• 대한물리치료과학회지
• /
• 제25권2호
• /
• pp.47-54
• /
• 2018

Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.29-38
• /
• 2005

The track pull-in behavior analysis in an optical disk drive (ODD) using plane phase and the evaluations for effecting parameters of it are discussed. Track pull-in, track capture procedure to do track following control, is a key factor to increase data transfer rate. First, the relative velocity between the beam spot of an optical pick-up and the target track of an optical disk is analyzed during the track pull-in procedure. In this process, it is showed that the track error signal has nonlinear characteristics which are depending on the time. Second, Runge-Kutta method to solve the nonlinear equation is applied to find the track pull-in behavior, and some optimal parameters to get stable and fast pull-in condition are obtained. Then, the phase plane analysis for track pull-in procedure is presented. Finally, some comments for the simulated results are discussed briefly.

• Clinics in Shoulder and Elbow
• /
• 제25권1호
• /
• pp.15-21
• /
• 2022

Background: This study was performed to identify the incidence of screw in-type lateral anchor pull-out in patients older than 60 years who underwent rotator cuff repair for large to massive rotator cuff tear (RCT). Methods: We reviewed 25 patients over 60 who were diagnosed with large to massive RCT and underwent arthroscopic rotator cuff repair in our hospital from March 2017 to February 2021. Preoperative tear size (anterior to posterior, medial to lateral) was measured via preoperative magnetic resonance imaging (MRI). All 25 patients underwent MRI scanning on postoperative day 1 and at 3 months after surgery. The change of anchor position was measured in axial views on MRI images postoperative day 1 and 3 months after surgery. And it was statistically compared according to bone mineral density (BMD), sex, and number of lateral anchors. Results: Two MRIs (postoperative day 1 and 3 months) in 25 patients were compared. Anchor pull-out occurred in six patients during 3 months (6.7%), and the mean pull-out length difference was 1.56 mm (range, 0.16-2.58 mm). There was no significant difference in the number of pull-out anchors, degree of pull-out difference by comparing BMD (A, BMD≤-2.5; B, BMD>-2.5), sex, or number of anchors used in each surgery (C, two anchors; D, three anchors) (p>0.05). Conclusions: Pull-out of screw in-type anchors was rarely observed and the mean pull-out length difference was negligibly small in our study. The screw in-type lateral anchor seems to be a decent option without concern of anchor pull-out even in elderly patients.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.137-144
• /
• 1999

Recently a removable soil nail is demanded due to problems beyond of economical and engineering purpose. In this study removable soil nails are developed and field pull-out tests are carried out 16 times in order to analysis pull-out characteristics of the removable soil nail. For the spacing and the installed position of fixed socket, the length of the soil nail, and W/C ratio of cement grout in the removable soil nail, pull-out characteristics of pull-out tests are analyzed. From the pull-out characteristics of removable soil nails, it is found that the spacing of fixed socket and W/C ratio of cement grout are important design parameters.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.194-201
• /
• 2000

It is called vehicle pull when a vehicle drifts in the lateral direction under the straight-ahead motion with no steering or external input. Recently vehicle pull draws attention as one of the critical evaluation items from the customers on the vehicle quality. It is generally recognized that the vehicle pull is complex phenomena due to internal and external factors. In this paper the relations between vehicle pull and ire were investigated through close survey on the road test results from the final inspection of car manufactures. Through this investigation the factors are identified which play an important role in causing vehicle pull problem.

• Macromolecular Research
• /
• 제13권3호
• /
• pp.257-264
• /
• 2005

Polyurethanes containing z-Iysine segments in the main chain (PULL) were synthesized from 4,4'-diphe-nylmethyl diisocyanate, poly(tetramethylene glycol), and z-Iysine oligomer as a chain extender. The PULL film was treated first with a $10\%$ HBr-acetic acid solution and subsequently with a saturated sodium bicarbonate aqueous solution to produce a primary amine group on the surface (PULL-N). Lactobionic acid (LA)-immobilized PULL (PULL-L) was prepared by the coupling reaction of the PULL surface amine groups and the LA carboxylic acid groups. The surface-modified PULLs were then characterized by attenuated total reflection-Fourier transform infra-red spectroscopy, electron spectroscopy for chemical analysis, atomic force microscopy, and contact angle goniometry. In the hepatocytes adhesion experiment, the cells poorly adhered to the PULL surface, although they adhered moderately well to the PULL-N surface. On the other hand, the cells adhered well to the PULL-L surface, suggesting the good affinity of the surface $\beta$-galactose moieties for hepatocytes. When hepatocytes were cultured in the presence of epidermal growth factor for 48 h, the cells rapidly aggregated on the PULL-L surface, whereas they aggregated only slowly on the other surfaces. The PULL prepared in this study has the potential to be used as a coating material for the enhancement of hepatocyte adhesion.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2000년도 춘계학술발표논문집
• /
• pp.36-39
• /
• 2000

멀티미디어 통신 시스템은 멀티미디어의 특성상 대용량 데이터를 처리하기 위한 버퍼 관리기법이 요구된다. 버퍼에 있는 데이터를 전달하는 방식에는 데이터를 제공하는 서버가 데이터 흐름을 제어하는 Push 방식과 데이터를 제공받는 클라이언트가 데이터 흐름을 제어하는 Pull 방식이 있다. 그러나 RTP를 사용하는 기존의 멀티미디어 통신 시스템의 경우 서버와 클라이언트 사이에 Push 방식과 Pull 방식 중의 하나만을 제공하기 때문에 다양한 미디어의 재생을 지원하기에는 한계가 있고, 인터렉티브한 통신이 불가능하다. 더욱이, Push/Pull 두 가지 방식을 모두 지원한다하더라도 단일화된 버퍼 구조를 제공하지 않아 메모리 사용의 낭비가 있다는 단점이 있다. 이를 해결하기 위하여 , 본 논문에서는 RTP를 사용하는 멀티미디어 통신환경에서 각각 단일화된 버퍼구조 구조를 가지고 있는 서버와 클라이언트 사이에 Push 방식과 Pull 방식의 전송방식을 모두를 지원할 수 있는 통합된 Push/Pull 전송 모델을 제안한다. 이 기법은 서버와 클라이언트 사이에서 Peer-to-Peer 개념으로 인터랙티브한 Push/Pull 전송을 지원할 뿐만 아니라 일관된 인터페이스를 지원하는 단일 버퍼 구조를가짐으로써 시스템의 메모리 효율을 향상시킬 수 있다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.478-480
• /
• 2008

On this paper, digitally controlled push-pull dc-dc converter and dc-ac inverter for induction motor control are presented, which is used one DSP(digital signal processor). This system has 12V battery input for the push-pull converter, and the push-pull converter generates 300V output for induction motor inverter input. In order to compensate the push-pull converter, the transfer function of push-pull converter is derived and digital PI compensator is adapted. Through bode diagram, stability of digital controlled push-pull converter is analyzed. To verify the proposed system, digital simulation of the induction motor drive using digital push-pull converter are performed.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.87-100
• /
• 1996

그리드(grid) 형태의 토목섬유와 흙 사이의 마찰특성은 표면마찰 뿐만아니라 그리드에 의한 수동저항을 동시에 측정할 수 있는 인발시험(pull-out test)에 의해 평가되고 있다. 본 연구에서는 보강토 구조물에서 가장 많이 사용되고 있는 지오그리드(geogrid)와 국내에 널리 분포되어 있는 화강 풍화토를 대상으로 실내 인발시험을 수행하였으며, 인발시험의 주요 영향 인자들인 인발속도, 토조 전면벽의 위치, 지오그리드 시료의 폭 및 지오그리드 수동 저항부재의 유.무 등이 흙/지오그리드 마찰특성에 미치는 영향을 평가하였다.

• 경영과학
• /
• 제10권2호
• /
• pp.121-143
• /
• 1993

Traditional Manufacturing method is push system by plan made in advance and Japanese manufacturing method represented by JUST-IN-TIME is pull system which respond's to the demand flexibly. Both have their pros and cons. In general, it is well understood that push system is faster than pull system in the sense of manufacturing speed. However, pull system such as JIT excelles dramatically in the sense of work in process. Therefore, this paper is trying to put together to get alternative which has the advantage of both system. The objective of the paper is to enhance the effect of built-in manufacturing system without paying extra cost by way of introducing the alternative of the pull-push manufacturing strategic operational method.