• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.227-228
• /
• 2012

In interfaces between carbon black or Pt and FTO glass in dye-sensitized solar cell counter electrodes, a marginal resistant channel for electrons, we tried to improve the connection by modifying the sintering process. A stepwise sintering process for carbon black and Pt counter electrodes was applied and its effect on power conversion efficiency was studied. Power conversion efficiencies of built-in DSSC made by a one-step sintering process with carbon black and Pt counter electrodes were about 5.01% and 5.02%, respectively. Cells made with the stepwise sintering process were 5.96% and 6.21%, respectively, indicating an 20% improvement. Fill factor (FF) increased, and it was them main reason for the power conversion efficiency improvement. Step wise sintering increased the adhesion of the interface and reduced the film thickness and surface roughness. As a result, the resistivity of the counter electrode and EIS impedance of DSSCs decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.435-436
• /
• 2008

Dye-sensitized Solar Cells(DSSCs) which convert incident sun light into electricity were expected to overcome global warming and depletion of fossil fuels. And it is one of study that is lately getting into the spotlight because manufacturing method is more simple and inexpensive than existing silicon solar cells. In this respect, DSSCs are in the limelight as the next generation solar cells. DSSCs are generally composed of a dye-modified $TiO_2$ photoelectrode, a Pt counter electrode, and an electrolytes containing a redox couple$(I^-/I_3^-)$. Among these elements, pt electrode were prepared by applying electric potential to FTO substrate in the $H_2PtCl_6$ solution. In this study, we report the solar cell efficiency depending on $PtCl_4$ concentration change. $PtCl_4$ concentration was 1mM, 5mM, 10mM, and 20mM, and adhered on FTO glass substrate by sintering process. When applied each $PtCl_4$ counter electrode on DSSC, the best efficiency was found at 10mM of $PtCl_4$ concentration. The catalyst promotes the movement of electron from the counter electrode to the electrolyte the higher the molarity, the better the efficiency. However, in case of 20mM, it is estimated that over-deposited $PtCl_4$ tends to restrict the movement of electron due to its bundle formation.

• 분석과학
• /
• 제27권6호
• /
• pp.308-313
• /
• 2014

염료감응형 태양전지의 광전극 및 상대전극에 탄소나노튜브를 도입하여 전지의 광전기적 특성 변화를 EIS, J-V 특성곡선 및 UV-Vis 분광기를 이용하여 분석하였다. $TiO_2$ 광전극의 전기전도도 및 광전효율을 향상시키기 위해 전자전달 촉진자 역할을 하는 multi-wall carbon nanotube (MWCNT)를 $TiO_2$와 혼합하여 $TiO_2$-MWCNT 복합체를 sol-gel 연소 복합공정을 통해 제조하여 조사한 결과 0.1 wt% MWCNT를 첨가한 경우, $TiO_2$만을 사용한 경우에 비해 약 12.5%의 향상된 효율을 보였다. $TiO_2$-MWCNT 복합체에서 MWCNT가 $TiO_2$ 층의 전자이동을 향상시켜 저항을 감소하고 염료와 전자의 재결합을 감소시킨 결과로 생각된다. 그러나 0.1 wt%보다 많은 MWCNT를 첨가할 경우 광투과도 및 염료의 흡착량을 감소시켜 효율이 감소하였다. 또한 상대전극에 MWCNT와 MWCNT-Pt를 적용하였을 경우 각각의 효율은 1.2%와 4.1%로 MWCNT만 적용할 때 보다 백금이 담지된 MWCNT를 사용하였을 경우에 백금과 비슷한 효율을 보였다.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.44-49
• /
• 2007

In the fabrication of dye-sensitized solar cells (DSSCs), carbon counter electrode has been tested for replacing the platinum counter electrode which has two drawbacks: limited surface area and high material cost. Poor mechanical stability of carbon layer due to weak bonding strength to electrically conductive TCO (transparent conducting oxide) glass substrate is a crucial barrier for practical application of carbon counter electrode. In the present study a carbon counter electrode with high conversion efficiency, comparable to Pt counter electrode, could be fabricated by adaption of a bonding layer between particulate carbon material and TCO substrate.

• Korean Chemical Engineering Research
• /
• 제54권2호
• /
• pp.262-267
• /
• 2016

본 연구에서는 건식플라즈마 환원방법을 이용하여 다중벽 탄소나노튜브(MWNT) 코팅 층 위에 백금, 금, 백금/금 이종 나노입자를 쉽고 균일하게 고정화 시킬 수 있는 방법을 제시한다. 나노입자는 다중벽 탄소나노튜브 위에 안정적이고 균일하게 고정화되어 나노하이브리드 소재가 되며, 이렇게 합성된 나노하이브리드 소재는 염료감응형 태양전지의 상대전극에 적용된다. CV, EIS, Tafel 측정을 통해 준비된 상대전극의 전기화학적 특성을 분석한 결과, PtAu alloy/MWNT 상대전극이 가장 높은 전기화학적 촉매 활성과 전기 전도도를 보여준다. PtAu alloy/MWNT 상대전극을 이용한 염료감응형 태양전지는 7.9%의 에너지 변환 효율을 보임으로써 MWNT (2.6%), AuNP/MWNT (2.7%) 그리고 PtNP/MWNT (7.5%) 상대전극을 사용한 염료감응형 태양전지의 효율과 비교하였을 때, 가장 높은 효율을 보여주고 있다.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.910-914
• /
• 2007

Recently, a study on the energy conversion efficiency and up sizing' technology of dye-sensitized solar cell (DSC) which is focused in considering a new alternative solar cell has been executed. But consideration for the cell characteristics about an internal electronic flow on a large-scaled DSC has not been carried out yet. In this study, we have chosen a solar cell width as a variable of a large-scaled DSCs and confirmed electric characteristics of an individual cell. First, Pt counter electrode surface of DSC is deposited by RF sputtering methode and the electrochemical properties of Pt electrodes was investigated by cyclic -voltammetry. With the Pt electrode, we fabricated DSC samples of different width. As a result, the higher the internal resistance of DSC becomes, the wider the width gets. Internal resistance makes it difficult to collect photoelectron generated from dye. Ultimately up sizing DSC causes the increase of internal resistance and then has a bad effect on the cell characteristics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.276.2-276.2
• /
• 2016

Dye-sensitized solar cells (DSCs) are promising candidates for light-to-energy conversion devices due to their low-cost, easy fabrication and relative high conversion efficiency. An important component of DSCs is counter electrode (CE) collect electrons from external circuit and reduct I3- to I-. The conventional CEs are thermally decomposed Pt on fluorine-doped tin oxide (FTO) glass substrates, which have shown excellent performance and stability. However, Pt is not suitable in terms of cost effect. In this report, we demonstrated that nickel sulfide thin films by atomic layer deposition (ALD)-using Nickel(1-dimethylamino-2-methyl-2-butanolate)2 and hydrogen sulfide at low temperatures of $90-200^{\circ}C$-could be good CEs in DSCs. Notably, ALD allows the thin films to grow with good reproducibility, precise thickness control and excellent conformality at the angstrom or monolayer level. The nickel sulfide films were characterized using X-ray photoelectron spectroscopy, scanning electron microscopy, X-ray diffraction, hall measurements and cyclic voltammetry. The ALD grown nickel sulfide thin films showed high catalytic activity for the reduction of I3- to I- in DSC. The DSCs with the ALD-grown nickel sulfide thin films as CEs showed the solar cell efficiency of 7.12% which is comparable to that of the DSC with conventional Pt coated counter electrode (7.63%).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.244.2-244.2
• /
• 2015

염료감응형 태양전지(DSSC)는 친환경성과 저렴한 제조공정이 장점으로 최근에 많은 관심을 받고 있다. 현재에는 DSSC를 다양한 반도체 나노입자를 염료에 흡착시키거나, 무반사 코팅등 광학적인 접근을 통해 효율을 증가시키려는 실험이 활발히 진행되고 있다. 다른 한편으로는 DSSC의 효율을 떨어뜨리지 않으면서 DSSC의 장점인 저렴한 제조단가를 더 줄이는 연구가 진행되고 있다. 본 연구에서는 DSSC의 재료물질 중 가장 비싼 편인 Pt 박막을 다른 물질로 대체하기 위해, 몇 가지 공정을 거쳐 추출한 carbon을 사용하였다. 전형적인 DSSC 제작을 위해, FTO glass와 TiO2, 액체전해질을 사용하였고, 제작된 carbon 물질을 solvent에 섞은 뒤 counter electrode에 닥터 블레이드 방식으로 바르고 열처리하였다. 제작된 carbon을 분석하기 위해서 scanning electron microscope (SEM)과 X-ray diffraction (XRD)를 사용하였으며, counter electrode에 carbon을 사용한 DSSC는 Pt 박막을 사용한 일반적인 DSSC와 비교하였을 시에 만족할 만한 효율을 보이는 것을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.615-616
• /
• 2005

Carbon Nanotubes (CNT) on flexible indium tin oxide (ITO) PET films were prepared for dye-sensitized solar cell (DSSC). These CNTs were prepared by spray coating method for various amount of light transparency. Also, Pt counter electrode was prepared by electro deposition method. All $TiO_2$ electrodes were deposited on ITO-PET films by spray coating method. Micro structural images show that CNT counter electrodes prepared by spray-coating have more dense structure with increasing spraying time (0 to 60 seconds). DSSC consisting of $TiO_2$ electrode and CNT counter electrode was fabricated with various amount of light absorption. DSSC have higher light energy conversion efficiency with increasing the thickness of CNT counter electrode. CNT counter electrode is at least compatible to that of CNT counter electrode.

• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.243-247
• /
• 2012

A ruthenium (Ru) catalytic layer and a conventional Pt layer were assessed as counter electrodes (CE) for dye sensitized solar cells (DSSCs). Ru films with different thicknesses of 34, 46, and 90 nm were deposited by atomic layer deposition (ALD). Pt layers with the same thicknesses were prepared by sputtering. $0.45cm^2$ DSSCs were prepared and their properties were characterized by FE-SEM, cyclic voltammetry (CV), impedance spectroscopy (EIS), and current-voltage (I-V). FE-SEM revealed that the crystallized Ru films and Pt films had been deposited quite conformally. CV showed that the catalytic activity of Pt was much greater than that of Ru. In addition, although the catalytic activity of Pt did not depend on the thickness, that of Ru showed an increase with increasing thickness. Impedance analysis revealed high charge transfer resistance at the Ru interface and a decrease with increasing Ru thickness, whereas Pt showed low resistance with no thickness dependence. Despite the relatively small catalytic activity of Ru, the I-V result revealed the average energy conversion efficiency of Ru and Pt to be 2.98% and 6.57%, respectively. These results suggest that Ru can be used as counter electrodes in DSSCs due to its extremely low temperature process compatibility.