_3$ phase has been successfully fabricated by the discharge with the input energy more than 2.5kJ in less than $129{\mu}sec.$ Hv values were found to be higher than $1000kgf/mm^2$. The formation of $Ti_5Si_3$ occurred through a fast solid state diffusion reaction.

• 한국광학회지
• /
• 제10권5호
• /
• pp.424-429
• /
• 1999

본 연구는 XeCl 레이저를 펌핑원으로 사용하여 파장 616nm, 펄스폭 106 ps의 분포궤환 색소레이저(DFDL)의 발진과 증폭특성을 측정하였다. 소광장치를 구성하여 얻은 DFDL 단일펄스의 효과적인 증폭을 위해 3단 증폭기를 사용하였다. 증폭기I,II는 전치증폭단으로서 이득길이 5 nm, 10 nm의 색소셀에 농도6$\times$10-4 [mol/ι](용매: Methanol)의 Rhodamine 610을 이득매질로 사용하였다. 증폭기 I은 2%의 ASE 발생과 1 mJ 이상의 펌핑 에너지에서 10배의 포화증폭율을 가지며, 증폭기 II는 2.5 mJ 이상의 펌핑 에너지에서 single-pass 증폭을 통하여 28배의 포화증폭율과 함께 15%의 ASE 발생이 측정되었으며, 최적 증폭을 위해 회절격자를 이용한 ASE 제거와 double-pass 증폭을 수행하여 45배의 에너지 증폭율을 얻었다. 최종증폭단인 증폭기III은 상.하.좌.우의 위치에서 여기되는 Bethune 셀에 농도 3$\times$10-4 [mol/ι](용매:Ethanol)의 Rhodamine 610을 이득매질로 사용하였으며, single-pass 증폭, double-pass 증폭에서 각각 168.2 $\mu$J과 471$\mu$J의 출력에너지를 얻었다.

• 한국항공우주학회지
• /
• 제42권11호
• /
• pp.981-987
• /
• 2014

DC/DC 컨버터는 임의의 직류전원을 부하가 요구하는 형태의 직류전원으로 변환시키는 효율이 높은 전력변환기이다. DC/DC 컨버터는 MOSFET(산화물-반도체 전계 효과 트랜지스터), PWM-IC(펄스폭 변조 집적회로) 제어기, 인덕터, 콘덴서 등으로 구성되어있다. MOSFET는 스위치 기능을 수행하는데 코발트 60 ($^{60}Co$) 저준위 감마발생기를 이용한 TID 실험에서 방사선의 영향으로 문턱전압과 항복전압의 변화와 SEGR 실험에 적용된 5종류의 중이온 입자는 MOSFET의 게이트(gate)에 영향을 주어 게이트가 파괴된다. MOSFET의 TID 실험은 40 Krad 까지 수행하였으며, SEGR 실험은 제어보드를 구현한 후 LET(MeV/mg/$cm^2$)별 cross section($cm^2$)을 연구하는데 있다.

• Journal of Oral Medicine and Pain
• /
• 제22권2호
• /
• pp.309-325
• /
• 1997

In order to set the lasing variables and evaluate, clinically, the therapeutic effects of a pulsed Nd:YAG laser on oral lesion, the author applied the laser energy from a fiberoptic delivered, free running, pulsed Nd:YAG laser (wavelength 1064nm, Pulse duration 120$\mu$sec, fiber diameter 200$\mu$m/320$\mu$m) to 22 cases of oral soft tissue lesions and 6 cases of oral hard tissue lesions. The obtained results were as follows : 1. The effective excision with contact mode and the effective hemostasis of accompanied bleeding with noncontact mode were occurred by lasing on oral soft tissue lesions with fiber diameter of 320$\mu$m under the variables of 2.0~4.0W and 20~50Hz which were controlled into high power/low pulses for excision, low power/high pulses for hemostasis, low power in granulation tissue and high power in fibrous tissue according to therapeutic goals and tissue conditions. 2. About 50% of decreasing effect on hypersensitivity was occurred by lasing with non-contact and contact mode on cervical abrasion which caused dentinal hypersensitivity with fiber diameter of 320$\mu$m under the variables of 0.7 - 1.0W and 10Hz which were applied 2~3 times with 1 week interval. 3. The effective sterilization of infected root canal and lesion of periapical abscess was occurred by lasing with contact and spiral modes on wall of root canal and periapical abscess with fiber diameter of 200$\mu$m of which the tip was placed about 1mm shorter than root canal length under the variables of 1.OW and 10Hz.