• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.6
• /
• pp.513-517
• /
• 2008

Purpose: This study aimed to evaluate distribution and maximal value of mechanical stresses on the reconstruction plate, bridging mandibular symphysis defect, and to optimize the most appropriate locations of the plate to distribute the stress causing the fracture of the plate. Materials and methods: Four types of reconstruction were constructed by different number and location of the reconstruction plates on the 3 D finite element model (FEM) of a human edentulous mandible; Type I: one plate on the inferior border of the anterior mandible, Type II: one plate on the middle of the anterior mandible, Type III: one plate on the superior border of the anterior mandible, and Type IV: two plates on the inferior and superior border of the anterior mandible. Results: The results showed that the maximal stress of type I (234.29 Mpa) was lower than that of type II (260.91 Mpa) and type III (247.37 Mpa), but higher than that of type IV (186.64 Mpa). We could also observe that the stresses are tending to focus on the inner side and inferior part of the plate which connected proximal segment from the vertical load. Conclusions: On the basis of the findings, it was concluded that using a plate on the inferior border of mandible or two plates on the inferior and superior border of mandible are more favorable to distribute mechanical stresses, which could reduce the fracture of the plate.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.5
• /
• pp.427-432
• /
• 2021

Delayed treatment of volar dislocation of the distal radioulnar joint can result in wrist pain, limited rotation of the forearm, and degenerative arthritis that could be managed only by salvage procedures. A 24-year-old male patient presented with wrist pain and a loss of forearm rotation after surgery for a radial shaft fracture. The shaft of the radius was fixed with a plate and screws with a volar angulation of 7°. The ulnar head was dislocated volar to the distal radius, and the bone defect in the ulnar head was impacted into the volar rim of the sigmoid notch of the radius, preventing the head from being reduced in the joint. Corrective osteotomy of the malunited radial shaft and sliding osteotomy of the proximal ulnar head were performed to fill the distal bone defect. Pain and range of the forearm rotation were improved at postoperative 19 months.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2007

The purpose of this study is to evaluate the effects of surface treatment and composition of reinforcement material on fracture strength of fiber reinforced composite inlay bridges. The materials used for this study were I-beam, U-beam TESCERA ATL system and ONE STEP(Bisco, IL, USA). Two kinds of surface treatments were used; the silane and the sandblast. The specimens were divided into 11 groups through the composition of reinforcing materials and the surface treatments. On the dentiform, supposing the missing of Maxillary second pre-molar and indirect composite inlay bridge cavities on adjacent first pre-molar disto-occlusal cavity, first molar mesio-occlusal cavity was prepared with conventional high-speed inlay bur. The reinforcing materials were placed on the proximal box space and build up the composite inlay bridge consequently. After the curing, specimen was set on the testing die with ZPC. Flexural force was applied with universal testing machine (EZ-tester; Shimadzu, Japan). at a cross-head speed of 1 mm/min until initial crack occurred. The data was analyzed using one-way ANOVA/Scheffes post-hoc test at 95% significance level. Groups using I-beam showed the highest fracture strengths (p<0.05) and there were no significant differences between each surface treatment (p>0.05) Most of the specimens in groups that used reinforcing material showed delamination. 1. The use of I-beam represented highest fracture strengths (p<0.05) 2. In groups only using silane as a surface treatment showed highest fracture strength, but there were no significant differences between other surface treatments (p>0.05). 3. The reinforcing materials affect the fracture strength and pattern of composites inlay bridge. 4 The holes at the U-beam did not increase the fracture strength of composites inlay bridge.

• Archives of Reconstructive Microsurgery
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2015

Free or pedicled vascularized fibular grafts (VFG) are useful for the reconstruction of large skeletal defects, particularly in cases of scarred or avascular beds, or in patients with combined bone and soft tissue defects. Compared to non-VFG, VEG, which contains living osteocytes and osteoblasts, maintains its own viability and serves as good osteoconductive and osteoinductive graft. Due to its many structural and biological advantages, the free fibular osteo- or osteocutaneous graft is considered the most suitable autograft for the reconstruction of long bone defects in the injured extremity. The traditional indication of VFG is the long bone and soft tissue defect, which cannot be reconstructed using a conventional operative method. Recently, the indications have been widely expanded not only for defects of midtibia, humerus, forearm, distal femur, and proximal tibia, but also for the arthrodesis of shoulder and knee joints. Because of its potential to allow further bone growth, free fibular epiphyseal transfer can be used for the hip or for distal radius defects caused by the radical resection of a tumor. The basic anatomy and surgical techniques for harvesting the VFG are well known; however, the condition of the recipient site is different in each case. Therefore, careful preoperative surgical planning should be customized in every patient. In this review, recently expanded surgical indications of VFG and surgical tips based on the author's experiences in the issues of fixation method, one or two staged reconstruction, size mismatching, overcoming the stress fracture, and arthrodesis of shoulder and knee joint using VFG are discussed with the review of literature.

• Archives of Reconstructive Microsurgery
• /
• v.15 no.2
• /
• pp.77-84
• /
• 2006

Purpose: We present clinical usefulness of saphenous neurocutaneous island flap for reconstruction of soft tissue defect of the lower leg, especially anteromedial aspect, including foot and ankle. Materials and Methods: Thirteen cases of soft tissue defects in the lower leg including foot and ankle which were 6 cases of pretibial area, 2 cases of anteromedial aspect of distal two third, 2 cases of ankle, and 3 cases of foot were treated saphenous neurocutaneous island flap. They were proximally based flap 3 cases and distally based flap 10 cases. Clinically the flaps ranged in size from $4{\times}5\;cm$ to $6{\times}12\;cm$. Results: All of the flaps except 1 case survived completely. Three cases, however, had marginal necrosis. One case of flap failure was proximal tibia fracture accompanied with injury of the flap pedicle which was difficult in flap elevation, subsequently. Conclusion: The saphenous neurocutaneous island flap is a simple, reliable procedure with a versatility for soft tissue coverage of the lower leg, especially anteomedial aspect, including foot and ankle. In case of another injuries accompanied near the saphenous nerve, careful attention should be made.

• Journal of the Korean Home Economics Association
• /
• v.29 no.3
• /
• pp.61-69
• /
• 1991

The relationships between nutrients intake, physical activity and bone mineral density were investigated in 19 elderly men aged 71-80 years. A trained nutritionist interviewed usual dietary intake and daily activity with a questionnaire, and bone mineral density was measured at the lumbar spine and three regions of the proximal femur (femur neck, Ward's triangle and trochanter) with a Luna DP3 dual photon absorptiometry. The correlations between dietary calcium intake and bone mineral density at the lumbar spine and trochanteric region were significant at P<0.05 and P<0.01 level respectively. the significant correlations were also found between vitamin A(P<0.005), riboflavin(P<0.01), and ascorbic acid(P<0.05) intake and bone mineral density at these sites. Higher physical activity was associated with greater bone mineral density of four sites, but this was not significant. But there were significant relationships between total energy expenditure and bone mineral density of the lumbar spine(P<0.01), femur neck (P<0.05) and Ward's triangle(P<0.05). In this study the results revealed that bone mineral density of the lumbar spine and trochanteric region were associated with dietary calcium intake. And bone mineral density of the femur neck and Ward's triangle were related to physical activity but not to nutrients intake. In conclusion, dietary calcium intake seems to be a important factor for greater bone mineral density. Further evidence will be needed that physical activity protects against bone fracture and osteoporosis in the edlerly.

• The Korean Journal of Pain
• /
• v.23 no.4
• /
• pp.258-261
• /
• 2010

We report a 66-year-old woman with complex regional pain syndrome (CRPS) 1 treated with combined medical and active physical therapy. She was diagnosed with CRPS 1 following partial shoulder prosthesis due to proximal humerus fracture. Despite continuous medication and physical therapy, there was no improvement in her pain and functional outcome. Her overall pain was decreased by stellate ganglion block 3 times in two weeks conducted during the second month of the follow-up period. Following the ganglion blockades, pain and the other symptoms were decreased intermittently but range of motion (ROM) and functional status were not satisfied as much as expected. After the third month of follow-up, her passive and active ROM of the shoulder joint was increased after application of manipulation under general anesthesia. In conclusion, because CRPS 1 remains one of the most difficult pain syndromes, early diagnosis and treatment are important to have adequate functional results from physical therapy. Manipulation under general anesthesia may be an additional effective treatment tool to obtain functional improvement in some patients diagnosed with CRPS 1.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.2
• /
• pp.39-42
• /
• 2023

A ruptured Achilles tendon at the calcaneus attachment, which does not include a bone that can be fixed, is called 'sleeve avulsion'. A small amount of tendon in the calcaneal region can be sutured to the proximal portion of the ruptured Achilles tendon or insufficient bone to be fixed. Hence, tendon-bone healing is expected, but the results are not good compared to other parts of the tear. The incidence of Achilles tendon rupture is 7 to 40 per 100,000 patients, and 25% of patients undergo direct suture or reconstruction surgery, and 7.6% of patients with sleeve avulsion injuries undergo surgery. Surgical treatment may be a better choice for Achilles tendon sleeve avulsion because no successful case of conservative treatment has been reported. Distal wounds above the ruptured tendon adjacent to the bony eminence can have wound healing problems because of the thin, soft tissue and hypovascularity. An appropriate surgical method must be selected for each patient.

• Clinical Pain
• /
• v.18 no.2
• /
• pp.107-110
• /
• 2019

Flexor carpi radialis (FCR) muscle is located in the forearm anteriorly that runs through a synovial fibro-osseous tunnel in the forearm. We described a case of FCR tendon rupture due to repetitive overuse injury. A 55-year-old man, right-hand dominant, presented with right forearm pain and swelling which started 3 days ago while playing amateur golf. Focal tenderness and bruising over volo-ulnar region of the right forearm were examined. Plain radiographs showed soft tissue edema around lesion area and no detectable fracture. Ultrasonography showed multiple hypoechoic lesions suspected as hematoma of the flexor muscle group. After done magnetic resonance imaging, he was diagnosed with rupture of FCR tendon at proximal origin and strain of flexor digitorum superficialis and palmaris longus muscle. He received compressive dressing and restriction of wrist range of motion for three weeks. Two months later, remaining traces of lesions were observed at the follow-up ultrasonography and the pain disappeared.

• Journal of Veterinary Clinics
• /
• v.41 no.2
• /
• pp.139-142
• /
• 2024

A wild Whooper swan (Cygnus Cygnus) with limping due to an injured left pelvic limb in an accident was rescued on the seashore and transferred to the Jeju Wildlife Rescue Center on November 23rd, 2020. On physical examination, its body condition score was 1 out of 5 due to starvation and dehydration. The left coxofemoral joint was also examined by careful palpating and estimating the damage. Moderated soft tissue swelling and crepitus surrounding the hip joint were confirmed. Radiography and computed tomography (CT) were used together for an accurate diagnosis of the joint. By radiographs readings, it was difficult to accurately confirm the condition of the proximal femur due to superimposition of the synsacrum and internal organs. However, signs such as avulsion fracture of the femoral head and a few fragments around the joint were revealed by CT imaging. Besides, through three-dimensional (3D) image analysis of CT, the dislocated area and condition of the left hip joint could be accurately and easily confirmed. The diagnostic process showing in this paper could be used as a good reference for diagnosing coxofemoral joint luxation in wild swan.