• 제목/요약/키워드: Pruning product

검색결과 11건 처리시간 0.126초

두릅나무 전정에 따른 연차별 새순 생산성 비교 (Effect of Pruning on Annual Aralia elata Shoot Production)

  • 서지애;신한나;박윤미;이욱
    • 한국산림과학회지
    • /
    • 제111권4호
    • /
    • pp.644-650
    • /
    • 2022
  • 두릅나무는 두릅나무과에 속하는 낙엽활엽관목으로 전국에서 재배되고 있는 고소득 작목이다. 재배의 효율성 제고 및 소득 증대를 위하여 두릅나무의 새순 수확 후 전정 시기 및 연차별 전정에 따른 생산성을 분석하였다. 두릅나무 새순 수확 직후 6일 뒤부터 2주 간격으로 5회 전정하여 최적 시기를 판단하였다. 또한 전정 효과를 규명하기 위하여 정식 후 1년 차에 지상에서 30 cm 높이로 전정하였다. 정식 후 2년 차부터 전년도 발생한 가지를 10 cm 남기고 전정하였으며, 연차별 새순 및 가지 발생 특성을 비교하였다. 그 결과 새순 수확 종료 후 6일이 지난 뒤 처음 전정한 두릅나무의 가지 수가 다른 시기보다 1.3-2.1배 많았다. 새순 특성 또한 다른 시기보다 1.2-1.7배 우수하였으며, 전정이 빠를수록 품질이 좋은 많은 양의 새순을 수확할 수 있었다. 연차별 두릅나무의 전정을 통하여 정식 후 2년 차부터 고품질의 새순(직경 약 1.5 cm, 길이 약 16 cm)을 생산할 수 있었으며, 새순 수확이 가능한 가지 발생을 유도하여 생산성을 높일 수 있었다. 또한, 연차별 전정을 통하여 새순 수확이 쉬운 150 cm 정도의 수고를 유지 시킬 수 있었다. 그 결과 두릅나무의 전정 작업은 새순 수확 후 6일 전후로 빠른 시기에 시행하는 것이 효율적이다. 또한 전정하게 되면 매년 균일한 품질의 새순을 생산할 수 있고, 본당 수확량을 증가시킬 수 있다.

BAYESIAN CLASSIFICATION AND FREQUENT PATTERN MINING FOR APPLYING INTRUSION DETECTION

  • Lee, Heon-Gyu;Noh, Ki-Yong;Ryu, Keun-Ho
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
    • /
    • pp.713-716
    • /
    • 2005
  • In this paper, in order to identify and recognize attack patterns, we propose a Bayesian classification using frequent patterns. In theory, Bayesian classifiers guarantee the minimum error rate compared to all other classifiers. However, in practice this is not always the case owing to inaccuracies in the unrealistic assumption{ class conditional independence) made for its use. Our method addresses the problem of attribute dependence by discovering frequent patterns. It generates frequent patterns using an efficient FP-growth approach. Since the volume of patterns produced can be large, we propose a pruning technique for selection only interesting patterns. Also, this method estimates the probability of a new case using different product approximations, where each product approximation assumes different independence of the attributes. Our experiments show that the proposed classifier achieves higher accuracy and is more efficient than other classifiers.

  • PDF

한국형 컨테이너 조경수 생산기술로서 컨테이너 모듈의 성능 평가 (A Study for the Evaluation of Container Modules; The Technology of Korean Container Tree Production Model)

  • 정용조;임병을;오장근
    • 한국조경학회지
    • /
    • 제44권5호
    • /
    • pp.59-67
    • /
    • 2016
  • 공공기관의 조경공사 설계시에는 일반적으로 조달청에서 고시하는 조경수목 가격을 반영하나, 수목 식재시 조달청에서 정한 세근발달 재배품이라는 규정이 거의 준수되지 않고 있는 실정이다. 규정을 준수하면서 하자율을 줄일 수 있는 조경수 생산의 신기술, 신제품인 지중 매립형 컨테이너 모듈의 성능을 평가하기 위하여 단근 후 3개월간의 세근 발생밀도, 세근발달 길이 및 굴취시 세근 유지율, 수목의 생육 지장 여부에 대하여 일반노지 단근과 컨테이너 용기 지상재배와 비교 연구하였으며, 그 결과는 다음과 같다. 첫째, 세근 발생의 밀도는 컨테이너 모듈을 사용한 조경수에서는 88%로 매우 높게 나타났으며, 일반 노지 단근은 64%로 상대적으로 낮았고, 컨테이너 용기를 이용한 지상재배 조경수는 고사하여 측정의 의미가 없었다. 둘째, 조경수의 세근발달과 세근 유지율은 컨테이너 모듈의 경우, 평균 길이는 10.4cm, 세근 유지율은 100%로서 굴취에 의한 세근의 손상은 없었으며, 노지 단근의 경우 평균 길이는 25.6cm, 세근 유지율은 56%로 컨테이너 모듈의 절반 수준으로 훼손이 큰 것으로 나타났다. 컨테이너 용기 조경수의 세근발달은 전혀 이루어지지 않았다. 셋째, 컨테이너 모듈과 일반 노지 단근의 경우, 단근 작업에 따른 수목의 고사 또는 왜소엽 등의 지장이 전혀 없었다. 반면에 컨테이너 용기의 경우, 거의 전량이 고사하여 수목생육에 지장이 심각한 것으로 확인되었다. 이상에서, 지중매립형 컨테이너 모듈의 성능을 평가해 본 결과, 세 가지 모델 중 가장 우수한 것으로 확인되었으며, 컨테이너 모듈이 여름철 부적기 식재나 생육조건이 불리한 환경에서 수목의 빠른 초기 활착을 유도함으로써 하자를 예방하고, 조달청 규정 등에서 제시하고 있는 원칙을 준수할 수 있는 최적의 대안이 될 수 있을 것으로 기대한다.

Splitting Algorithm Using Total Information Gain for a Market Segmentation Problem

  • Kim, Jae-Kyeong;Kim, Chang-Kwon;Kim, Soung-Hie
    • 한국경영과학회지
    • /
    • 제18권2호
    • /
    • pp.183-203
    • /
    • 1993
  • One of the most difficult and time-consuming stages in the development of the knowledge-based system is a knowledge acquisition. A splitting algorithm is developed to infer a rule-tree which can be converted to a rule-typed knowledge. A market segmentation may be performed in order to establish market strategy suitable to each market segment. As the sales data of a product market is probabilistic and noisy, it becomes necessary to prune the rule-tree-at an acceptable level while generating a rule-tree. A splitting algorithm is developed using the pruning measure based on a total amount of information gain and the measure of existing algorithms. A user can easily adjust the size of the resulting rule-tree according to his(her) preferences and problem domains. The algorithm is applied to a market segmentation problem of a medium-large computer market. The algorithm is illustrated step by step with a sales data of a computer market and is analyzed.

  • PDF

가변성 결정기반 BPM 생성을 위한 가변성 의존관계 분석 (Variability Dependency Analysis for Generating Business Process Models based on Variability Decisions)

  • 문미경
    • 정보처리학회논문지D
    • /
    • 제16D권5호
    • /
    • pp.791-800
    • /
    • 2009
  • 최근 서비스 지향 아키텍처 (Service Oriented Architecture SOA) 기반의 애플리케이션 개발에 맞게 비즈니스 프로세스의 유연성을 확보하고 재사용을 증진시키기 위하여 비즈니스 프로세스 패밀리 모델 (Business Process Family Model: BPFM)이 제시되었다. BPFM은 소프트웨어 프로덕트 라인 방법의 가변성 분석 기법을 사용하여 비즈니스 프로세스 군 (family)에서 나타날 수 있는 가변성을 분석하여 이를 명시적으로 표현하고 있는 모델이다. BPFM으로부터 여러 개의 비즈니스 프로세스 모델 (Business Process Model: BPM)을 개발하기 위해서는 가변성 결정 및 가지치기(Decision and Pruning) 과정을 거쳐야 한다. 이 때 가변성 사이에는 서로 협력적 또는 배타적인 관계를 가질 수 있고 이는 가변성 결정과 가지치기에 영향을 미치게 되는데, 현재 제시된 BPFM에는 이러한 바인딩 정보에 대해서 고려하지 않고 있다. 본 논문에서는 비즈니스 프로세스 군에서 식별될 수 있는 가변성들 사이의 의존관계 유형을 분석하고 이러한 가변성 정보를 독립된 의존관계 분석모델로 표현하는 방법을 제시한다. 또한 추출된 모델을 기반으로 하나의 가변성 결정으로부터 영향을 받는 다른 가변성들을 추적하여 선결정 처리 할 수 있는 방법을 제공한다. 본 방법을 이용함으로써 가변성 결정회수를 줄일 수 있고, 또한 잘못된 가변성 결정으로 인한 BPM의 기능 불일치를 해소할 수 있음을 사례연구를 통해 보인다.

비즈니스 프로세스 패밀리 모델을 위한 가변성 분석 방법 (Variability Analysis Approach for Business Process Family Models)

  • 문미경;염근혁
    • 정보처리학회논문지D
    • /
    • 제15D권5호
    • /
    • pp.621-628
    • /
    • 2008
  • 오늘날 대부분의 기업들은 외부상황에 신속하게 비즈니스를 바꿀 수 있도록 하는 온디맨드 비즈니스 (On-demand business)를 구현하기 위해 IT 시스템의 유연성을 필요로 한다. 서비스 지향 아키텍처(Service Oriented Architecture: SOA)는 온디맨드 운영환경에서의 비즈니스 유연성을 가능하게 하는 인프라스트럭처 (infrastructure)를 제공한다. 오늘날의 이러한 요구사항을 충족시키기 위하여 SOA 애플리케이션 개발에 맞게 비즈니스 프로세스의 유연성을 확보하고 재사용을 증진시키기 위한 접근법이 필요하다. 그러므로 본 논문에서는 소프트웨어 프로덕트 라인 방법의 가변성 분석 기법을 사용하여 비즈니스 프로세스 패밀리 (family)에서 나타날 수 있는 가변성을 분석하고 이를 명시적으로 비즈니스 프로세스 패밀리 모델 (Business Process Family Model: BPFM)로 표현하는 방법을 제시한다. 또한 이 방법의 사용을 지원하기 위해 개발한 도구에 대해 설명한다. 이는 BPFM을 모델링하고 BPFM으로부터 가변성 결정과 가지치기 과정을 거쳐 자동 비즈니스 프로세스 모델 (Business Process Model: BPM)을 생성하는 기능들을 가지고 있다. 본 논문에서 제시하는 비즈니스 프로세스 패밀리의 가변성 분석을 통하여 비즈니스와 이를 지원하는 IT 시스템은 비즈니스 환경의 변화에 신속하게 대응할 수 있게 된다.

뽕나무 유전자원의 항산화능 비교 (Anti-oxidative capacity of mulberry genetic resources)

  • 김현복;석영식;서상덕;성규병;김성국;조유영;권해용;이광길
    • 한국잠사곤충학회지
    • /
    • 제53권2호
    • /
    • pp.71-77
    • /
    • 2015
  • Much attention has been focused on the activity of the natural antioxidants present in fruits and vegetables, because potentially these components may reduce the level of oxidative stress. Especially, mulberry leaves containing many natural components are considerable resource for natural antioxidants. The antioxidant capacity of mulberry leaves was investigated with minilum L-100 device and ARAW-KIT (anti-radical ability of water-soluble substance), in comparison to the ascorbic acid. The antioxidant capacity of 16 varieties was 3303.4 nmol at opening stage of five leaves in spring. The highest stage of antioxidant capacity (3708.0 nmol) and yield rate was just before the coloration stage with anthocyanin in fruits, whereas the lowest stage was middle of June (2231.6 nmol) and about two months growing stage after summer pruning (2064.6 nmol). But after summer pruning, the antioxidant capacity of mulberry leaves increased gradually until just before fallen leaves stage. Even if samples were same variety, antioxidant effect of those showed different results according to collected regions. Also, antioxidant effect of mulberry leaves were higher than that of branches. The antioxidant capacity of yield-type mulberry leaves and fruits (Morus alba L., M. bombycis Koidz, and M. Lhou (Ser.) Koidz) collected from In-je, Won-ju and Yang-yang regions, Kang-won province, Korea, was investigated. The results indicated that total antioxidant capacity of yield-type mulberry leaves was 2711.2 nmol. In the antioxidant capacity analysis of Jeollabuk-Do genetic resources, autumn's mulberry leaves showed higher antioxidant capacity than that of spring's it. To investigate the effect of tea on antioxidative capacity, five kinds of tea(coffee mix, green tea added brown rice, mulberry leaf tea, Polygonatum odoratum tea and black tea added lemon) were selected and analyzed. Their's anti-oxidative capacity were 2,531.01 nmol, 1,867.42 nmol, 1,053.72 nmol, 292.71 nmol and 188.91 nmol, respectively. The antioxidative capacity of drinking water soaked with mulberry leaf showed 891.96 nmol.

국내 자생 고로쇠 (Acer mono Max.) 추출물의 항산화 활성 (Antioxidant Activity of the Extracts Derived from Korean Native Acer mono Max.)

  • 설은경;조춘구;류희욱
    • KSBB Journal
    • /
    • 제32권2호
    • /
    • pp.117-123
    • /
    • 2017
  • Maple tree is a useful medical plant for obtaining bioactive materials such as pharmaceutics, cosmetics, food additive, etc., and there are 16 species of native maple trees in Korea. In this study, we evaluated the antioxidant activity of sap and crude extracts of Acer mono Max, a representative maple species. The crude extracts were obtained by solvent extraction (water, ethanol, and ethyl acetate) from its branches (bark and xylem). The phenolic contents and radical scavenging capacities of the extracts and the sap were evaluated in terms of half maximal effective concentration ($EC_{50}$) and kinetics by 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. The ethanol extracts showed the highest extraction yield, phenolic contents and antioxidant activity, and bark extracts showed better antioxidant activity than xylem extracts. The antioxidant activity of the sap was very low, but the $EC_{50}$ of ethanol and ethyl acetate extracts ranged from 68 to $79{\mu}g/mL$, similar to that ($60{\mu}g/mL$) of the control, butylated hydroxytoluene (BHT). The DPPH radical scavenging rate ($220{\sim}760{\mu}M/min$) and the second-order reaction rate constant ($6.48{\sim}7.04L/g{\cdot}min$) of these extracts were better than those of BHT ($55{\sim}370{\mu}M/min$ and $3.60L/g{\cdot}min$). These results suggest that A. mono Max. is one of the useful bioresources for obtaining antioxidant biologically active substances, and it is possible to obtain physiologically active substances from by-product of its pruning while minimizing the effect on the growth of the tree.

여드름 유발균 Propionibacterium acnes에 대한 녹나무과 10종의 항균활성 (Anti-microbial Activities of Ten Lauraceae Species against Propionibacterium acnes)

  • 조주성;지래원;장보국;정헌상;이철희
    • 한국자원식물학회지
    • /
    • 제31권5호
    • /
    • pp.423-432
    • /
    • 2018
  • 본 연구는 녹나무과 10종의 추출물이 Propionibacterium acnes의 억제활성에 미치는 영향을 분석하여 새로운 천연 항균소재를 개발하기위해 수행되었다. 실험재료는 완도와 제주도에서 채집하였으며, 부위(잎, 가지), 용매(증류수, 80% 에탄올, 100% 메탄올) 및 초음파 추출시간(15, 30, 45분)에 따른 조추출물의 항균활성을 agar diffusion method로 조사하였다. 대조구로는 합성항균제인 methylparaben과 phenoxyethanol 0.4, 1, 2, 4 mg/disc를 사용하였다. 연구에 사용된 10종의 모든 추출물에서 억제활성을 보였으며, 여드름균에 대한 항균작용을 확인할 수 있었다. 이 중 월계수는 80% 에탄올에 45분간 추출한 조건에서 20.2 mm의 생육억제환을 나타내어 가장 우수한 여드름균에 대한 항균작용을 확인할 수 있었다. 월계수 잎을 100% 메탄올을 용매로 초음파 30분 추출한 다음n-hexane, chloroform, ethyl acetate, n-butanol 그리고 water 순으로 용매 분획하여 항균활성을 비교분석하였다. 결과, butanol 분획물을 제외한 모든 분획물에서 10.0 mm 이상의 억제환이 형성되었다. 그중 ethyl acetate 분획물에서 억제환이 13.3 mm로 가장 컸으며, 조 추출물(10.2 mm)과 대조구인 phenoxyethanol (12.5 mm)에 비해서도 유의적으로 우수한 억제활성을 나타내었다.

Development of Multi-functional Tele-operative Modular Robotic System For Watermelon Cultivation in Greenhouse

  • H. Hwang;Kim, C. S.;Park, D. Y.
    • Journal of Biosystems Engineering
    • /
    • 제28권6호
    • /
    • pp.517-524
    • /
    • 2003
  • 생물생산에 요구되는 다양한 작업들을 생력화하기 위한 연구 개발 노력이 전세계적으로 활발히 추진되어 왔다. 이러한 연구 개발은 주로 노동집약적인 작업, 고부가가치 농산물을 생산하기 위한 작업 그리고 작업자에 유해한 또는 가혹한 환경하의 작업 등에 주안점을 두고 추진되고 있다. 하지만, 생물생산 분야의 생력화를 추진하는데 있어서 다양한 작업성과 강건성이라는 작업성능 측면에서의 기술적인 문제와 고가의 시스템 및 설비 비용에 따른 경제성 문제가 항상 걸림돌이 되어 왔다. 본 연구에서는 언급한 문제점들 외에 기계가동률, 유지보수 등 생물생산분야의 생력화에 있어 내재되고 있는 문제점들을 효율적으로 해결하기 위하여 무선 원격로봇 시스템에 의거한 새로운 생력화 개념을 제안하였다. 새로운 개념의 생력화는 주어진 작업을 성공적으로 수행하기 위하여 작업자(농민), 컴퓨터 그리고 로봇을 위시한 자동화 작업설비를 대상으로 상대적으로 수월성을 갖는 기능을 중심으로 역할을 분담하는 것이다. 또한 시설재배에 요구되는 전정, 관수, 방제, 제초, 수확, 운반 등과 같은 다양한 작업들을 노동 투하정도와 기능적 유사성 측면을 고려하여 일관적으로 작업을 생력화하는 방안을 제시하였고 제안한 개념을 구현할 수 있는 시스템을 개발하였다. 대상 작목으로는 중량으로 인하여 비교적 취급이 어려운 수박을 선택하였다. 개발 시스템은 크게 무선원격 모니터링 및 작업제어 모듈, 무선원격 영상 획득 및 데이터 송수신 모듈, 4자유도 직교좌표형 로봇 암을 장착한 갠트리 장치부, 교체가 가능한 모듈형 선단 작업장치, 수박 운반 적재모듈의 5개 하드웨어 모듈로 구성하였다. 개발한 시스템은 그래픽 사용자 인터페이스를 통하여 터치 스크린 모니터를 이용하여 작업자와 컴퓨터간의 인터페이스를 구현하였으며 무선 원격데이타 송수신과 분산 제어기를 이용하여 작업자와 컴퓨터 그리고 로봇 작업기간의 인터페이스와 시스템 제어를 구현하였다. 개발 시스템의 성능을 시험하여 결과를 제시하였으며 본 논문에서 제안한 새로운 개념의 생력화 시스템은 생물생산분야의 생력화 방향을 새롭게 제시하는 실질적이고 실현 가능한 시스템이라는 것을 보여주었다.