• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.647-652
• /
• 2015

Pull-in voltage model of nano-electro-mechanical system with graphene is investigated for the device optimization. In the pull in voltage model, thickness of graphene layer is assumed to be uniform in vertical and lateral direction. Finite element analysis simulation has verified the feasibility of the suggested model. From the suggested model, pull-in voltage change with graphene thickness and cantilever length can be estimated. Maximum induced stress and graphene thickness have a reciprocal relationship.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.944-955
• /
• 2009

In this thesis the model tests were performed to the pull-out characteristics of a suction pile subjected to a pull-out in sands. For this model tests, three different soil conditions ($D_r$=45, 65, 82%), three pile diameters (D=100, 150, 200mm) and three pile lengths (L=100, 150, 200mm), were changed. And the experimental results were also compared with those by the theoretical methods. The results by the experimental and theoretical analysis are as follows. The ultimate pull-out resistances increased as the relative density of sands, pile diameter, length and the ratio of pile length to diameter increased. The ultimate pull-out resistance by Meyerhof method(1973) overestimated that by the model test, but the results using the soil-pile friction angle suggested by Aas(1966) in the Meyerhof(1973) method were in good agreement with the experimental results.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.127-143
• /
• 2015

Steel fibre reinforced concrete (SFRC) is an anisotropic material due to the random orientation of the fibres within the cement matrix. Fibres under different inclination angles provide different strength contribution of a given crack width. For that the pull-out response of inclined fibres is of great importance to understand SFRC behaviour, particularly in the case of fibres with hooked ends, which are the most widely used. The paper focuses on the numerical modelling of the pull-out response of this kind of fibres from high-strength cementitious matrix in order to study the effects of different inclination angles of the fibres to the load-displacement pull-out curves. The pull-out of the fibres is studied by means of accurate three-dimensional finite element models, which take into account the nonlinearities that are present in the physical model, such as the nonlinear bonding between the fibre and the matrix in the early stages of the loading, the unilateral contact between the fibre and the matrix, the friction at the contact areas, the plastification of the steel fibre and the plastification and cracking of the cementitious matrix. The bonding properties of the fibre-matrix interface considered in the numerical model are based on experimental results of pull-out tests on straight fibres.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.142-152
• /
• 2004

The liquid entrainment and vapor pull-through offtake model of RELAP5/MOD3 had been developed for SBLOCA (Small Break Loss of Coolant Accident). The RELAP5/MOD3 model for horizontal volumes accounts for the phase separation phenomena and computes the flux of mass and energy through a branch when stratified conditions occur in the horizontal pipe. In the case of CANDU reactor, this model should be used in the coolant flow of 95 feeders connected to the reactor header component under the horizontal stratification in header. The current RELAP5 model can treat the only 3 directions junctions; vertical upward, downward, and side oriented junctions, and thus improvements for the liquid entrainment and vapor pull-through model were needed for considering the exact angles. The RELAP5 off-take model was modified and generalized by considering the geometric effect of branching angles. Based on the previous experimental results, the critical height correlation was reconstructed by use of the branch line connection angle and validation analyses were also performed using SET. The new model can be applied to vertical upward, downward and angled branch, and the accuracy of the new correlations is more improved than that of RELAP5.

• 대한치과교정학회지
• /
• 제16권1호
• /
• pp.71-84
• /
• 1986

The purpose of this study was to analyze the effect of orthopedic forces on the craniofacial complex utilizing the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear) For this study, the teeth and alveolar bone and palate were reproduced from birefringent materials and other parts of craniofacial complex were coated with birefringent material on the model. The effect of orthopedic forces on the craniofacial complex was analyzed by photoelastic method using transmission polariscope and reflection polariscope. The results were as follows. 1. The cervical pull head gear had the greatest tipping effect on the maxillary molars and high pull head gear had the least tipping effect. 2. In areas stressed, the cervical pull head gear stressed the greatest degree. 3. Only cervical pull head gear produced stress at the zygomaticofrontal suture and the posterior region of palate. 4. The straight pull head gear and high pull head gear produced stress at just inferior to the anterior nasal spine. 5. The cervical pull head gear and straight pull head gear produced tensile stress at the fronto-maxillary suture. 6. The pterygoid plates of the sphenoid bone, the zygomatic arches, the junction of the maxilla with the lacrimal and ethmoid bone, and the maxillary molars were affected by three types of head gear.

• 소성∙가공
• /
• 제30권2호
• /
• pp.83-90
• /
• 2021

In this paper, a parametric study on the influence of friction between materials on pull force in single clinching is conducted using an axisymmetric elasto-plastic finite element method and law of Coulomb friction. An appropriate finite element analysis model is given, which minimizes the effect of the material model and numerical factors including the number of quadrilateral finite elements and blank radius. It is emphasized that the elasto-plastic material model should be employed because the elastic deformation of the internal region is affected more by the pull force. It has been shown that the pull force increases as friction coefficient increases and that the optimized friction coefficient is around 0.4, which is qualitatively comparable with its theoretical value. When the friction coefficient reaches 0.5 in the example studied, the neck fracture is predicted.

• Journal of Information Technology Applications and Management
• /
• 제27권5호
• /
• pp.49-68
• /
• 2020

The Push-Pull-Mooring (PPM) model employ to explore the factors that affect the switching intention of mobile game players by analyzing the online survey data of 240 mobile game players in China. From the perspective of PPM model, Dissatisfaction with the current mobile game can promote players to leave the current mobile game, and other more attractive mobile games can pull players out of the current mobile game. As a mooring factor, habit can affect players' switching decisions. Players who have formed strong habits in current mobile games are more likely to resist or ignore the attractiveness of other mobile games and stay in the current mobile games rather than migrate to other mobile games. Another result shows that the more dissatisfied with the current mobile game, the higher the quality of alternative (relative challenge) mobile game, and the lower the investment size in the current mobile game, the more reluctant the players are to continue to maintain the relationship with the current mobile game. The higher the player's commitment to the current mobile game, the more likely it is to maintain the relationship with the current mobile game. The empirical results show that the framework of this study is highly consistent with the results of PPM model, and confirming that they can well apply to mobile game situations.

• 한국지반공학회논문집
• /
• 제29권1호
• /
• pp.121-133
• /
• 2013

본 논문에서는 사질토에서 스크류 앵커 파일의 인발 저항 특성에 대한 실험적 내용을 다루었다. SAP에 대한 소개 및 적용분야 등의 간략한 설명을 시작으로 스크류 파일의 인발저항특성에 대한 이론적 배경들과 축소모형실험의 수행 방법에 대해 소개하였다. 조밀한 모래조건과 느슨한 모래조건에서 스크류 앵커 파일의 인발저항특성을 분석하기 위해 스크류 사이의 간격인 피치와 스크류의 직경을 변화시켜 실험을 수행하였고, 스크류 앵커 파일의 파괴 메커니즘에 근거한 이론적 인발특성에 관한 기존연구들을 검토하여 비교하였다. 연구결과 조밀한 모래조건과 느슨한 모래조건 모두에서 피치의 변화에 따른 인발저항력의 차이는 매우 미미하였고, 직경의 변화에 따라 인발 저항력이 상대적으로 많이 증가함을 확인할 수 있었다. 본 논문에서는 실험결과를 사질토에서 스크류 앵커 파일의 인발저항특성을 파악할 수 있도록 제시하였으며 기존의 이론식과 비교하여 실무적 관점에서의 검토 내용을 기술하였다.

• 한국산학기술학회논문지
• /
• 제9권5호
• /
• pp.1289-1295
• /
• 2008

최근에 다양한 유비쿼터스 서비스는 Push와 Pull 서비스 형태로 제공되고 있으며, 이와 같은 Pull/push 서비스를 제공하기 위한 OpenAPI(Application Program Interface)에 대한 연구가 진행되고 있다. 하지만 아직 Push와 Pull 서비스와 이를 지원하기 위한 OpenAPI에 대한 연구가 아직 미비하다. 이에 본 논문에서는 Pull 서비스와 Push 서비스를 이용하여 센서 네트워크 기반의 응용 인터페이스를 제공하는 Push 서비스와 Pull 서비스 모델을 제시하고, Push 서비스와 Pull 서비스를 제공하는 OpenAPI를 설계하고 구현한다. 이를 위하여 웹 서비스 기반의 Pull 서비스 구조를 제시하고, .Net 프레임워크 기반의 원격 서비스(Remote Service)를 이용하여 센서 네트워크에 수집된 온도, 습도 등의 상황 데이터를 Pull 서비스 형태로 제공하는 OpenAPI를 설계하고 구현한다. 더불어 TCP/IP 소켓 인터페이스를 이용한 Push 서비스 구조를 제안하고, 이 서비스를 제공하는 OpenAPI를 설계하고 구현한다. 이를 통해서 기존의 특정 데이터베이스 중심의 센서 네트워크의 폐쇄적인 응용 인터페이스를 개방적인 표준 인터페이스로 전환하여 사용자가 여러 곳에 널려 있는 많은 상황 데이터를 쉽게 접근하여 확인할 것으로 기대한다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제30권4호
• /
• pp.71-94
• /
• 2021

Purpose The purpose of this study is to verify impacts of factors, representing Push-Pull-Mooring(PPM) on switch intention to OTT(Over-The-Top) service in demand for content and to find relationship between factors through empirical analysis. Design/methodology/approach This study designed a research model by deriving factors affecting the intention to switch on OTT service based on the Push-Pull-Mooring framework and researches on OTT service. To test the hypothesis, a total of 357 responses were collected from individuals with experience in using OTT service and analyzed using SPSS26 and SmartPLS3.0. Findings According to the empirical analysis result, this study confirmed that the push, pull, and mooring factors proposed in this study had a significant effect on switching intention on OTT service. In addition, this study confirmed that both low switching cost and need for variety had a significant effect except for hypothesis H8.