• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.221-225
• /
• 2003

The MFIS-FET(Field Effect Transistor) devices using $BLT/Y_2O_3$ buffer layer on p-Si(100) substrates were fabricated by the Sol-Gel method and conventional memory processes. The crystal structure, morphologies and electrical properties of prepared devices were investigated by using various measuring techniques. From the C-V(capacitance-voltage) data at 5V, the memory window voltage of the $Pt/BLT/Y_2O_3/si$ structure decreased from 1.4V to 0.6V with increasing the annealing temperature from $700^{\circ}C\;to\;750^{\circ}C$. The drain current (Ic) as a function of gate voltages $(V_G)$ for the $MFIS(Pt/BLT/Y_2O_3/Si(100))-FET$ devices at gate voltages $(V_G)$ of 3V, 4V and 5V, the memory window voltages increased from 0.3V to 0.8V as $V_G$ increased from 3V to 5V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.897-900
• /
• 2000

Annealing dependencies of the fatigue properties of SrBi$_2$Ta$_2$$O_{9}$ thin films were observed as function of substrate temperature(400-50$0^{\circ}C$) by the rf magnetron sputtering method. With increasing annealing temperature from $600^{\circ}C$ to 85$0^{\circ}C$, flourite phase was crystalized to $650^{\circ}C$ and Bi-layered perovskite phase was crystalized above $700^{\circ}C$. The fatigue characteristics of SBT thin films deposited on Pt/TiO$_2$/SiO$_2$/Si substrate did not change up to 101o switching cycles.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.191-191
• /
• 2009

$Bi_4Ti_3O_{12}$ (BiT) thin films were well developed on the Pt/Ti/$SiO_2/Si$ substrate by a metal organic decomposition (MOD) method. Oxygen was effective on the crystallization of the BiT thin films during a rapid thermal annealing process. The electrical properties of the BiT films dependant on the oxygen partial pressure were investigated. No crystalline phase was observed for the BiT film annealed at $700^{\circ}C$ under oxygen free atmosphere. However, its crystallinity was significantly evolutionned with increasing oxygen partial pressure. In addition, its dielectric and piezoelectric properties were enhanced with increasing oxygen partial pressure to 10 torr. Especially, the BiT film, annealed at $700^{\circ}C$ and 10 torr oxygen pressure, showed good dielectric properties: dielectric constant of 51 and dielectric loss of 0.2 % at 100 kHz. Its leakage current and piezoelectric constant ($d_{33}$) was also considerably improved, being as 0.62 nA/$cm^2$ at 1 V and approximately 51 pm/V, respectively.

• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.290-296
• /
• 2009

$Bi_{4}Ti_{3}O_{12}$ (BiT) thin films were grown on the Pt/Ti/$SiO_2$/si substrate using a metal organic decomposition (MOD) method. Effects of oxygen annealing on the structural properties and dielectric properties of the BiT thin films were investigated. The BiT films were well developed when rapid thermal annealed at $>500^{\circ}C$ in oxygen ambient. For the film annealed at $700^{\circ}C$, no crystalline phase was observed under oxygen free annealing atmosphere while its crystallinity was significantly enhanced as the oxygen pressure increased. The BiT film also exhibited a smooth surface with defect free grains. A high dielectric constant and a low dielectric loss were achieved satisfactory in the frequency range from 75 kHz to 1 MHz. Especially, the BiT film, annealed at $700^{\circ}C$ and 10 torr oxygen pressure, showed good dielectric properties: dielectric constant of 51 and dielectric loss of 0.2 % at 100 kHz. Its leakage current was also considerably improved, being as $0.62\;nA/cm^2$ at 1 V. Therefore, it is considered that the oxygen annealing has effects on an enhancement of crystallinity and dielectric properties of the BiT films.

• 한국재료학회지
• /
• 제11권8호
• /
• pp.671-678
• /
• 2001

$RuO_2$ 박막을 전극으로 하여 Pt/Ti/Si 기판 위에 $RuO_2$ /LiPON/$RuO_2$의 다층 구조로 이루어진 전고상의 박막형 마이크로 슈퍼캐패시터를 제작하였다. 전극용 $RuO_2$박막은 반응성 dc 마그네트론 스퍼터를 이용하여 $O_2$/[Ar+$O_2$]비를 증가시키며 성장시켰고, 비정질 LiPON 고체전해질 박막은 순수한 질소분위기 하에서 rf 스퍼터링으로 성장시켰다. 상온에서의 충-방전 측정을 통해 $RuO_2$ 박막의 미세구조에 따라 슈퍼캐패시터의 사이클 특성이 영향을 받는 것을 알 수 있었다. Glancing angle x-ray diffraction(GXRD)과 transmission electron microscopy (TEM) 분석을 통해 산소 유량의 증가가 $RuO_2$박막의 미세 구조의 영향을 주는 것을 알 수 있었고, X-ray photoelectron spectroscopy (XPS) 분석을 통해 산소 유량 비의 증가가 Ru과 산소간의 결합에도 영향을 줌을 알 수 있었다. 또한 사이클 후 슈퍼캐패시터의 TEM 및 AES depth profiling 분석을 통해, 충-방전 시 $RuO_2$와 LiPON과의 계면반응에 의해 형성된 계면 층이 사이클 특성에 영향을 줌을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.92-95
• /
• 2000

The $(Sr_{1-x}Ca_x)TiO_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained at SCT15 thin film. The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The dielectric constant changes almost linearly in temperature ranges of -80~+90$[^{\circ}C]$. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 200[kHz].

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권10호
• /
• pp.559-563
• /
• 2000

The $(Sr_{1-x}Ca_x)TiO_3(SCT)$ thin films are deposited on Pt-coated(Pt/TiN/$SiO_2$/Si) using RF sputtering method with substitutional contents of Ca. The maximum grain of thin films is obtained by substitution of Ca at 15[mol%]. Also the composition of SCT thin films were closed to stoichiometry(1.081∼1.117 in A/B/ ratio). The dielectric constant was increased with increasing the substitutional contents of Ca, while it was decreased if the substitutional contents of Ca exceeded over 15[mol%]. The dielectric constant changes almost linearly in temperature ranges of -80∼+90[^${\circ}C$]. The temperature properties of the dielectric loss have a stable value within 0.02 independent of the substitutional contents of Ca. All SCT thin films used in this study show the phenomena of dielectric relaxation with the increase of frequency, and the relaxation frequency is observed above 2000[kHz]. The current-voltage characteristics of SCT15 thin films showed the increasing leakage current as the measuring temperature increase.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.71-79
• /
• 1985

In order to fabricate the translucent electrooptic ceramics which are comparable to PLZT, $PNZT^*$ has been prepared from aqueous solutions of their itrate and chlorides. In the quarternary $Pb^{1-x} Nd_x(Zr_{0.63} Ti_{0.37})^{1-\frac{x}{4}O_3$, (PNZT) $(0.02\le x\ge 0.12)$ system cold-pressed PNZT slugs were sintered in $O_2$ in pt-crucible for 45 min. at 118$0^{\circ}C$ and were then heat-treated in air for 60 hrs. at 120$0^{\circ}C$ in Al2O3 crucibles containing $PbZrO_3$ powder to control the atmosphere. Mean particle size of calcined PNZT powders was 0.1~0.15${\mu}{\textrm}{m}$. It was found that the maximum value of optical transmission has been revealed at 6~8 at. % $Nd_2O_3$ added body and that their dielectric constant has been decreased as the frequency increased. Curic temperature has been varied inversely with $Nd^{3+}$ ion content up to 8 at. % and become constant above this value. $^*Pb_{1-x}Nd_x(Zr_{0.63} Ti_{0.37})_{1-2/4}O_3$

• 한국진공학회지
• /
• 제13권4호
• /
• pp.145-149
• /
• 2004

RF magnetron sputtering 방법으로 miscut된 기판을 이용해서 양질의 압전 산화물 에피 박막을 제작하였다. 박막은 (001) $SrTiO_3$ 기판 위에 증착되었으며, (100) 방향으로 $0^{\circ}$-$8^{\circ}$의 miscut 각도를 갖는 기판들을 사용했다. $4^{\circ}$이상의 큰 miscut 각도를 갖는 기판 위에 성장된 박막의 경우, x-ray diffraction (XRD) 패턴은 perovskite 상의 순수한 PMN-PT 피크만을 보여 주었으며, wavelength dispersive x-ray fluorescence spectroscopy를 이용해서 분석한 조성비는 stoichiometric한 조성비에 가까운 값을 보여주었다. 반면에, miscut 각도가 없는 기판 위에 증착된 박막의 경우, 2차상인 pyrochlore 상을 포함하는 XRD 패턴을 보여주었다. $8^{\circ}$ 기판 위에 성장된 박막의 경우 실온에서 20$\mu$C/$\textrm{cm}^2$라는 높은 잔류분극 값을 보여주었다

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.265-271
• /
• 2003

Ferroelectric lanthanum-substituted Bi$_4$Ti$_3$O$_{12}$(BLT) thin films were fabricated by spin-coating onto a Pt/Ti/SiO$_2$/Si substrate by metalorganic decomposition technique. The grain size in BLT thin films were prepared with controlled by various drying process. The effect of grain size on the crystallization and ferroelectric properties were investigated by x-ray diffraction and field emission scanning electron microscope. The dependence of crystallization and electrical properties are related to the grain size in BLT thin films with different drying temperature. The remanent polarization of BLT thin film increases with the increasing grain size. The value of 2P$_{r}$ and E$_{c}$ of BLT thin film dried at 45$0^{\circ}C$ were 25.9 $\mu$C/$\textrm{cm}^2$ and 85 kV/cm, respectively. The BLT thin film with larger grain size has better fatigue properties. The fatigue properties revealed that small grained film showed more degradation of switching charge than large grained films.lms.s.