• 센서학회지
• /
• 제13권6호
• /
• pp.405-410
• /
• 2004

Compensation wires for Pt/Pd thermocouple was manufactured using Cu/Ni alloys. Their thermoelectric voltage has been tested from room temperature to about $150^{\circ}C$. Alloys of $Cu_{95.5}Ni_{4.5}$ and $Cu_{89.5}Ni_{10.5}$ introduced only small emf differences to Pt/Pd thermocouples, indicating a real possibility of industrial use. Above $1000^{\circ}C$, the temperature difference was expected to he small as ${\pm}0.5^{\circ}C$, and the difference would be minimized by adjusting the Ni content with a small amount.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.830-834
• /
• 2008

NiSi is currently being employed in 45 nm CMOS devices as a contact material. We employed a first principles calculation to understand the movements of atoms when Co, Pd, and Pt were added to tetragonal-NiSi on Si (001). The Ni atoms in the tetragonal-NiSi/Si (001) favored away from the original positions along positive c-direction in a systematic way during the energy minimization. Two different Ni sites were identified at the interface and the bulk, respectively. The Ni site at the interface farther away from the interface was more favorable for Pd and Pt substitution. Co, however, prafered the bulk site to the interface site, unlike Pd and Pt.

• 대한금속재료학회지
• /
• 제48권2호
• /
• pp.148-153
• /
• 2010

The effects of Cu(II) and Al(III) on the extraction and separation of Pt(IV) and Pd(II) have been investigated in a mixed chloride solution using Alamine336 as the extractant. In the HCl concentration range of 1 to 5 M, more than 99% of Pt and Pd could be extracted by Alamine336 from all of the mixed chloride solutions investigated in this study. Lower HCl concentration led to a higher separation factor between Pd and Pt when Alamine336 concentration was constant. Extraction percentage of Cu increased with the increase of HCl concentration, while that of Al was nearly constant at 33% in our experimental range. The optimum conditions to extract Pt and Pd from Cu or Al and the separation factor under these conditions were obtained.

• 분석과학
• /
• 제19권4호
• /
• pp.333-341
• /
• 2006

PVP-protected Ag, Pd and $Pt_{50}-Ru_{50}$ colloids were prepared independently by using ${\gamma}$-irradiation and electron beam (EB) at ambient temperature. UV-visible spectra of these colloids show the characteristic bands of surface resonance and give evidence for the formation of nanoparticles. Transmission electron microscopy (TEM) experiments were used to know the morphology of nanoparticles prepared by ${\gamma}$-irradiation and EB. The size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by ${\gamma}$-irradiation was ca. 13, 2-3, 15 nm, respectively. While, the size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by EB was ca. 10, 6, and 1-3 nm, respectively. Cyclic voltamograms (CV) were recorded for the Au electrodes immobilized with these nanoparticles. CVs indicated the modifications in the surface as a result of immobilization.

• Journal of Pharmaceutical Investigation
• /
• 제16권4호
• /
• pp.135-138
• /
• 1986

Ginseng total saponins(GS), protopanaxadiol saponins(PD) and protopanaxadiol saponins(PT) antagonized the analgesia in mice induced by morphine. The administrations of 2,4-dihydroxyphenylalanine, and 5-hydroxytryptophan reduced the GS, PD and PT antagonisms of morphine analgesia. Possible mechanisms involved in the antagonistic actions of GS, PD and PT on morphine analgesia were described.

• 동력기계공학회지
• /
• 제3권2호
• /
• pp.20-25
• /
• 1999

Experiments were carried out to investigate the characteristics of formaldehyde emission from the small gasoline engine and its reduction technologies. Catalytic converters used are Pt/Rh, Pd/Rh, Pd/Pt, $62cell/cm^2$ monolith type. The measurement of formaldehyde was conducted by using the method of DNPH-GC. From the experimental results, formaldehyde emission increased in a lean mixture due to incomplete combustion of the hydrocarbons. The order of catalytic activity of formaldehyde oxidation was Pt/Rh > Pd/Rh > Pd/Pt. As the distance from the exhaust manifold to the inlet of the catalyst became far, in spite of lower catalyst temperature, formaldehyde concentration decreased because of the adsorption of formaldehyde.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.13-16
• /
• 2003

Magnetic and magneto-optical properties of Fe/Pt/Fe, Co/Pd/Co trilayers and also the sandwiches with wedge-shaped magnetic (Fe, Co) and nonmagnetic (Pt, Pd) layers were investigated. The oscillatory behavior of the saturation field $H_{s}$ of the studied trilayers with changing the thickness of the nonmagnetic layer (NML) $t_{NML}$ was revealed. That was explained by the exchange coupling between ferromagnetic layers (FML) through the nonmagnetic spacer. For the first time, oscillations of the transverse Kerr effect (TKE) with changing the Pt- and Pd-wedge thickness were discovered. Period of these oscillations was found to depend on the FML thickness and the photon energy of the incident light. TKE spectra of the examined samples were discovered to modify very strongly with increasing $t_{NML}$. The discovered peculiarities of magneto-optical properties of thin-film systems were explained by a concept of the spin-polarized quantum well states in the pt and Pd layers.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.219-224
• /
• 2001

N형 InGaAs에 대한 Pd/Ge/Ti/Pt 오믹 접촉 특성을 조사하였다. $450^{\circ}C$까지의 급속 열처리에 의해 우수한 오믹 특성을 나타내어 $400^{\circ}C$, 10초의 급속 열처리 조건에서 최저 $3.7\times10^{-6}\; \Omega\textrm{cm}^2$ 의 접촉 비저항을 나타내었다. 이는 열처리에 의해 생성된 Pd-Ge계 화합물의 형성 및 Ge의 InGaAs 표면으로의 확산과 관련이 있었다. 그러나 열처리 시간을 연장할 경우 접촉 비저항이 $low-10^5\; \Omega\textrm{cm}^2$로 약간 증가하였다. 고온 열처리 후에도 오믹 재료와 InGaAs의 평활한 계면을 유지하면서 우수한 오믹 특성을 나타내어, 화합물 반도체 소자의 오믹 접촉으로 충분히 응용 가능하다고 판단된다.

• 자원리싸이클링
• /
• 제26권3호
• /
• pp.79-91
• /
• 2017

수소연료전지자동차(FCV)의 핵심은 고분자고체형연료전지(Polymer Solid Fuell Cell: PEFC)이고 전지 중에서 전기화학적 전기를 발생하는 핵심 소재는 백금촉매이다. 백금은 남아프리카와 러시아 등에 편재되어있고, 백금의 세계생산량은 연간 약 178톤이고 고가이므로 리싸이클링 한다. 현재 PEFC에 Pt를 사용하는 양은 $0.2{\sim}0.1mg/cm^2$인데, 전지의 가격을 줄여서 FCV보급을 확대하기 위하여 사용하는 Pt양을 $0.05{\sim}0.03mg/cm^2$까지 감소시키는 것을 목표로 하여 각국이 연구 개발하고 있다. 나노배금 제조기술은 건식법과 습식법으로 크게 나누며 습식환원법을 중심으로 제조하는 방식이 Pt를 제조하는데 유리하다. 나노Pt를 이용하여 폴리올법, 개량형 Cu-UPD/Pt 치환법 및 나노캡슐법 등에 의해 $Pt-Pd/Al_2O_3$, Pt/C, Pt/GCB, Pt/Au/C, PtCo/C, PtPd/C 등의 Pt촉매가 연구 개발되고 있으며, Pt촉매의 활성향상 및 안정화 기술 등이 보고되고 있다. 본고는 나노Pt와 나노Pt촉매의 제조기술 및 폐 촉매의 리사이클링 및 Pt촉매의 응용기술 경향을 조사 분석하였다.

• 한국결정성장학회지
• /
• 제7권2호
• /
• pp.309-314
• /
• 1997

Ag-Pd/$Al_2O_3$와 Pt 기판에 스핀온 방법으로 제조된 PZT 후막의 열처리 방법에 따른 전기적 특성을 조사하였다. 전기적 특성을 측정하기 위하여 상부전극으로 은(Ag)을 PZT표면에 충착하였다. 이렇게 만들어진 PZT 후막의 결정구조는 X-ray로 조사하였으며, 유전상수는 HP4284A를 사용하여 1 KHz, 10 mV에서 측정하였다. 또한 유전계수는 Berlincourt 피에조메터를 사용하여 측정하였다. 그 결과 3 wt% PbO가 첨가된 PZT 후막의 전기적 특성은 오히려 감소하였으며, Ag-Pd 전극은 Pt 전극을 대체할 수 있는 가능성이 매우 높았다. 특히 스핀온 방법으로 제조된 PZT 후막을 급속열처리(RTA)를 함으로써 전기적 특성을 크게 향상시킬 수 있었다.