• Journal of the Korean Wood Science and Technology
• /
• 제18권1호
• /
• pp.3-9
• /
• 1990

Expression is on operation of separating liquid from solid liquid mixtures which has long been used on a universal scale in widely divergent fields. In fruit pulps processing and fermentation industries. removal of a portion of the liquid in filler cake is essential to the maximum yields of products. In sewage sludge treatments, dewatering of filter cakes is important to disposal by incineration. transportation. and landfill. In the chemical process industries, drying of wet cakes increases cost, and it is desirable to eliminate as much liquor as possible by non-thermal methods. This paper is mainly concerned with the development of a simplified equation for constant-pressure expression.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.8-17
• /
• 2005

WCT (Wet compaction test) is a new fiber evaluation method developed recently by Seo and its test results can be used as a predictor for pulp quality and its paper property Bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) were used for the furnishes to be tested by WCT We compared the WCT results to conventional fiber evaluation tests such as WRV (Water Retention Value), free ness, and fiber length in this study, and found that WCT always gave better regression coefficients in relation to pulp quality (drainage), and paper properties (density, tensile, tear, and burst strength). WCT may be used on-line in papermachine.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.26-31
• /
• 2005

The purpose of this study was to confirm paper strengthening properties with recently commercialized polyvinylamine. Because of its high cationic charge density, polyvinylamine has been investigated as a size retention and surface coating aids. In this study, we tried to confirm polyvinylamine as wet-end additives to improve dry and wet strength using LBKP and BCTMP pulps. As a result, we found improvement of dry and wet tensile properties of polyvinylamine with BCTMP were much better than LBKP condition. This phenomena could be explained that ionic bonding of cationic charge of polyvinylamine with abundant anionic substances of BCTMP was a very important factor to improve dry and wet strength of paper.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.232-238
• /
• 1999

The reinforcement of wheat straw pulp sheets with softwood kraft was studied, with special emphasis on the impact of softwood kraft beating and the proportion softwood kraft in straw pulp. the reinforcement was evaluated by measuring the tensile stiffness sand in-plane fracture behavior of samples. the results were compared with a mechanical pulp (TMP) and with a hardwood birch kraft, both reinforced with the same softwood kraft. Wheat straw pulp forms strong interfiber bonds. Therefore, its tensile stiffness and tensile strength are larger than TMP used. In-plane tear tests showed that a pure wheat straw pulp sheet has low fracture energy and correspondingly a narrow fracture process zone. The fracture energy of the reinforced straw sheets was found to increase linearly with the proportion of both unbeaten and beaten softwood pulps.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.582.1-582
• /
• 2001

IL-6 and IL-10 are known to be inflammatory cytokines that mediate host response to invading microorganisms or pathogenic antigen. But the roles of these cytokines in pulpal inflammation are not well established. The objective of this study was to investigate the concentrations and the roles of IL-6 and IL-10 in the pulpal inflammation associated with gram-negative bacteria, P. nigrescens. We exposed the pulps of rat mandibular incisors and inserted sterile cotton in control groups and inoculated P. nigrescens in experimental groups.(omitted)

• 보존과학회지
• /
• 제5권1호
• /
• pp.11-19
• /
• 1996

This research carried out on characteristics of degradation for the handmade Japanese paper(Washi) and handmade Korean paper(Hanji), which are not studied clearly at present, made an experiment on the physical and the optical tests to the temperature and humidity, The results are as follows ;The handmade Korean paper showed worse results of physical and optical tests than those of Washi. Above all, that low durability was the most characteristics. The handmade paper demands preservation, and therefore, the fiber selection of compositive materials is important. For the handmade Korean paper showed this time, put waste pulps off, and adjust the mixing maintaining appropriate basis weight, and then it must be improved durability.

• 한국연초학회지
• /
• 제11권2호
• /
• pp.211-224
• /
• 1989

10. Three major factors, freeness, filler and blend ratio that exercised considerable influence on physical properties of cigarette papers were chosen for the sake of their optimization at this experiment. An optimization of those above factors in paper manufacturing was investigated using response surface analysis. Optimum beating degree for Kenaf, Flax and NBKP showed around 72。SR, 68。SR and 85 SR, respectively, in considering of five quality index such as porosity, tensile strength, stretch, whiteness and opacity. The best blending ration of reciprocal pulps treated under optimum beating degree were diversified and combination scope of the bast fiber (Kenaf, Flax) to the NBKP was range from 30% to 65% in case of the Kenaf, from 25 to 40% in Flax at the same receipe. The optimum range of calcium carbonate content revealed 25%~30% in Kenaf mixed NBKP and 24%~31% in Flax mixed NBKP.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.38-45
• /
• 2002

The effect of sequential oxidative-reductive bleaching on brightening of the MOWs is investigated. The improvement in brightnesses of MOWs is more effective in conventional PFAS bleaching than in P/T bleaching. There is no difference in the mechanical properties or the bleached pulps between PFAS and P/T sequences. Considering the brightness gains and bleaching chemicals cost, for the MOW A(Initial brightness: 68.3% ISO) containing 5％ ONP and 20% colored paper, the P/T bleaching is more economical than the PFAS bleaching. However for MOW B(initial brightness: 59.1％ ISO) containing 15% ONP and 35％ colored paper, there is no difference in the bleaching efficiency between PFAS and P/T bleaching.