• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.433-442
• /
• 2012

We have proposed a solution to multicast services and an advanced quality of service (QoS) mechanism on a packet transport system (PTS) based on PBB-TE. The point-to-multipoint (PtMP) connection in the PBB-TE system have been realized by grouping point-to-point (PtP) PTL trunks and mapping a BSI onto the PtP PTL trunks using a multicast backbone destination address. To provide end-to-end QoS of the PtMP services, the hierarchical QoS scheme for backbone service instances and connection-oriented paths has been implemented in the PTS. For providing different capabilities for service selection and priority selection, the PTS offers to customers three basic types of the port-based, C-tagged, and S-tagged service interface defined by the IEEE 802.1ah. To offer to customers different capabilities of the layer 3 applications and services, moreover, an IP-flow service interface have been added. In order to evaluate traffic performance for PtMP services in the PTS, the PtMP throughputs for the link capacity of 1 Gbps at the four service interfaces were measured in the leaves of the ingress edge node, the transit node, and the egress edge node. The throughputs were about 96 % because the B-MAC overhead of 22 bytes occupies 4% of the 512-byte packet. The QoS performance is ability to guarantee an application or a user a required bandwidth, and could be evaluated by the accuracy of policing or shaping. The accuracy of the policing scheme and the accuracy of the shaping scheme were 99% and 99.3% respectively.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.211-215
• /
• 2014

The Pt-, Ni- and Cr-decorated tubular $SnO_2$ nanofibers for gas sensors were prepared by the electrospinning of polyvinylpyrrolidone (PVP) nanofibers containing Pt, Ni, and Cr precursors, the sputtering of $SnO_2$ on the electrospun PVP nanofibers, and the removal of sacrificial PVP parts by heat treatment at $600^{\circ}C$ for 2 h. Pt-decorated tubular $SnO_2$ nanofibers showed high response ($R_a/R_g=210.5$, $R_g$: resistance in gas, $R_a$: resistance in air) to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ with negligible cross-responses to other interference gases (5 ppm trimethylamine, $NH_3$, HCHO, p-xylene, toluene and benzene). Cr-decorated tubular $SnO_2$nanofibers showed the selective detection of p-xylene at $400^{\circ}C$. In contrast, no significant selectivity to a specific gas was found in Ni-decorated tubular $SnO_2$ nanofibers. The selective and sensitive detection of gases using Pt-decorated and Cr-decorated tubular $SnO_2$ nanofibers were discussed in relation to the catalytic promotion of gas sensing reaction.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.13-24
• /
• 2008

Objectives : The purpose of this study was to investigate the effect of Poncirus Trifoliata(PT) on improvement of fecal impaction in spinal cord injured(SCI) rats. Methods : Fifteen adult Sprague-Dawley female rats were used weighing 200~250 g. A complete spinal cord transection was performed surgically at the T10 cord level. Experimental groups were assigned into 3 groups: Control(n=5), SCI+vehicle(n=5) and SCI+PT(n=5). PT was administered 100mg/kg in 0.5ml every 24 hours from 1st operation day to 7th day. We measured the body weight and food intake as well as the number and the weight of fecal pellet every morning. After 1 week of operation, whole colon was divided into proximal and distal segments under anesthesia. Each segment of colon was mounted with longitudinal direction in a organ bath. We measured spontaneous contraction and compared the area under the curve in each segments. Enhanced responses were observed by acetylcholine($10^{-6}M$), 40 mM KCl solution, L-NAME($10^{-4}M$). Results : The fecal number and weights were significantly higher in the group of SCI+PT than SCI+vehicle group(p<0.05). In organ bath study, area under the curves of the spontaneous contraction in SCI+vehicle and SCI+PT groups were significantly increased compared to control group. Contractility of distal colon in response to acetylcholine or KCl in SCI+vehicle group was significantly decreased compared to other groups(p<0.05). Conclusions : These results suggest that PT might be useful to promote bowel emptying in spinal cord injured rats.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.80-83
• /
• 2000

The post-annealing treatments on rf magnetron sputtered PZT($Pb_{1.05}(Zr_{0.52},\;Ti_{0.48})O_3$) thin films($4000{\AA}$) have been investigated for a structure of PZT/Pt/Ti/Coming glass(1737). Crystallization properties of PZT films were strongly dependent on RTA(Rapid Thermal Annealing) annealing temperature and time. We were able to obtain a perovskite structure of PZT at $650^{\circ}C$ and 10min. P-E curves of Pd/PZT/Pt capacitor demonstrate typical hysteresis loops. The measured values of $P_r$, $E_c$ were $8.1[{\mu}C/cm^2]$, 95[kV/cm] respectively. Polarization value decrease about 25% after $10^9$ cycles.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.1
• /
• pp.50-55
• /
• 1992

Piezoelectric Buzzer which has been generally used requires about 30kV/cm poling process and has the aging effects. In this study, 0.85 PZN - 0.10 BT - 0.05 PT system ceramics with additives of 0 - 2 wt% YS12TOS13T were fabricated and investigated on electromechanical coupling coefficient(kS1pT), electric field induced charge coefficient(dS131T), and sound level. As the results, in the 0.4 wt% YS12TOS13T added composition ceramics compared with the basic, kS1pT was increased from 0.355 to 0.39 and induced piezoelectric d constant increased from 204 to 220 x 10S0-12T (C/N) and sound level of electrostrictive Buzzer has the highest value of 71.5 dB under 8kV/cm bias electric field.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.207-213
• /
• 2014

This study investigated the effects of microbial transglutaminase (MTGase) and pH-shift processing on the functional properties of porcine myofibrillar proteins (MP). The pH-shift processing was carried out by decreasing the pH of MP suspension to 3.0, followed by re-adjustment to pH 6.2. The native (CM) and pH-shifted MP (PM) was reacted with and without MTGase, and the gelling and emulsion characteristics were compared. To compare the pH-shifted MTGase-treated MP (PT), deamidation (DM) was conducted by reacting MTGase with MP at pH 3.0. Rigid thermal gel was produced by MTGase-treated native MP (CT) and PT. PM and DM showed the lowest storage modulus (G') at the end of thermal scanning. Both MTGase and pH-shifting produced harder MP gel, and the highest gel strength was obtained in PT. All treatments yielded lower than CM, and CT showed significantly higher yield than PM and DM treatments. For emulsion characteristics, pH-shifting improved the emulsifying ability of MP-stabilized emulsion, while the treatments had lower emulsion stability. PM-stabilized emulsion exhibited the lowest creaming stability among all treatments. The emulsion stability could be improved by the usage of MTGase. The results indicated that pH-shifting combined with MTGase had a potential application to modify or improve functional properties of MP in manufacturing of meat products.

• Korean journal of applied entomology
• /
• v.35 no.1
• /
• pp.85-90
• /
• 1996

Bacillus thuringiensis NT0423 produces quite a typical bipyramidal crystals of a common major band of ca. 130 kDa, and has dual specificity against Lepidoptera and Diptera. To enforce the Diptera-toxicity of B. thuringiensis NT0423, cryND gene was transformed 30 B. thuringiensis NT0423. The transfonnant B. thuringiensis PT1227 was obtained from introduction of pCGl0 into B. thuringiensis NT0423 by electroporation. The result showed that cryND and resident crystal protein genes in transformant were stably expressed with its own shape. Furthermore, the toxicity of B. thuringiensis PT1227 against Diptera was highly enforced, suggesting that the enforced toxicity of B. thuringiensis PT1227 was due to synergistic effect of both introduced and resident crystal proteins in transformant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.521-524
• /
• 2001

In this letter. we report on the investigation of Ti. Pt/Si/Ti Ohmic contacts to p-type 4H-SiC. The contacts were formed by a 2-step vacuum annealing at $500^{\circ}C$ for 1h. $950^{\circ}C$ for 10 min respectively. The contact resistances were measured using the transmission line model method. which resulted in specific contact resistivities in the $3.5{\times}10^{-3}$ and $6.2{\times}10^{-4}ohm/cm^{2}$, and the physical properties of the contacts were examined using x-ray diffraction. microscopy. AES(auger electron spectroscopy). AES analysis has shown that, at this anneal temperature, there was a intermixing of the Ti and Si. migration of into SiC. Overlayer of Pt had the effect of decreasing the specific contact resistivity and improving the surface morphology of the annealed contact.

• YAKHAK HOEJI
• /
• v.29 no.4
• /
• pp.188-192
• /
• 1985

Protopanaxadiol (PD) fraction and protopanaxatriol (PT) fraction were separated from thebutanol fraction of panax ginseng roots. Each group of mice was injected with morphine hydrochloride (40 mg/kg s.c.) three times at 8 hr intervals for a period of 6 days. PD fraction and PT fraction were injected (25, 100 mg/kg i.p.) to mice 1 hr prior to the third morphine injection daily. Inhibition of morphine tolerance was evidenced by the increase in analgesic response to morphine hydrochloride (10mg/ kg i.p.) as estimated by the tail flick method. Inhibition of morphine tolerance by PT fraction was effective but there was no remarkable difference in inhibition of tolerance development between control group andPD fraction group.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.521-524
• /
• 2001

In this letter, we report on the investigation of Ti, Pt/Si/Ti Ohmic contacts to p-type 4H-SiC. The contacts were formed by a 2-step vacuum annealing at 500$^{\circ}C$ for 1h, 950$^{\circ}C$ for 10 min respectively. The contact resistances were measured using the transmission line model method, which resulted in specific contact resistivities in the 3.5x10$\^$-3/ and 6.2x10$\^$-4/ ohm/$\textrm{cm}^2$, and the physical properties of the contacts were examined using x-ray diffraction, microscopy, AES(auger electron spectroscopy). AES analysis has shown that, at this anneal temperature, there was a intermixing of the Ti and Si, migration of into SiC. Overlayer of Pt had the effect of decreasing the specific contact resistivity and improving the surface morphology of the annealed contact.