• Journal of the Korean Society of Clothing and Textiles
• /
• v.1 no.2
• /
• pp.81-88
• /
• 1977

In order to investigate seam puckering in thin fabrics for summer clothing, this experiment was conducted. Eight different fabrics were sewn with ten different kinds of sewing thread, three different sizes of stitch, and three sewing directions and effects on puckering were examined. The results are as follows: 1. More seam puckering appears on thin fabrics than on thick ones. 2. Less seam puckering appears with the smaller sizes of stitch. 3. Slant direction of sewing gets less seam puckering. 4. Almost no puckering appears with slant direction even after washing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.66-77
• /
• 1999

For this study It was measured the seam puckering based on the mechanical properties of tencel under the proper condition of needlework and machine sewing analyzed the mechanical properties which re influenced to the seam puckering and estimated the seam puckering based on the mechanical properties. The results of this study are as follows : There are three types of the seam puckering for each step which is caused by repeated washing and press. Concerning the seam puckering with the number of washing the more the number of washing is increased the less the seam puckering is decreased. Concerning the mecanical properties of the sample with the seam puckering. The seam puckering is related to LT positively B, 2HB, T, W negatively Among the mechanical properties LT, B, 2HB, T, W are most influenced to the seam puckering. Judging from the result of estimating seam puckering based on mechanical properties the estimate-formula is satisfied in this study.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.346-350
• /
• 2005

In this study, to investigate the influence on the seam puckering by the mechanical properties of textiles, it was measured from 4 polyester/cotton samples. We reached the following conclusion in influences of the seam puckering by the thread, iron and laundry. Seam puckering is occurred several times by repeating the laundry. according to iron method, the seam puckering is stronger in order of T/C1> T/C2> T/C3> T/C4 by the samples and order of 40's/2> 60's/3> 50's/2> 60's/2 by the threads, the relation between sample's mechanical properties and seam strength and obtainment of formula. We can find that seam puckering is related with B, 2HB, G, 2HG5, RC, T among the mechanical properties and the estimated formulas which get from mechanical factors.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1010-1020
• /
• 1997

For this study, we did needlework of the sample considering practical aspects of production and consumption of silk, high-quality material for women's clothes, and then analyzed the state of the seam puckering after press and dry cleaning, estimated the Seam Puckering based on the mechanical properties of silk related to machine sewing, and examined the effects which Mechanical Properties have on Seam Puckering closely. Through this, we reach the following conclusion. 1. There are three types of seam puckering for each stage, which are caused bathe smoothness of the surface by press, and the difference between the shrinkage rates of fabric and sewing thread by Dry Cleaning. 2. In analyzing seam puckering classified by each step, seam puckering after sewing the fabric is related to WT negatively, while to RT and W positively. Seam puckering after sewing and pressing the fabric is related to WT, RC, MMD negatively and seam puckering after sewing, pressing anddry cleaning the fabric isrelated to WT negatively, too. 3. Concerning the mechanical properties of the sample with a little seam puckering, WT, LC, WC, RC, MMD, SMD is relatively large while RT, B, 2HB is small. 4. Judging from the result of estimating seam puckering based on mechanical properties, the estimate-formula is satisfied in this study.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.363-373
• /
• 1973

The Sewability was tested with the seam strength and Puckering Grade by a general sewing machine according to some properties of simulated Leather, yarn tensile strength needle and stitches. The main results tested are as follows ; 1. The thick and uncomfortable leather is unable to be sewed by a general sewing machine, but the thin and soft one is able to. 2. The interval between stitches depends on type of leather used, and the variance in accordance with type of leather varies much more in the case of narrower interval. 3. When the sewability of leather-surface is not so good, is desirable to pour oil on the surface for the purpose of better efficiency. 4. The seam strength is directly proportional to interval of stitch and tensile strength of yarn and leather used, and needle No. 14 is more effective than No.1l. 5. The more the soft and thin leather is, the lower the Puckering Grade becomes. Type of yarn and interval of stitches do not seem to effect the Puckering Grade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.19-25
• /
• 1984

The experiment was undertaken to investigate the optimum condition in the effect of seam balance on seam puckering. Four kinds of fabrics were sewed with three kinds of yarns which were used with a seam balance of 90, 100, 110 and $120\%$. In this experiment, the following conclusions were obtained; The best appearance was achieved by a seam balance of $100\~120\%$ in Cotton fabrics, $100\~110\%$ in Rayon fabrics, $110\~120\%$ in Polyester fabrics and $120\%$ in Wool fabrics after laundering.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.03a
• /
• pp.186-195
• /
• 1995

In this study, drawing process of KFP engine airsealing bearing support part is analyzed by dynamic explicit finite element method. Puckering should be supressed to meet the specification. By investigating the influence fo process parameter, the feasible process condition can be obtained. The corresponding experiment is carried out. There is good agreement between the experiment and FE simulation . From this result, it is shown that the dynamic explicit finite element method can be used effectively to avoid puckering and wrinking problem in drawing process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.10a
• /
• pp.80-94
• /
• 1994

As for axisymmetirc sheet metal forming, a kind of pick-up apparatus for body-wrinkling is deviced. Experiments with both hemispherical and flat headed punches, with various clearances between punch and die, with respect to three kinds of materials each of which has two thicknesses, are performed. Firstly the process of evolution of body-wrinkling is observed. Then the critical blank-holding force (or meridional tensile force) for suppression of body-wrinkling at a specified punch-stroke is measured for all cases mentioned above. An empirical formula for it is proposed. Deformation patterns and stress distributions are analysed by the use of FEM. A simplified critical condition for body-wrinkling is formulated and introduced into the FEM program. And its effectiveness is checked by comparison with the experimental results. Using this FEM system, the governing factors of body-wrinkling are cleared up.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.363.2-363.2
• /
• 2002

A number of 2',3'-deoxynucleosides have been discovered to possess significant antiviral activity against HIV-1 and other viruses. Since it has been suggested that proper conformation of the dideoxynucleosides in terms of ring puckering of the five-membered sugar moiety is required for them to exhibit antiviral activity a number of nucleoside analogues to fix sugar-ring puckering have been synthesize and evaluated for antiviral activity. (omitted)

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.2
• /
• pp.15-22
• /
• 1979

The heat setting of sewing thread is known to have some puckering. In this experiment, the P/C fabrec and polyester thread were heat setted at temperatures ranging from $70^{\circ}C$ to $150^{\circ}C$ at the interval of every $^20{\circ}C$ for the period of 1, 5, 10, 20 and 40 minutes resoectivly. The results obtained are as follows: 1) In general, the pre-laundering sewing shrinkage related negatively to time but related positively to temperature. And it showed the lowest rate at $110^{\circ}C$. 2) In case of slack treatment, the post-laundering sewing sewing shrinkage marked the lowest rate at $130^{\circ}C$ while that of stretch treatment showed the lowest rate at $90^{\circ}C$. 3) The rates of post-laundering sewing shrinkage were higher than those of pre-laundering shrinkage, the difference between them reached the bottom when applied the slack treatment at $130^{\circ}C$ and the streched treatment at $110^{\circ}C$.