• 제목/요약/키워드: Pulse Analysis

검색결과 2,098건 처리시간 0.028초

ORC-OQ2PSK 변조 기반의 근거리 무선통신 시스템에서 기기 간 상호 간섭의 영향 분석 (An Analysis on the Effects of Inter-Device Interference in the ORC-OQ2PSK Based Wireless Personal Area Networks)

  • 전상엽;김명진
    • 전자공학회논문지
    • /
    • 제53권3호
    • /
    • pp.3-10
    • /
    • 2016
  • 동일한 공간에서 다수의 근거리 무선 네트워크(WPAN)가 작동하는 네트워크 환경을 구축하는 경우 기기 간 간섭의 영향을 고려할 필요가 있다. 사용하는 변조 방식에 따라 인접한 주파수 채널의 간섭 신호가 주는 영향이 차이가 있을 수 있다. 스펙트럼의 부엽이 큰 변조 방식을 사용하는 경우 다른 주파수 채널을 사용하더라도 간섭으로서 영향을 미칠 수 있으며, 간섭원의 공간상 거리에 따라 심각한 성능 저하가 발생할 가능성도 있다. 본 논문에서는 ORC-$OQ^2PSK$ 변조 기반의 WPAN에서 인접 주파수 채널을 사용하는 기기로부터의 간섭 영향을 분석하였다. 분석 결과를 기존 GFSK 기반의 WPAN과 비교하여 ORC-$OQ^2PSK$ 변조 기반의 WPAN에 대한 타당성 검증을 수행하였다.

Al 6082-T6 고속 MIG 용접에서 기공방지를 위한 용접공정 개발 (The development of welding process to prevent porosity in high speed MIG Welding of Al 6082-T6)

  • 정연호;박경도;백상엽;오동수;성영기;김정표;조상명
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2009년 추계학술발표대회
    • /
    • pp.8-8
    • /
    • 2009
  • 알루미늄 합금 Al 6082-T6는 최근에 개발되어 북유럽 등의 선진국에서는 그 뛰어난 해양 내식성과 우수한 강도로 인하여 해양구조물의 헬리데크(Helideck), 타워 갱웨이(Tower gangway), 알루미늄 피팅류(Aluminium fitting)등의 해양구조물과 플랫폼(Flatform), 알루미늄 래더(Aluminium ladder)등의 선박부품, 차량, 기계부품 분야에서 전 세계적으로 널리 사용되기 시작하였다. 그러나 전통적으로 용접금속의 기공은 결함으로 분류 되고, Rakesh Kumar 등의 논문에 따르면 용접 시 용접금속 내에 발생되어진 미세기공이 기계적 성질에 악영향을 미치는 것으로 보고되어졌다. 따라서 용접금속내의 발생하는 기공을 방지하는 용접공정의 개발이 반드시 필요하다. 본 연구의 목적은 Al 6082-T6 고속 MIG용접에서 기공방지를 위한 용접공정을 개발하는 것이다. Al 6082-T6의 7t 플레이트에 Al 5356의 와이어를 사용하여 아크길이 변경 및 용접속도를 60cpm과 120cpm으로 변경하여 실험하였고, 용접속도 120cpm의 고속 MIG용접에서 토치 진행각을 변경하여 실험을 진행하였다. 용접공정 파라메터 변경에 따른 기공율 측정은 이미지 분석 소프트웨어를 사용하여 정량적으로 분석하였다.

  • PDF

Host-Guest Interactions Between Macrocycles and Methylsubstituted Anilinium Ions

  • Lee, Shim-Sung;Jung, Jong-Hwa;Chang, Duk-Jin;Lee, Bu-Yong;Kim, Si-Joong
    • Bulletin of the Korean Chemical Society
    • /
    • 제11권6호
    • /
    • pp.521-527
    • /
    • 1990
  • The binding characteristics and analytical applications of anilinium ion complexes with 18-crown-6 were studied by polarography and NMR. First, the electrochemical reduction of the 10 species of mono and dimethylsubstituted anilinium ion complexes with 18-crown-6 as host in methanol are examined. The addition of 18-crown-6 to anilinium guest solution the polarographic waves remain well defined but shifted toward more negative potentials, indicating the complex formation. The values of formation constants, log Κ for 10 species of methylsubstituted anilinium ion complexes with 18-crown-6 varies from 2.7 to 4.8 in methanol at $25^{\circ}C$. The stability order of complexes for 18-crown-6 is anilinilum > 4-methyl > 3,4-dimethyl > 3-methyl > 3,5-dimethyl > 2,4-dimethyl > 2,5-dimethyl > 2,3-dimethyl > 2-methyl > 2,6-dimethylanilinium ion. The steric hindrance shows significant effect. Second, Proton NMR was used to elucidate their interaction characteristics. From the results of so called NMR titration techniques, the behaviors of binding sites on complexation, and the stoichiometry and stability order of complex were obtained. And the later results show the satisfactory agreement with the quantitative values obtained by polarography. Finally, the individual determinations of anilinium ion mixtures were also accomplished by addition of 18-crown-6. In some mixtures of methyl or dimethylanilinium ions the reduction peaks of differential pulse method appeared into one unresolved wave attributed to the small difference of half-wave potential, ${\Delta}E_{1/2}$. In the presence of 18-crown-6, the polarographic waves were resolved into individual maxima because of the shift toward more negative direction by the difference of selectivity of anilinium ions with 18-crown-6. It may be concluded that quantitative analysis of methylanilinium ion mixture make possible because the half-wave potential shift by the selectivity difference due to the steric hindrance between methyl group and 18-crown-6 on complexation.

기후변화에 따른 만경강 어류서식처 영향 분석 (Analysis of effect on physical habitat in the Mankyung River by climate chang)

  • 홍일;전호성;김지성;김규호
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2017년도 학술발표회
    • /
    • pp.521-521
    • /
    • 2017
  • 본 연구는 기후변화가 만경강에 서식하는 어류 서식처에 미치는 영향을 분석하고자 하였다. 기후변화 영향에 따른 수문자료는 RCP 8.5 기후변화시나리오 결과에 기반하여 SLURP 분포형 모델을 이용하여 일 유출량을 도출하였다. 기후변화 전후의 일 유출량 자료는 수문변화지표(indicator of Hydrologic Alteration, IHA) 통계분석모형을 이용하여 유출량의 규모, 빈도, 시기, 기간, 변화율 등 유황특성을 반영한 5가지의 환경흐름요소(Environmental Flow Components, EFC)로 나타냈다. 환경흐름요소는 수문기간 동안의 유황을 극히 낮은 흐름(Extreme low flow), 낮은 흐름(Low flow), 높은 흐름 펄스(High flow pulse), 작은 홍수(Small floods), 커다란 홍수(Large floods) 등 5가지의 스펙트럼 형태로 나타낼 수 있다. 어류의 물리서식처 모의를 위한 대상어종은 환경부 멸종위기 야생동식물 1급으로 지정 및 보호되고 있고 과거 만경강 봉동 일대에서 출현하였던 감돌고기를 선정하였다. 감돌고기의 서식처 적합도(HSI)는 과거 모니터링 결과 및 문헌자료 근거로 생애주기별(산란기, 성장기, 성어기)로 구분하여 나타내었고, River2D 모형에 적용하였다. 분석결과 생애주기별로는 기후변화 영향 후 산란기의 감돌고기의 서식처가중가용면적은 24.1% 증가, 성장기와 성어기의 가중가용면적은 각각 3.3%, 7.3%로 감소하는 것으로 예측되었다. 극한조건에서 서식처가중가용면적의 크기는 높은 흐름 펄스, 작은 홍수, 커다란 홍수, 극히 낮은 흐름 순으로 나타났다. 기후변화 영향으로 인한 가중가용면적의 변화는 작은 홍수를 제외하고 미래에는 감소하는 것으로 나타났으며, 특히 극히 낮은 흐름, 커다란 홍수의 경우 빈도와 기간을 고려할 때 실질적인 가중가용면적은 더욱 악화될 것으로 예측되었다. 이러한 결과를 바탕으로 기후변화 영향으로 인한 만경강 유역의 미래서식처 요건은 악화될 것으로 예상되며 멸종위기종인 감돌고기의 서식처 확보방안의 제시가 필요할 것으로 판단된다.

  • PDF

나선형 난류고리가 아세틸렌-산소 혼합기의 데토네이션파 성능에 미치는 영향 (Effect of Spiral Turbulent Ring on Detonation Performances of Acetylene-Oxygen Mixture)

  • 손민;서찬우;이건웅;구자예
    • 한국추진공학회지
    • /
    • 제17권2호
    • /
    • pp.9-15
    • /
    • 2013
  • Shchelkin 나선으로 알려진 나선형 난류고리가 아세틸렌-산소 혼합기의 데토네이션파의 성능에 미치는 영향을 실험적으로 연구하였다. 고속응답 압력 트랜스듀서로 측정된 압력 피크의 시간차를 이용하여 데토네이션파 속도를 산출하였다. 또한 추력대를 이용해 데토네이션파의 강도를 측정하여 나선형 난류고리가 연소성능에 미치는 영향을 분석하였다. CFD를 이용하여 간접적으로 유량을 산출하고, 최대 충진률을 위한 최소 충진시간을 도출하였다. 아세틸렌-산소 추진제의 당량비 2.4에서 최대속도 및 압력을 나타냈으며, CEA로 계산된 C-J 속도와 유사한 값을 보였다. 짧은 연소기와 짧은 나선형 난류고리를 사용하는 경우에 최대의 데토네이션파 속도를 나타냈지만, 반대로 난류고리를 사용하지 않은 긴 연소기에서 최대 추력성능을 보였다.

Concrete pavement monitoring with PPP-BOTDA distributed strain and crack sensors

  • Bao, Yi;Tang, Fujian;Chen, Yizheng;Meng, Weina;Huang, Ying;Chen, Genda
    • Smart Structures and Systems
    • /
    • 제18권3호
    • /
    • pp.405-423
    • /
    • 2016
  • In this study, the feasibility of using telecommunication single-mode optical fiber (SMF) as a distributed fiber optic strain and crack sensor was evaluated in concrete pavement monitoring. Tensile tests on various sensors indicated that the $SMF-28e^+$ fiber revealed linear elastic behavior to rupture at approximately 26 N load and 2.6% strain. Six full-scale concrete panels were prepared and tested under truck and three-point loads to quantify the performance of sensors with pulse pre-pump Brillouin optical time domain analysis (PPP-BOTDA). The sensors were protected by precast mortar from brutal action during concrete casting. Once air-cured for 2 hours after initial setting, half a mortar cylinder of 12 mm in diameter ensured that the protected sensors remained functional during and after concrete casting. The strains measured from PPP-BOTDA with a sensitivity coefficient of $5.43{\times}10^{-5}GHz/{\mu}{\varepsilon}$ were validated locally by commercial fiber Bragg grating (FBG) sensors. Unlike the point FBG sensors, the distributed PPP-BOTDA sensors can be utilized to effectively locate multiple cracks. Depending on their layout, the distributed sensors can provide one- or two-dimensional strain fields in pavement panels. The width of both micro and major cracks can be linearly related to the peak strain directly measured with the distributed fiber optic sensor.

인덕턴스 변화 모델을 이용한 EMGF 출력 분석 (EMGF Output Analysis Using Inductance Variation Model)

  • 김태신;성인모;양지혁;유천열;권오규
    • 한국자기학회지
    • /
    • 제19권1호
    • /
    • pp.5-11
    • /
    • 2009
  • Explosive Magnetic Generator of Frequency(EMGF)는 고폭화약의 폭발을 이용하여 화약의 폭발 에너지를 전자기 에너지로 변환 시키면서 초고주파의 강한 전자파를 발생시키는 효율적인 방법으로 연구되고 있다. 이 때 발생하는 전자파의 물리적 원인은 현재까지 명확하게 규명되어 있지 않은데, 단순한 시변 등가회로 해석만으로는 이러한 고주파 발진을 설명하기 어려운 것으로 알려져 있다. 이 논문에서는 기존에 널리 받아 들여 지고 있는 지수 감소적인 시변 인덕턴스 변화 모델에 대해서 자장압축효과를 고려한 유한요소 해석을 통해 문제점을 분석하고 보다 정확한 인덕턴스 변화 모델의 경향성에 대해서 제시하고자 한다. 그리고 이렇게 제시된 새로운 인덕턴스 변화 모델을 사용한 EMGF 출력 시뮬레이션을 통해 새로운 인덕턴스 변화 모델이 출력에 미치는 영향을 분석한다.

Cerebral Oxygenation during Apnea in Preterm Infants: Effects of Accompanying Peripheral Oxygen Desaturation

  • Choi, Seo Hee;Lee, Juyoung;Nam, Soo Kyung;Jun, Yong Hoon
    • Neonatal Medicine
    • /
    • 제28권1호
    • /
    • pp.14-21
    • /
    • 2021
  • Purpose: Premature infants have immature respiratory control and cerebral autoregulation. We aimed to investigate changes in cerebral oxygenation during apnea with and without peripheral oxygen desaturation in premature infants. Methods: This prospective observational study was conducted at Inha University Hospital. Near-infrared spectroscopy (NIRS)-monitored regional cerebral oxygen saturation (rScO2) and pulse oximeter-monitored peripheral oxygen saturation (SpO2) were assessed during the first week of life in 16 stable, spontaneously breathing preterm infants. Apneic episodes that lasted for ≥20 seconds or were accompanied by desaturation or bradycardia were included for analysis. The average rScO2 value during the 5-minute prior to apnea (baseline), the lowest rScO2 value following apnea (nadir), the time to recover to baseline (recovery time), the area under the curve (AUC), and the overshoot above the baseline after recovery were analyzed. Results: The median gestational age and birth weight of the infants were 29.2 weeks (interquartile range [IQR], 28.5 to 30.5) and 1,130 g (IQR, 985 to 1,245), respectively. A total of 73 apneic episodes were recorded at a median postnatal age of 2 days (IQR, 1 to 4). The rScO2 decreased significantly following apneic episodes regardless accompanied desaturation. There were no differences in baseline, nadir, or overshoot rScO2 between the two groups. However, the rScO2 AUC for apnea with desaturation was significantly higher than that for apnea without desaturation. Conclusion: Cerebral oxygenation can significantly decrease during apnea, especially when accompanied by reduced SpO2. These results add the evidence for the clinical utility of NIRS in monitoring premature infants.

국내 개발 인공위성을 위한 저비용 원격명령 처리 시스템 구현 및 분석 (Development and Analysis of Low Cost Telecommand Processing System for Domestic Development Satellites)

  • 박상섭;이성진;전용기
    • 한국항공우주학회지
    • /
    • 제49권6호
    • /
    • pp.481-488
    • /
    • 2021
  • 인공위성의 원격명령 처리시스템은 상태감시, 제어 및 미션 실행을 위한 원격명령을 제공하는 유일한 통로이다. 국내의 인공위성은 과학 및 기술 위성, 다목적 위성 및 정지궤도 위성으로 나눌 수 있으며 CCSDS 표준 프로토콜을 사용하여 지상국과 통신을 수행한다. 그러나 기존의 국내개발 위성은 소프트웨어를 사용하여 원격명령어를 디코딩하여 소프트웨어 개발 및 검증 비용이 높고 하드웨어와 비교할 때 상대적으로 성능이 낮다. 본 연구에서는 원격명령 디코딩 ASIC을 이용한 원격 명령 처리시스템을 제시한다. 이 시스템의 하드웨어는 telecommand RAM, protocol RAM/ROM, telecommand ASIC, interface FPGA 및 relay block으로 구성되었다. 이 시스템은 인공위성이 사용하는 일반 명령 및 펄스 명령을 처리한다. 시스템을 시험 및 검증하기 위해 점검 장비 및 시험환경을 구축하였다. 제안한 ASIC 기반의 telecommand 처리시스템은 소프트웨어 기반 디코딩 시스템에 비해 개발 비용을 1/5로 줄였을 뿐만 아니라 성능은 105배 향상되었다.

방전가공기의 효율적인 아크 검출과 제어방법 (Efficient Arc Detection and Control Method in Electro-discharge Machining)

  • 박양재
    • 디지털융복합연구
    • /
    • 제16권12호
    • /
    • pp.309-315
    • /
    • 2018
  • 방전 현상을 에너지로 이용하여 금속을 가공하는, 특히 초경 및 난삭 소재의 가공과 정밀가공에 효과적인 방전가공 시 빠른 가공속도와 향상된 정밀도 및 면조도를 달성하기 위하여 효율적인 아크의 검출과 제어방법에 대해 연구하였다. 단일 방전 파형을 Td(Time-Delay), Ton(Time-on), Toff(Time-off)의 세 가지 구간으로 나누어 HDL 언어를 이용하여 게이트 제어 타이밍을 시뮬레이션 하고, 실제 방전가공기에 적용하여 파형을 실측하였으며, 비교기 회로를 통한 Td 구간의 샘플링을 통해 서보기구의 동작을 결정함으로써 전극과 가공물 간의 간격 제어와 가공 결과에 미치는 영향을 분석하였다. 분석결과 형성되는 파형의 Td 구간을 보다 정밀하게 고속으로 샘플링하여 이를 토대로 전극과 가공물 간의 gap 제어에 적용하였을 때 보다 향상된 결과를 나타내었다.