• 자원리싸이클링
• /
• 제27권1호
• /
• pp.22-30
• /
• 2018

폐니켈수소전지에 함유되어 있는 유가금속인 니켈, 코발트 그리고 희토류의 산업적 재활용을 위하여 자동차용 폐전지모듈로부터 분해, 분쇄 및 분급을 통하여 전극 분말을 회수하였다. 회수된 전극 분말 스크랩을 황산용액으로 침출한 결과 황산농도 1.0 M, 고액비 25 g/L, 반응 온도 $90^{\circ}C$, 4시간 동안의 반응조건에서 니켈, 코발트 그리고 희토류는 약 99%의 침출결과를 얻었으며, 침출액으로부터 희토류는 10 M NaOH를 이용하여 pH 2.0 이하에서 희토류 침전물과 니켈/코발트 용액 분리가 가능하였다.

• 한국분말재료학회지
• /
• 제21권3호
• /
• pp.202-206
• /
• 2014

Leaching of MOCVD dust in the LED industry is an essential stage for hydro-metallurgical recovery of pure Ga and In. To recover Ga and In, the leaching behavior of MOCVD scrap of an LED, which contains significant amounts of Ga, In, Al and Fe in various phases, has been investigated. The leaching process must be performed effectively to maximize recovery of Ga and In metals using the most efficient lixiviant. Crystalline structure and metallic composition of the raw MOCVD dust were analyzed prior to digestion. Subsequently, various mineral acids were tested to comprehensively study and optimize the leaching parameters such as acidity, pulp density, temperature and time. The most effective leaching of Ga and In was observed for a boiling 4 M HCl solution vigorously stirred at 400 rpm. Phase transformation of GaN into gallium oxide by heat treatment also improved the leaching efficiency of Ga. Subsequently high purity Ga and In can be recovered by series of hydro processes.

• 한국식품저장유통학회지
• /
• 제14권4호
• /
• pp.351-355
• /
• 2007

감귤 부위별 및 감귤 주스 가공 후 폐기되는 착즙박을 배지로 하여 재배된 간, 표고, 새송이, 산호침, 참부채 및 영지 버섯) 균사체의 GC/MS에 의한 휘발성 물질을 분석하였다. 감귤 분말에서 휘발성 물질은 29종류이었는데, ${\delta}-elemene$, ${\beta}-elemene$, ${\beta}-caryophyllene$, caryophyllene, ${\gamma}-elemene$, germacrene-D 및 ${\delta}-cadinene$은 감귤류의 essential oil 중의 성분들이었으나 8-hydroxy-linalool, ${\beta}-selinene$, tetradecanoic acid 및 pentadecanal은 essential oil 중의 성분들이 변화한 것이었다. 이외에도 tangeretin, nobiletin, 및 stigmasterol이 검출되었다. 버섯 균사체 분말에서 검출된 휘발성 성분들은 18종이었으며, ${\beta}-elemene$, germacrene-D 및 ${\delta}-cadinene$은 버섯이나 균사체에서 보고되지 않은 것으로 보아 균사체 배지로 사용한 착즙박에서 유래한 것으로 생각된다. caryophyllene, hexadecanoic acid, decanoic acid 및 tetradecanoic acid는 기 보고된 버섯이나 균사체의 성분들이었으며, Limonene-1,2-epoxide, ethyllinoleate, 1,2-benzenedicarboxylic acid, dicyclohexyl ester 및 ($3{\beta}$,24S)-stigmast-5-en-3-ol (${\gamma}-sitosterol$)은 감귤이나 버섯 균사체에서 보고되지 않은 성분들이 검출되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.51-60
• /
• 2006

가래나무 수피를 채취하여 건조시킨 후 분말로 제조하고 3.2 kg을 아세톤-물(7:3, v/v) 혼합용액으로 추출하여 유기용매를 제거한 후 헥산, 메틸렌클로라이드, 에틸아세테이트 및 물을 사용하여 네 개로 분획하고 에틸아세테이트 및 수용성 분획물에 대하여 칼럼 크로마토그래피를 수행하였으며 용리용매로는 메탄올 수용액과 에탄올-헥산 혼합액을 사용하였다. 그 결과 flavanol 화합물인 pinobanksin, taxifolin 및 ampelopsin, flavonol 화합물인 kaempferol, quercetin 및 myricetin 과 flavone glycoside 화합물인 afzelin, astragalin, quercitrin, isoquercitrin 및 myricitrin을 단리하였으며 NMR 및 MS 스펙트럼을 이용하여 구조를 결정하였다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.489-494
• /
• 2013

Nano-sized titanium oxide powders were synthesized by a polymer matrix technique using pulp and Titanium tetraisopropoxide (TTIP) as starting materials. The synthesized powders were characterized by XRD and FE-SEM. The particle size of the powders was controlled by preparation conditions, such as heat treatment temperature and time. After investigating various drying and heat treatment conditions, 50-100 nm sized homogeneous titanium oxide particles were obtained by treating at $600^{\circ}C$ for 1 h. The crystallization and rapid growth of particles was accelerated by increasing heat treatment temperature and time. Anatase phase generated below $600^{\circ}C$ transformed to the rutile phase with increasing heat treatment temperature. Moreover, above $800^{\circ}C$, heat treatment time had a very large influence on particle growth, and changing the heating condition also had a large influence on crystal growth.

• 청정기술
• /
• 제26권4호
• /
• pp.270-278
• /
• 2020

팔라듐(Pd)은 희소금속임에도 불구하고 보석, 촉매 및 치과 소재와 같은 다양한 산업 응용 분야에 널리 사용되고 있다. 이러한 가운데 폐자원으로부터 고순도 Pd를 회수하는 기술들이 주목받고 있다. 본 연구에서는 염산 용액에서 팔라듐 침출 및 회수를 위한 최적 조건을 조사하였다. 염산 농도, 침출온도, 침출시간, 산화제 농도 및 광액 농도 등 다양한 실험조건에서 팔라듐 침출 실험을 수행하였다. 염산농도 3 M, 산화제 3 vol%, 침출온도 80 ℃, 침출시간 60분에서 약 97.2%의 침출율을 나타내었다. 과산화수소/차아염소산나트륨의 비율은 침출용액 내 염소 이온 농도를 증가시켜 팔라듐 침출을 용이하게 하는 역할을 하는 것으로 확인하였다. 또한 pH 7에서 포름산을 첨가하여 80 ℃에서 30분 간 교반할 시 99.6% 순도를 가지는 팔라듐 분말을 회수할 수 있었다. 이는 포름산이 80 ℃에서 수소 가스와 이산화탄소로 분해되어 환원제 역할을 하였기 때문이라고 사료된다. 따라서 회수 되어진 고순도 팔라듐 분말은 회로, 촉매 전구체 및 수술기구에 사용될 것으로 기대되어진다.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.109-118
• /
• 1989

The purpose of this study was to investigate the bio-stimulating effect of low power density laser radiation on the mechanically exposed pulp. Class V cavities on dog's teeth were prepared and the pulps were mechanically exposed with a round bur. In control group, the exposed pulps were capped with $Ca(OH)_2$ powder and the cavities were sealed with Z.O.E.. In experimental group A, the pulps were irradiated with GaA1As laser for 5 minutes and then they were treated the same as control group. In experimental group B, the exposed pulps were covered by aluminum foil and sealed with Z.O.E. after they were irradiated with the laser as the experimental group A. In the all groups, the pulps were histopathologically observed at the time intervals of 1, 2 and 3 week after experiment and the results were statistically evaluated. The results were as follows: 1) In control and experimental groups, mild vascular congestion and bleeding was found in most of the specimens and for the new formation of dentin bridge, experimental group A had the most cases. The dentin bridge had discontinuous osteodentin like appearance without any dentinal tubules. Inflammatory cell infiltration consisted of acute and chronic inflammatory cell, and the formation of microabscess was also observed. 2) The degree of inflammatory cell infiltration was not significantly different among control group and experimental groups at 1 week, 2 week and 3 week. 3) The formation of new dentin bridge was not significantly different between control group and experimental group A at 1 week, but at 2 week and 3 week, experimental group A showed significantly more cases of new dentin formation than control groups. (P < 0.05). 4) Between control group and experimental group B, there was no significant difference in formation of the new dentin bridge at 1, 2 and 3 week. (P> 0.05). 5) There was no significant difference in formation of the new dentin bridge at 1 and 2 week between experimental group A and experimental group B, but at 3 week, the former significantly had more cases of new dentin bridge formation than the latter.(P < 0.05).

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.261-276
• /
• 1993

The purpose of this study was to evaluate for the cytotoxicity of glass-ionomer cement liners(GC liningcement, Ketac-bond, Vitrebond and Fuji lining LC) on the fibroblasts cultured from human pulp. The fibroblasts were cultured in DMEM-10% FBS medium. The measurement of pH, succinate dehydrogenase (SDH) activity test and $^{51}Chromium$ release test were performed. Viable cell count and $^{14}C$-leucine incorporation rate were evaluated following culture time of 2, 4 and 6 days. The results of this study were as follows : 1. The pH in all cements was to be neutralized as time elapsed, and Fuji lining LC was the lowest pH value among them. 2. SDH activity was more inhibited in GC lining cement and Vitrebond than Ketac-bond and Fuji lining LC with the setting process, and GC lining cement and Ketac-bond were reduced after 5 minute's setting and then elevated as time elapsed. 3. In SDH activity test following exposure time, the activity in Vitrebond, GC lining cement and Fuji lining LC was inhibited with increased exposure time, but it was fairly constant in Ketac-bond. 4. Overall the liquid component was more inhibited than the powder component of glass-ionomer cement in SDH activity test. 5. In $^{51}Cr$-release test, Fuji lining LC was the most released of all the cements tested and followed by : Vitrebond, Ketac-bond, GC lining cement. 6. In viable cell count, the number of cells increased as the culture day proceeded in Ketac-bond, but they decreased in GC lining cement. Fuji lining LC was only observed after 2 days culture and there was not observed the whole culture days in Vitrebond. 7. In $^{14}C$-leucine incorporation rate test, protein synthesis was decreased with the number of culture days in GC lining cement, Vitrebond and Fuji lining LC, but it was followed that of control in Ketacbond.

• 청정기술
• /
• 제30권2호
• /
• pp.105-112
• /
• 2024

전 세계적으로 기후변화에 따른 온실가스 규제로 전기자동차의 수요가 급증하고 있으며, 주요 부품인 전지의 수명 문제로 추후 폐전지의 발생으로 이어지게 된다. 이에 리튬이온전지 중 폐LFP(LiFePO₄)전지의 양극재로부터 유가금속인 리튬을 선택적으로 선침출 및 회수하고자하였다. 이때, 일반적으로 사용되는 무기산은 독성가스 배출 또는 다량의 폐수가 발생되어 환경문제를 야기시킨다. 이를 대체하기 위하여 유기산 및 기타 침출제를 이용하여 리튬을 침출하는 연구가 수행중이며, 본 연구에서는 유기산인 메탄술폰산(Methane sulfonic acid, MSA, CH₃SO₃H)을 이용하여 선택적으로 선침출하였다. 리튬을 선침출하기위한 최적의 조건을 확인하기 위하여 MSA 농도, 광액농도 그리고 과산화수소 투입량을 변수로 하여 실험을 진행하였다. 본 연구를 통해 리튬은 약 100% 그리고 철 및 인 성분은 약 1% 내외로 침출되어 분리 효율 및 변수에 따른 주요 성분의 침출률을 확인할 수 있었다.

• 한국식품과학회지
• /
• 제27권5호
• /
• pp.673-679
• /
• 1995

Valencia 오렌지로부터 추출한 펙틴에스테라제(pectinesterase, PE) 중에서 가열처리하지 않은 PE 조효소를 CM-Sephadex C-50, Phenyl Sepharose CL-4B와 CM-Biogel A의 chromatography를 차례로 수행하여 내열성이 약한 TLPE(thermolabile pectinesterase)와 내열성이 강한 TSPE(thermostable pectinesterase)를 분리 정제하였다. PE 중에서 가열처리한 PE 조효소에서는 위와 같은 정제과정으로 TSPE 만을 분리하였다. TLPE는 비활성 1,005 units/mg이고 35배로 정제된 것을 13.6% 회수할 수 있었으며, 반면에 가열하지 않고 분리한 TSPE는 비활성 3,115 units/mg이고 100.5배로 정제된 것을 1.5% 얻을 수 있었으나 가열하여 분리한 TSPE는 비활성 1,803 units/mg이고 가열처리한 조효소가 140배로 정제된 것을 15.4% 얻을 수 있었다.