• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.229-236
• /
• 1998

Ferroelectric $Sr_xBi_yTa_2O_{9+\alpha}$/(0.7$\leqSr\leq1.0,\; 2.0\leqBi\leq2.6)$ solutions were prepared by MOD (Metalorganic Deposition) process. These solutions were made into thin films with thickness ranging from 1500~2000${\AA}$ by spin coating. The phase transformation of the SBT thin films by variation of annealing temperature and annealing time were observed using high temperature XRD and SEM. The crystallization and grain growth of SBT thin film were accomplished at $800^{\circ}C$ for 30 minutes after deposition of Pt top electrode by sputtering to prevent electrical breakdown. Ferroelectric properties of the SBT thin films were measured in the range of $\pm$3V\; and\; \pm5V$. The specimen with composition ratio of Sr/Bi/Ta (0.8/2.4/2.0) has the excellent ferroelectric properties ; $2P_r = 10.5,\; 13.2\muC/cm^2 \;at\; \pm3V\; and\; \pm5V$ respectively. Observing the post annealed Pt/SBT/Pt interface by SEM, it was found that Pt electrode sputtered on to the SBT thin film penetrated into the hollow on the SBT thin film, thus decreasing the effective insulation thickness. The effective insulation thickness recovered by post annealing, and this was confirmed by leakage current density measurement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.5-8
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_{2}O_{9}(SBT)$ thin films are deposited on Pt-coated electrode$(Pt/TiO_{2}/SiO_{2}/Si)$ using RF magnetron sputtering method. With increasing annealing tempera ture from $600[^{\circ}C]$ to $850[^{\circ}C]$, Bi-layered perovskite phase was crystallized above $650[^{\circ}C]$. The dielectric constant is 213 at annealing temperature of $750[^{\circ}C]$ and dielectric loss have a stable value within 0.1. Leakage current density is $1.01{\times}10^{-8} A/cm^{2}$ at annealing temperature of $750[^{\circ}C]$ The fatigue characteristics of SBT thin films did not change up to $10^{10}$ switching cycles.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1546-1548
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode(Pt/$TiO_2$/ $SiO_2$/Si) using RF magnetron sputtering method. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], Bi-layered perovskite phase was crystallized above 650[$^{\circ}C$]. The dielectric constant is 213 at annealing temperature of 750[$^{\circ}C$] and dielectric loss have a stable value within 0.1. Leakage current density is $1.01{\times}10^{-8}A/cm^2$ at annealing temperature of 750[$^{\circ}C$].

• Korean Journal of Crystallography
• /
• v.11 no.2
• /
• pp.95-101
• /
• 2000

Ferroelectric SrBi2Ta2O9 (SBT) thin films of Pt/Ti/SiO2 electrode were fabricated using a sintered SBT target with various Bi2O3 content by rf magnetron sputtering. Good hysteresis loop characteristics were observed in the SBT thin films deposited with 50mol% excess Bi target. SBT thin films crystallized from 650℃ however, good hysteresis loop can be obtained in the film annealed above 700℃. pt/TiO2/SiO2 and Pt/SiO2 electrodes were also used to investigate the Pt electrode dependence of SBT thin films. SBT thin films showed random oriented polycrystalline structure and similar morphology regardless of electrodes with quite different surface morphology. A 0.2㎛ thick SBT film annealed at 750℃ exhibited the remanent polarization (2Pr) of μC/㎠ and coercive voltage(Vc) of 1V at an applied voltage of 5V.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.68-72
• /
• 2005

본 논문에서는 $Bi_{3}Ti_{4}O_{12}$에 Nd를 치환했을 때 향상되는 강유전체 특성을 sol-gel 방법을 이용하여 분석하였다. 이를 위해 $10\;wt\%$의 $12\%$과량의 Bi가 첨가된 $Bi_{3.15}Nd_{0.85}Ti_{13}O_{12}$ sol-gel 용액을 제작하였다. BNT 박막은 $Pt/TiO_2/SiO_2/Si$ 기판 위에 스핀 코팅 방법을 이용하여 증착하였으며, 최종 증착된 박막의 조성은 Rutherford backscattering spectroscopy 분석을 이용하여 $Bi_{3.15}Nd_{0.85}Ti_{13}O_{12}$임을 확인하였다. 200 nm 두께의 BNT 박막은 XRD 분석을 통해 (117)방향에서 강한 피크가 나오며, (001) 방향에서 Nd 치환에 따른 효과로 억제된 피크가 나오는 것을 확인하였다. Pt/BNT/Pt 구조를 이용하여 잔류분극을 측정한 결과 7 V에서 $48\;{\mu}\;C/cm^2$ 이 나왔다. 이것은 다른 강유전체 물질인 PZT, SBT, BLT보다 월등히 큰 값이다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.217-220
• /
• 2000

The SrBi$_2$Ta$_2$O$\_$9/(SBT) thin films are deposited on Pt-coated electrode(Pt/TiO$_2$/SiO$_2$/Si) using RF sputtering method. The SBT thin films deposited on substrate at 400-500[$^{\circ}C$]. SBT thin film deposited on Pt-coated electrodes have the cubic perovskite structure and polycrystalline state. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], flourite phase was crystallized to 650[。 and Bi-layered perovskite phase was crystallize ed above 700[$^{\circ}C$]. The maximum remnant polarization and the coercive electric field is 11.73[${\mu}$C/$\textrm{cm}^2$], 85[kV/cm] respectively at annealing temperature of 750[$^{\circ}C$]. The fatigue characteristics of SBT thin films deposited on Pt/TiO$_2$/SiO$_2$/Si substrate did not change up to 10$\^$10/ switching cycles.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.215-220
• /
• 2007

Thin films of $SBT(SrBi_2Ta_2O_9)$ having $Pt/SBT/Seed/Pt/Ti/SiO_2/Si$ structure were fabricated using self-seed layer method by R.F. Magnetron sputter. Self-seed layers were deposited at room temperature and $600^{\circ}C$, which had 30 nm thickness. To investigate crystallization of self-seed layer we characterized by XRD after various heat treatment. And we characterized the crystallinity and electrical properties of SBT on self-seed layer after various heat treatment.

• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.315-320
• /
• 2000

We have investigated the crystal structure and electrical properties of Pt/SBT/$ZrO_2$/Si (MFIS) and Pt/SBT/Si (MFS) structures for the gate oxide of ferroelectric memory. XRD spectra and SEM showed that the SBT film of SBT/$ZrO_2$/Si structure had larger grain than that of SBT/Si structure. $ZrO_2$ film between SBT film and Si substrate is confirmed as a good candidate for a diffusion barrier by the analysis of AES. The remanent polarization decreased and coercive voltage increased in Pt/SBT/$ZrO_2$/Pt/$SiO_2$/Si structure. This effect may increase memory window of MFIS structure directly related to the coercive voltage. From the capacitance-volt-age characteristics, the memory windows of Pt/SBT (210 nm)/$ZrO_2$ (28 nm)/Si structure were in the range of 1~l.5 V at the applied voltage of 4~6 V. The current densities of Pt/SBT/ZrO$_2$/Si with as -deposited Pt electrode and annealed at $800^{\circ}C$ in $O_2$ambient were $8\times10^{-8} A/\textrm{cm}^2$ and $4\times10^{-8}A/\textrm{cm}^2$ , respectively.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.405-409
• /
• 2019

Piezoelectric ceramic specimens with the $Pb(Mg_{1/3}Nb_{2/3})_{0.65}Ti_{0.35}O_3$ (PMN-PT) composition are prepared by the solid state reaction method known as the "columbite precursor" method. Moreover, the effects of the $Li_2O-Bi_2O_3$ additive on the microstructure, crystal structure, and piezoelectric properties of sintered PMN-PT ceramic samples are investigated. The addition of $Li_2O-Bi_2O_3$ lowers the sintering temperature from $1,200^{\circ}C$ to $950^{\circ}C$. Moreover, with the addition of >5 wt.% additive, the crystal structure changes from tetragonal to rhombohedral. Notably, the sample with 3 wt.% additive exhibits excellent piezoelectric properties ($d_{33}=596pC/N$ and Kp = 57%) and a sintered density of $7.92g/cm^3$ after sintering at $950^{\circ}C$. In addition, the sample exhibits a curie temperature of $138.6^{\circ}C$ at 1 kHz. Finally, the compatibility of the sample with a Cu electrode is examined, because the energy-dispersive X-ray spectroscopy data indicate the absence of interdiffusion between Cu and the ceramic material.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.170-173
• /
• 2006

Ferroelectric $Bi_{3.35}Sm_{0.65}Ti_3O_{12}(BST)$ thin films were deposited on $Pt(111)/Ti/SiO_2/Si(100)$ substrates by a sol-gel spin-coating process. In this experiments, $Bi(TMHD)_3$, $Sm_5(O^iPr)_{13}$, $Ti(O^iPr)_4$ were used as precursors, which were dissolved in 2-methoxyethanol. Thereafter, the thin films with the thickness, of 240nm were annealed from 600 to $720^{\circ}C$ in oxygen atmosphere for 1 hr, and post-annealed in oxygen atmosphere for 1 hr after deposition of Pt electrode to enhance the electrical properties. The remanent polarization and coercive voltage of the BST thin films annealed at $720^{\circ}C$ were $19.48\;{\mu}C/cm^2$ and 3.40 V, respectively, and a fatigue-free characteristics. As a result, Sm-substituted bismuth titanate films with good ferroelectric properties and excellent fatigue resistance are useful candidates for ferroelectric memory applications.