• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.54-59
• /
• 1985

From the foregoing papers, it has been clarified that the push-pull current-fed DC-DC converter is excellent in stability as compared with the other conventional DC-DC con-verters. The relation between the stability of the converter and the capacitance of smoothing condenser is analyzed, considering the ESR of smoothing condenser and the 1 st order phase lag of the feedback circuit. From the results, it is known that when the capacitance of smoothing condenser is reduced, the stability of the converter is also excellent as compared with the conventional buck type converter, whereas there are limitations for practical use, since the ripple of output voltage increases by increasing of output current.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.335-338
• /
• 2008

New efficient red emitter having short p?-conjugation length and asymmetric bulky structure, 2-(7-diphenylamino-benzo[1,2,5]thiadiazole-4-ylmethylene)-malononitrile, was synthesized and characterized. Using this material as a dopant, we fabricated electroluminescence device with a structure of ITO/DNTPD/NPD/BTZA (5 wt% in Alq3)/Alq3/LiF/Al. The device exhibited a high brightness of 761 cd/m2 at a driving voltage of 4.8 V, and current efficiency is 0.75 cd/A. The Commission International de IEclairage (CIE) coordinates of the EL device were found to be (0.62, 0.37) at 10 mA/cm2.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.95-103
• /
• 2006

In this paper, a novel prototype of auxiliary switched capacitor assisted voltage source soft switching PWM Single-Ended Push Pull (SEPP) series capacitor compensated load resonant inverter with two auxiliary edge resonant lossless inductor snubbers is proposed and discussed for small scale consumer high-frequency induction heating (IH) appliances. The operation principle of this inverter is described by using switching mode equivalent circuits. The newly developed multi resonant high-frequency inverter using trench gate IGBTs can regulate its output AC power via constant frequency edge-resonant associated soft switching commutation by using an asymmetrical PWM control or duty cycle control scheme. The brand-new consumer IH products which use the newly proposed edge-resonant soft switching PWM-SEPP type series load resonant high-frequency inverters are evaluated using power regulation characteristics, actual efficiency vs. duty cycle and input power vs. actual efficiency characteristics. Their operating performance compared with some conventional soft switching high-frequency inverters for IH appliances is discussed on the basis of simulation and experimental results. The practical effectiveness of the newly proposed soft switching PWM SEPP series load resonant inverter is verified from an application point of view as being suitable for consumer high-frequency IH appliances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6821-6829
• /
• 2014

The use of semiconductor devices as a component of eco-friendly motor vehicles has increased and their widespread use as high voltage switches is expected. On the other hand, in the case of high-voltage switches, reliability test equipment is not localized. To test high voltage switches, this paper analyzed the relevant test standards for developing power supplies. In particular, for the automotive semiconductor reliability test, the AEC (Automotive Electronic Council) Q101 was analyzed. Based on that, the standard specifications of the power supply were determined. For the main power circuit, the pull bridge converter was adopted and based on the specification, the circuit parameters were determined and verified by simulation. The interface for the parallel and pattern operation was designed. The characteristics of the power supply were tested.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.2
• /
• pp.101-107
• /
• 2016

The main target in this paper is the localization of VME Type EPSM in Generator Exciter(EX2100) System. Developed EPSM has the compatibility with the existing product in the structure and shape and electrical feature and so on, but it has a much improved capacity and reliability in comparison with origin company product. this paper, to improve these functions, put emphasis on protection, monitoring, power capacity increase(over 120%), an enlarged scale of input voltage supply, AC/DC dual voltage use and so on. After manufacturing product localization, it was carried out several tests for the performance and reliability verification of developed product. These tests were performed in Authorized Inspection Agency(KTL) and field application test and maker self-test were additionally performed. Finally, the results of all tests were "success".

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.102-106
• /
• 2009

This paper presents the design and optimization of output matching network according to envelope for class F power amplifier(PA) which is to apply to envelope elimination and restoration(EER) transmitter. In this paper, to increase the PAE of class F power amplifier which applies to EER transmitter, the varactor diode has been used on output matching network. As envelope changes, it optimizes constitution of harmonic trap that is short circuit in 2nd-harmonic and is open circuit in 3rd-harmonic. When drain voltage changes from 25 V to 30 V, some percentage is improved in the PAE.put the abstract of paper here.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.567-575
• /
• 2015

An improvement in the current fed parallel resonant half bridge (CFPRHB) circuits used in fluorescent lamp electronic ballasts is provided in this paper. The CFPRHB belongs to the self-oscillating family which includes the current fed push-pull and series resonant inverters, most of which are used in instant-start applications. However, many failure modes are related to the bypass capacitor according to an analysis of failed samples. In this paper, the operating functions of the existing topology in the steady state are analyzed and the main root cause of failure modes has been found. Comparisons between the two topologies are conducted in terms of the voltage stress of the bypass capacitor as well as the thermal and performance of the ballasts to verify the advantages of the proposed topology. It is found that the improved topology is capable of enhancing the reliability and reducing the cost of products without having a negative influence on the system performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.840-843
• /
• 2005

For an analysis of nonlinear dynamic behavior in carbon nanotube(CNT) an electrostatic force of CNT was investigated. The boundary condition in the CNT was assumed to clamped-clamped case at both ends. This type of CNT is widely used as micro and nano-sensors. For larger gaps in between sensor and electrode the van der Waals force can be ignored. The electrostatic force can be expressed as linear form using Taylor series. However, the first term of the series expansion was investigated here. The electrostatic force From this study we can conclude that for larger gaps the electrostatic force play an important role in determining the deflections as well as the pull-in voltage of simply supported switches.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.158-163
• /
• 2009

A shading ring in an AC solenoid plays an important role in reducing vibration and humming sound. Estimation of performance of the shading ring placed in a stator pole of the AC solenoid is not an easy task due to the difficulty in measurement of the current and flux linkage of the shading ring. In this paper, dynamic performance of an AC solenoid with a shading ring is analyzed through the simulation using electromagnetic analysis software and the results are verified by simple AC and DC voltage tests. Both the simulation and experimental results show that the shading ring in the AC solenoid not only increases pull force, but also reduces operation time, vibration and humming sound.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.226-228
• /
• 2006

This paper presents the two lossless auxiliary inducors-assisted voltage source type half bridge(single ended push pull:SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation forwide its output power regulation ranges and load variations under constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operatprinciple is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation charactertics-based on the high frequency PDM strategy. The experimenoperating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimenones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliimplemented here is proved from the practical point of view.