• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.465-469
• /
• 2006

Pre-treatment methods to determine various heavy metal contents in packaging papers were investigated by ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods utilized in this study include dry ashing and decomposition methods ($HNO_{3-}HClO_{4-}HF,\;HNO_{3},\;and\;H_{2}SO_{4-}HNO_{3}$). They were compared with the conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrument. In case of Cr and Pb, the migration test is considered to be a better method compared to the extraction test, but all pretreated methods showed much higher detection efficiency than the extraction or migration test. However, the detection ratio between the migration test and decomposition methods was different. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method. Concerning Pb, the sulfuric acid - nitric acid method showed a low detection efficiency compared to other decomposition methods. The sulfuric acid - nitric acid method is, thus, not considered to be a suitable analysis method for Pb in packaging papers.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.470-476
• /
• 2005

The purpose of this Study was to invest)gate the function or calcitonin gene-related peptide (CGRP) in regulatory mechanism of pulpal microcirculation with the aim of elucidating neurogenic inflammation. Experiments were performed on twelve cats under general anesthesia. CGRP was administered through the femoral vein to see the systemic Influence and through the external carotid artery to see the local effect. Sympathetic nerve to the dental pulp was stimulated electrically and pulpal blood flow (PBF) was measured with a laser Doppler flowmeter on the canine teeth to the drug administration. The paired variables of control and experimental data were compared by paired t-test and differences with p < 0.05 were considered statistically significant. Systemic administration of CGRP $(0.3{\mu}g/ka)$ exerted decreases in systemic blood pressure and caused changes in PBF with an initial increase i311owed by decrease and a move marked second increase and decrease. Close intra-arterial (i.a.) injection of CCRP $(0.03{\mu}g/kg)$ resulted in slight PBF increase. The effect of CGRP resulted in no significant increase in PBF in the presence of $CGRP_{8-37}$. The electrical stimulation of the sympathetic nerve alone resulted in PBF decreases. The j.a. administration of CGRP following the electrical stimulation of the sympathetic nerve compensated the decreased PBF. Therefore, CGRP effectively blocked the sympathetic nerve stimulation-induced PBF decrease. Results of the present study have provided evidences that even though the local vasodilatory function of CGRP are weak, CCRP is effectively involved in blocking the vasoconstriction caused by sympathetic nerve stimulation in the feline dental pulp.

• 대한치주과학회:학술대회논문집
• /
• 2001.12a
• /
• pp.96-96
• /
• 2001

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.616-622
• /
• 1999

The primary objective of pulp treatment is to maintain the integrity and health of the oral tissues. The most important and difficult aspect of pulp therapy is determining the health of the pulp, or its stage of inflammation, so that a decision can be made regarding the best form of treatment. Immature permanent teeth are good candidates for many pulp healing procedures, due to their rich blood supply, which is believed to enhance the pulp's ability to react successfully to various insults. Healing was considered to have taken place when the tooth fulfilled the following criteria: 1. Abscence of clinical symtoms 2. Radiographic evidence of dentin bridge formation 3. No intrapulpal or periapical pathosis was evident radiographically 4. Continued root development and closure of the apex in immature teeth 5. Normal dentin apposition in mature teeth 6. Positive response to electrical pulp test This presents a report of cases in which immature permanent teeth, pulp-exposed by caries or trauma, was treated successfully by partial pulpotomy.

• Restorative Dentistry and Endodontics
• /
• v.38 no.4
• /
• pp.210-214
• /
• 2013

Objectives: This study aimed to evaluate the capacity of 2% chlorhexidine gel associated with 8% papain gel in comparison with 5.25% sodium hypochlorite in bovine pulp tissue dissolution. Materials and Methods: Ninety bovine pulps of standardized sizes were used and fragmented into 5-mm sizes. The fragments were removed from the root middle third region. They were divided into 6 experimental groups (n = 15), 1) 8% papain; 2) 2% chlorhexidine; 3) 2% chlorhexidine associated with 8% papain; 4) 0.9% saline solution; 5) 2.5% sodium hypochlorite; and 6) 5.25% sodium hypochlorite. The pulp fragments were weighed and put into immobile test tubes for dissolution for time intervals of 30, 60, 90, and 120 min. Results: The 5.25% sodium hypochlorite had greater dissolution potential than the pure papain, and when associated with chlorhexidine, both promoted greater dissolution than did the saline solution and 2% chlorhexidine groups (p < 0.05). The 2.5% sodium hypochlorite promoted dissolution to a lesser extent than the groups with papain within a period of 30 min (p < 0.05), but, was comparable to the saline solution and chlorhexidine. After 120 min, the 2.5% and 5.25% sodium hypochlorite promoted dissolution of 100% of the pulp fragments, and papain, 61%, while chlorhexidine associated with papain and chlorhexidine alone dissolved only 55% and 3%, respectively. Conclusions: The 8% papain in gel, both alone and in association with chlorhexidine, was able to dissolve bovine pulp tissue, but to a lesser extent than did 5.25% sodium hypochlorite.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.3
• /
• pp.34-42
• /
• 1997

This study was carried out to investigate the proper cooking conditions of soda-anthraquinone and alkaline sulfite-anthraquinone pulping of rice-straw, and get basic data f9r the use of rice-straw chemical pulp through the test of characteristics and physical properties of pulps made in the various cooking conditions From the experimental results , we can conclude as follows. In the soda-anthraquinone pulping of rice-straw, the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of caustic soda of 20% with the addition of anthraquinone(0.05%). And total yield, Kappa No. and brightness of pulp made in the condition above mentioned were 41.9%, 7.7 and 51.1 respectively. In the alkaline sulfite-anthraquinone pulping of rice-straw, the proper mixing ratio of cooking chemical(caustic soda : sodium sulfite) was 50:50. And the optimum cooking conditions were 60 min. at $150^{\circ}C$ in the amount of cooking chemical of 20% with the addition of anthraquinone(0.05%). At that time, the total yield, Kappa No, and brightness of pulp were 50.1%, 9.1 and 40.2 respectively. As a result, the alkaline sulfite-anthraquinone pulping was superior to the soda-anthraquinone pulping in the aspect of yield, but inferior in the viewpoints of Kappa No. and brightness. For the comparison of qualities of pulps made in the various cooking methods and conditions, the physical properties of four sorts of pulps were tested. As a result, soda-anthraquinone pulps were superior to alkaline sulfite-anthraquinone pulps in the various strengths excluding tear strength and brightness. On the other hand, pulps made in the condition of addition of cooking chemical of 20% were superior to pulps in the dosage of 15% in the aspects of all the strengths and brightness.

• Restorative Dentistry and Endodontics
• /
• v.48 no.2
• /
• pp.12.1-12.11
• /
• 2023

Objectives: The present study evaluated the pulp response of human mandibular incisors subjected to in-office dental bleaching using gels with medium or high concentrations of hydrogen peroxide (HP). Materials and Methods: The following groups were compared: 35% HP (HP35; n = 5) or 20% HP (HP20; n = 4). In the control group (CONT; n = 2), no dental bleaching was performed. The color change (CC) was registered at baseline and after 2 days using the Vita Classical shade guide. Tooth sensitivity (TS) was also recorded for 2 days post-bleaching. The teeth were extracted 2 days after the clinical procedure and subjected to histological analysis. The CC and overall scores for histological evaluation were evaluated by the Kruskal-Wallis and Mann-Whitney tests. The percentage of patients with TS was evaluated by the Fisher exact test (α = 0.05). Results: The CC and TS of the HP35 group were significantly higher than those of the CONT group (p < 0.05) and the HP20 group showed an intermediate response, without significant differences from either the HP35 or CONT group (p > 0.05). In both experimental groups, the coronal pulp tissue exhibited partial necrosis associated with tertiary dentin deposition. Overall, the subjacent pulp tissue exhibited a mild inflammatory response. Conclusions: In-office bleaching therapies using bleaching gels with 20% or 35% HP caused similar pulp damage to the mandibular incisors, characterized by partial necrosis, tertiary dentin deposition, and mild inflammation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.46-53
• /
• 2012

The purpose of this study was to investigate the functional properties of Changhoji with natural dyeing. This research would provide a basic information for interior material Changhoji. To estimate functional properties of super eight colors Changhoji, water staining, lightfastness, and floodlight color test were executed. In term of the water staining test, blue color showed the clear and other colors showed the little spot. As a result of measuring the lightfastness, Magenta color dyed with sappanwood showed the worst. But blue color dyed with indigo and Turquoise color dyed with indigo and Pagoda tree flower showed the highest. As a result of floodlight color test was no difference between sample color and floodlight color.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.66-71
• /
• 2006

The objective of this study was to find in what color Hanji(Korean hand-made paper) is dyed when it is dyed with a pigment extracted from clove tree using different kinds of mordant, and how the paper is discolored and variety of strength under the condition of accelerated aging test. The results of this experiment are as follows. The Hanji dyed with aluminum acetate mordant was colored yellowish brown at pH 4.82, discoloration after aging was as much as a slight difference of color was recognized, and the decrease of strength after aging test was small. Thus, the method using aluminum acetate mordant was usable in coloring Hanji. The second most useful Hanji dyeing moth of was using distilled water and ferrous sulfate mordant, which dyed Hanji light brown at pH 6.03. However, when pigment was extracted using distilled water and copper sulfate mordant was used, discoloration was satisfactory but strength decreased too much and pale brown was obtained. Thus, this method was not usable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.04a
• /
• pp.80-92
• /
• 2003

The water retention of coating colors can be accurately measured by devices such as an AA-GWR water retention meter whose principle of measurement is based on pressure filtration of coatings under an externally applied air pressure over a certain period of time. It was hypothesized that such devices could be also used to determine the immobilization solids(IMS) of coating colors by determining a sudden drop in the rate of dewatering, that is, a sudden change in the drainage curves. To test this hypothesis, the immobilization solids of coating colors containing various thickeners and water retention additives at different levels were first accurately measured by a modified immobilization tester based on the well-known gloss drop method, and then their values were compared with those obtained by an AA-GWR water retention tester. They agreed very well and showed that the mean of the solids differences is 0.36% in the IMS points between both methods. This good agreement was not surprising because both test methods are based on the same end-point, that is, the immobilization solids point at which menisci begin to form at the coating surface. Theoretical considerations supporting this new method for measuring the immobilization solids of coating colors are presented and some recommendations for the test method are discussed. Also, the effect of various thickeners and water retention additives on the properties and printability of coated papers is discussed.