• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.192-203
• /
• 2007

This study histologically assessed the effect of topical alendronate application on periodontal healing in replanted teeth in fifty four SD Rats. Upper first molars in rat were extracted and replanted after dried during 15 minutes or 60 minutes in the air. In Group I, all teeth were replanted after 15 minutes of dry storage without any other treatment. In Group II and III, the pulps were removed and all teeth were replanted after soaking 10 min in Hank's balanced salt solution with/without alendronate, followed by 60 minutes of dry storage. the rats were sacrificed after 7, 15 and 30 days. The histological parameters studied were healed PDL, surface inflammatory and replacement resorption, and inflammatory severity. The following conclusions could be drawn from the present investigation. 1. Group I showed lower inflammatory root resorption and inflammation severity rate, compared to Group II and Group III. In Group I there showed effective for reattachment and regeneration of PDL. 2. In Group II, inflammatory root resorption were more severe and faster than other groups. There were extensive root resorption in the rats sacrificed after 30 days. 3 In Group III, there were localized inflammatory resorption in several areas, but extensive resorption did not occur Group III showed increase in root resorption rate, compared to Group I. However this difference was not statistically significant. 4. There were no difference between sacrificed days in replacement root resorption in all groups.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.685-692
• /
• 2013

Yuza (Citrus junos) has 3 varieties with variable physiochemical properties. This study analyzed these volatile compounds and physiochemical properties according to variety. Three Yuza varieties, native (Citrus junos I), improved I (Citrus junos I+Poncirus trifoliata), improved II (Citrus junos I+C. junos II) were used. The native Yuza weighted more than the improved varieties, but the peel ratio (weight of peel versus pulp) was high in improved one. Protein and ash contents were high in Improved I than native one. Native had 29.6mg% vit. C in pulp and improved I had 57.7mg% vit. C in peel. Free sugar was mainly fructose, and the main organic acid was citric acid in Yuza. Improved I Yuza had high free sugar contents, and the organic acid levels were high in improved II Yuza. Linoleic acid was the most prevalent fatty acid in Yuza; it was distributed in peel or pulp. The most common volatile flavor component was dl-limonene (64~70%); improved II Yuza showed significantly higher contents of dl-limonen and ${\gamma}$-terpinen. Total phenol level of Yuza was identical in all types, but peels had 2.5 times more than pulps.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.571-588
• /
• 2016

Eucalyptus pellita F. Muell is one of pulp woods that is being developed through breeding plantation programs in Indonesia. The research aimed at exploring the chemical and morphological characteristics of fiber, and to determine the rank of plus trees from 4 provenances based on the suitability for pulps. The materials included the plus trees of E. pellita (9 years) from the 2nd generation of progeny tests in Pelaihari, South Borneo. Wood properties under investigation included the chemical properties and morphological fiber characteristics (fiber dimensions and its derived properties). In the present study, data were analyzed using descriptive statistic, Analytic Hierarchy Process (AHP) and Pearson's correlation. Results showed that the chemical properties of E. pellita, i.e. the contents of ethanol-toluene extractives, hot water soluble extractives, holocellulose, alphacelullose, and lignin were $3.08{\pm}1.00%$, $1.41{\pm}0.38%$, $75.26{\pm}2.58%$, $49.02{\pm}2.88%$, and $29.49{\pm}1.86%$, respectively. The average values of wood fiber morphology were $1.02{\pm}0.08$ mm (fiber length), $13.25{\pm}1.64{\mu}m$ (fiber diameter), of $6.94{\pm}1.70{\mu}m$ (lumen diameter), $3.15{\pm}0.52{\mu}m$ (fiber wall thickness), $0.97{\pm}0.30$ (Runkel ratio), $0.57{\pm}0.10$ (Luce's shape factor), $78.21{\pm}10.34$ (slenderness ratio) and $130.91{\pm}33.77{\times}10^3{\mu}m^3$ (solids factor). The AHP scoring rank indicated that the best individuals were 28.4.3.28 (Kiriwo Utara), 12.1.5.28 (North Kiriwo), 19.11.5.45 (Serisa Village), 3.8.4.9 (South Kiriwo), and 6.6.3.15 (South Kiriwo). Pearson correlation analysis showed significant correlations between the levels of fiber length with alpha-cellulose content (r = 0.39) as well as the fiber length with ethanol-toluene extractive contents (r = -0.41).

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.367-373
• /
• 1999

Increasing consumer demand for recycle of most paper products is challenging manufacturers to use lower value raw materials while maintaining high quality. This study was carried out to investigate the composition of old corrugated containers (OCC) and to manufacture printing and writing papers of over 85% (ISO) brightness by ECF and TCF bleaching from OCC. Fiber length of American old corrugated container (AOCC) was longer than that of Korean old corrugated container (KOCC) in fiber length. The former was composed of unbleached kraft pulp (UKP) of about 80 percentage, the latter about 20 percentage. OCC is feasible for manufacturing of pulps i.e., AOCC is for printing and writing papers and KOCC is for whiteboards, in the aspects of brightness and mechanical properties on the other hand, the cost of manufacturing upgraded papers by OCC is high because of bleaching chemicals. Neverthless, considering various aspects, especially environment, there are many advantages in recycling. In case of the treated AOCC pulp, over 85% (ISO) brightness can be achieved through TCF or ECF bleaching step, while the treated KOCC pulp did not allow high brightness through TCF bleaching. The tensile index of the bleached KOCC pulp was lower than that of the bleached AOCC pulp, but the burst and tear index of KOCC was higher than that of AOCC.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.36-42
• /
• 1997

The fiber wall filling(FWF) technology, which is based on Precipitatin of fillers in the micropores of the cell wall structure of never-dried chemical pulp fiber, has been developed to improve filling and loading process in papermaking. In presenting FWF technique here, micropores of pulp fiber are first impregnated with an ionic solution of water soluble salt and consecutively impregnated with the second salt solution. This procedure generates an insoluble precipitate within the micropores of cell wall by chemical interaction of these two ionic salt solutions This is the first attempts to use FWF technology for the quality of waste paper grade which is recycled in papermaking, even though this FWF technology has been impressively improved for never-dried chemical pulp in filling and loading process of papermaking. The precipitated amount of CaCO$_3$ and SrCO$_3$ reached 5-6% and 4-5% of the waste paper weight respectively, which was measured by ash content of the burned waste paper fiber. On the other way the precipitated amounts of those materials impregnated into never-dried chemical pulp fiber have reached 17-18% and 16-18% respectively. The micropore loading technique gives optical and physical properties to the handsheets formed with celt-wall-filled fibers which are better than those handsheet properties resulting from conventional loading. The papers made from the cell-wall-filled pulps are stronger than those with the customary location of filler between the fibers.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.193-203
• /
• 2005

The induction of the IL-8 and MCP-1 by the stimulation of Substance P and TNF-${\alpha}$ (IL-8 agonist) and the specificity for SP using Spantide (SP antagonist) in the dental pulp tissues was measured quantitatively. In addition, the secretion of the IL-8 in the human dental pulp tissue 36 hrs after the stimulation of SP was observed after the stimulation of SP qualitatively. According to this study the results were as follows: 1. There was the significant IL-8 induction at 36 h after SP (10$^{-4}$M) stimulation of the pulp tissue comparing with the unstimulated dental pulp tissues (p < 0.05) . IL-8 irnmunostaining was weakly detected along the periphery of the pulp tissue after Mock stimulation and IL-8 immunostaining was detected around the fibroblast in the pulp tissue 36h After SP (10$^{-4}$M) stimulation, 2. The secretion of MCP-1 from the dental pulp tissues comparing with Mock stimulation was induced at 36 hrs after TNF-$\alpha$ (40 ng/ml) stimulation, but no induction with SP(10$^{-4}$M) TNF-${\alpha}$ (40 ng/ml) did not induce the IL-8 secretion from the pulp tissue, weak IL-8 imrnunostaining was detected along the periphery of the pulp tissue 3. Spantide (10$^{-5}$M) inhibited IL-8 induction from the pulp tissues 36 h after SP (10$^{-4}$M) stimulation These results suggest that SP significantly induces IL-8 recruiting neutrophils in localized human dental pulp tissue MCP-1 appears to be less involved in the early establishment of pulpal inflammation in response to irritation such as mechanical insult of dentin. SP may have positive relation with the inflammation of the human dental pulp tissues.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.43-50
• /
• 2012

The concept of revascularization of necrotic pulps regained interest and became an alternative conservative treatment option for young permanent teeth with immature roots. Revascularization of immature teeth with apical periodontitis depends mainly on disinfection of the canal. Since the infection of the root canal system is considered to be polymicrobial, a combination of drugs would be needed to treat the diverse flora. A triple antibiotic mixture of metronidazole, ciprofloxacin, and minocycline was used as an intracanal medicament. However, discoloration was developed after applying the triple antibiotic mixture. It is believed that the marked discoloration is related to the use of minocycline. The aim of this article was to present cases of coronal discoloration after triple antibiotic therapy in immature tooth and was treated with bleaching technique to control coronal discoloration. In conclusion, revascularization by using triple antibiotics promotes a paradigm shift in treating endodontically involved permanent teeth. However, we should understand that triple antibiotics containing minocycline induces tooth discoloration. Further research to prevent coronal discoloration should be investigated and suggested for the safe use of triple antibiotics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.700-708
• /
• 2001

Traumatic injuries in young patients can result in the interruption of the development of the incompletely formed roots. In teeth with incomplete root-end formation and necrotic pulps, the root canals must be completely debrided. Because of a lack of an apical stop and the presence of thin and fragile walls in these teeth, it is imperative to perform apexification to obtain an adequate apical seal. Calcium hydroxide has become the material of choice for apexification. Despite its popularity for the apexification procedure, calcium hydroxide therapy has some inherent disadvantages that include variablility of treatment time, unpredictability of apical closure, difficulty in patient follow-up, and delayed treatment. An alternative treatment to long-term apexification procedure is the use of an artificial apical barrier that allows immediate obturation of the canal. MTA(Mineral Trioxide Aggregate) is a powder consisting of fine hydrophilic particles of tricalcium silicate, tricalcium aluminate, tricalcium oxide and silicate oxide. MTA has a pH of 12.5 after setting, similar to calcium hydroxide. This may impart some antimicrobial properties. MTA has low solubility and a radiopacity slightly eater than that of dentin. Also, MTA leaked significantly less than other materials and induced hard-tissue formation more than other materials.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1636-1643
• /
• 2012

Enzymatic pre-bleaching by modification of pulp fibers with xylanases is an attractive approach to reduce the consumption of toxic bleaching chemicals in the paper industry. In this study, an alkaliphilic endoxylanase gene was isolated from metagenomic DNA of a structurally stable thermophilic lignocellulose-degrading microbial consortium using amplification with conserved glycosyl hydrolase family 10 primers and subsequent genome walking. The full-length xylanase showed 78% sequence identity to an endo-${\beta}$-1,4-xylanase of Clostridium phytofermentans and was expressed in a mature form with an N-terminal His6 tag fusion in Escherichia coli. The recombinant xylanase Xyn3F was thermotolerant and alkaliphilic, working optimally at $65-70^{\circ}C$ with an optimal pH at 9-10 and retaining >80% activity at pH 9, $60^{\circ}C$ for 1 h. Xyn3F showed a $V_{max}$ of 2,327 IU/mg and $K_m$ of 3.5 mg/ml on birchwood xylan. Pre-bleaching of industrial eucalyptus pulp with no prior pH adjustment (pH 9) using Xyn3F at 50 IU/g dried pulp led to 4.5-5.1% increase in final pulp brightness and 90.4-102.4% increase in whiteness after a single-step hypochlorite bleaching over the untreated pulp, which allowed at least 20% decrease in hypochlorite consumption to achieve the same final bleaching indices. The alkaliphilic xylanase is promising for application in an environmentally friendly bleaching step of kraft and soda pulps with no requirement for pH adjustment, leading to improved economic feasibility of the process.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.120-129
• /
• 2009

The purpose of this study was to investigate the pulpal response to direct pulp capping with dentin sialoprotein (DSP) -derived synthetic peptide in teeth of dogs, and to compare its efficacy to capping substances $Ca(OH)_2$ and white mineral trioxide aggregate (WMTA). A total of 72 teeth of 6 healthy male beagle dogs were used. The mechanically exposed pulps were capped with one of the following: (1) DSP-derived synthetic peptide (PEP group): (2) $Ca(OH)_2$ (CH group): (3) a mixture paste of peptide and $Ca(OH)_2$ (PEP+CH group): or (4) white MTA (WMTA group). The access cavity was restored with a reinforced glass ionomer cement. Two dogs were sacrificed at each pre-determined intervals (2 weeks, 1 month, and 3 months). After the specimens were prepared for standard histological processing, sections were stained with hematoxylin and eosin. Under a light microscope, inflammatory response and hard tissue formation were evaluated in a blind manner by 2 observers. In the PEP group, only 3 of 17 specimens showed hard tissue formation, indication that the DSP-derived synthetic peptide did not induce proper healing of the pulp. Compared with the CH group, the PEP group demonstrated an increased inflammatory response and poor hard tissue formation. The CH and WMTA groups showed similar results for direct pulp capping in mechanically exposed teeth of dogs.