• 제목/요약/키워드: Prototype Energy

검색결과 898건 처리시간 0.028초

Influence of design modification of control rod assembly for Prototype Generation IV Sodium-cooled Fast Reactor on drop performance

  • Son, Jin Gwan;Lee, Jae Han;Kim, Hoe Woong;Kim, Sung Kyun;Kim, Jong Bum
    • Nuclear Engineering and Technology
    • /
    • 제51권3호
    • /
    • pp.922-929
    • /
    • 2019
  • This paper presents the drop performance test of the control rod assembly which is one of the main components strongly related to the safety of the prototype generation IV sodium-cooled fast reactor. To investigate the drop performance, a real-sized control rod assembly that was recently modified based on the drop analysis results was newly fabricated, and several free drop tests under different flow rate conditions were carried out. Then the results were compared with those obtained from the previous tests conducted on the conceptually designed control rod assembly to demonstrate the improvement in performance. Moreover, the drop performance tests under several types and magnitudes of seismic loadings were also conducted to investigate the effect of the seismic loading on the drop performance of the modified control rod assembly. The results showed that the effects of the type and magnitude of the seismic loading on the drop performance of the modified control rod assembly were not significant. Also, the drop time requirement was successfully satisfied, even under the seismic loading conditions.

몬테칼로 전산모사를 이용한 Phoswich 계측기의 비선형성 연구 (A Study on Non-proportionality of Phoswich Detector Using Monte Carlo Simulation)

  • 김재천;김종경;김순영;김용균;이우교
    • Journal of Radiation Protection and Research
    • /
    • 제29권4호
    • /
    • pp.263-268
    • /
    • 2004
  • 한국원자력연구소에서 감마선과 전자를 동시측정하기 위한 목적으로 제작된 Prototype phowich를 이용하여 감마선에 대한 섬광체의 비선형성에 대한 연구를 수행하였다. 제작된 Prototype phoswich는 $2'{\times}2'$ CsI(Tl)와 Plastic scintillator 그리고 하나의 PMT로 구성되어 있다. 몬테칼로 방법을 이용하여 $^{137}Cs$$^{60}Co$ 선원의 Prototype phoswich 계측기의 반응함수(Detector Response Function, 이하 DRF)를 구하였으며 이를 점증하기 위하여 제작된 Prototype phoswich를 이용, 실험을 통하여 DRF를 구한 뒤 비교하였다. 계측기의 DRF를 정확하게 모사하기 위하여 CsI(Tl) 섬광체의 Electron response와 섬광체 내에서의 광전효과를 고려하는 Simplified elec윤on cascade sequence 정보를 이용하여 CsI(Tl) 섬광체의 감마선에 대한 비선형성을 계산하였다. $^{137}Cs$ 선원의 경우 전산모사를 통하여 구한 DRF 결과는 실험값과 비교적 잘 일치함을 알 수 있었으나 $^{60}Co$의 경우에는 선원의 결과와는 달리 전산모사 결과와 실험값에 약간의 차이가 남을 알 수 있었다. 이는 $^{137}Cs$ 선원과는 달리 $^{90}Co$은 1.17 MeV와 1.13 MeV 두 개의 광자를 동시에 방출하기 때문에 동시효과에 의한 불착실성 등이 그 외 다른 불확실성 등과 함께 증폭되어 나타나기 때문이다. 본 연구를 통해 Phoswich내 CsI(Tl)의 감마선 비선형성에 대한 분석을 수행하였으며 이를 통하여 비선형성이 고려된 개선된 Phoswich DRF를 생산하고 이를 실험값과 비교 검증할 수 있었다. 섬광체의 Electron channel운g effect, Doppler broadening effect 및 Transfer resolution 등과 같은 후속연구가 추가된다면 좀더 정확한 Phoswich의 DRF를 전산 모사하는 것이 가능해질 것이다.

실리콘 PIN 다이오드 검출기를 이용한 전자선량계 개발 (Development of Prototype Electronic Dosimeter using the Silicon PIN Diode Detector)

  • 이봉재;김봉환;장시영;김종수
    • Journal of Radiation Protection and Research
    • /
    • 제25권4호
    • /
    • pp.197-205
    • /
    • 2000
  • 실리콘 PIN 다이오드 검출기를 이용하여 전자선량계(PED)를 설계 및 제작하고, 전자신호회로의 성능과 방사선 검출 반응특성을 평가하였다. 전자회로의 성능검사에서는 방사선에 의한 검출기의 신호가 신호처리회로에서 양호하게 출력되었으며, $^{137}Cs$ 감마 방사선을 이용한 방사선조사 시험결과 선량계의 반응도 및 분산계수는 각각 1.85 cps/$Gy{\cdot}h^{-1}$ 및 19.3%로 측정되어 전자선량제의 성능기준을 만족하는 것으로 나타났다. 본 전자선량계의 시작품은 향후 전자회로의 성능향상과 작동 프로그램을 보완 및 개선함으로써 개인 방사선 모니터링에 활용될 것으로 기대된다.

  • PDF

실시설계단계에서 수량산출을 위한 복합벽체 자동분할에 관한 연구 (A Study for Automated Division of Composite Walls for Quantity Take-off in Construction Document Phase)

  • 박승화;김흥수;윤두영
    • 한국CDE학회논문집
    • /
    • 제20권2호
    • /
    • pp.124-132
    • /
    • 2015
  • When Building Information Modeling (BIM) was introduced at the early stage, it was only utilized as a three-dimensional visualization tool. Nowadays, however, BIM is being studied for increasing design productivity and managing enormous information on building life cycle. One of the representative research is developing 'common prototype BIM libraries'. BIM data made of common prototype libraries should be utilized in various ways, quantity takeoff, code checking, energy analysis and so on. However, common prototype BIM libraries are not enough to estimate accurate cost. For example, composite wall libraries should be divided into several single objects, wall structure and finishes, for the quantity takeoff and construction cost calculation. In this paper, we are suggesting an automated division algorithm of composite wall and developing a system prototype for it. This study is expected to reduce extra modeling work and contribute to fast and accurate cost calculation in the construction.

IoT-based low-cost prototype for online monitoring of maximum output power of domestic photovoltaic systems

  • Rouibah, Nassir;Barazane, Linda;Benghanem, Mohamed;Mellit, Adel
    • ETRI Journal
    • /
    • 제43권3호
    • /
    • pp.459-470
    • /
    • 2021
  • This paper presents a low-cost prototype for monitoring online the maximum power produced by a domestic photovoltaic (PV) system using Internet of Things (IoT) technology. The most common tracking algorithms (P&O, InCond, HC, VSS InCond, and FL) were first simulated using MATLAB/Simulink and then implemented in a low-cost microcontroller (Arduino). The current, voltage, load current, load voltage, power at the maximum power point, duty cycle, module temperature, and in-plane solar irradiance are monitored. Using IoT technology, users can check in real time the change in power produced by their installation anywhere and anytime without additional effort or cost. The designed prototype is suitable for domestic PV applications, particularly at remote sites. It can also help users check online whether any abnormality has happened in their system based simply on the variation in the produced maximum power. Experimental results show that the system performs well. Moreover, the prototype is easy to implement, low in cost, saves time, and minimizes human effort. The developed monitoring system could be extended by integrating fault detection and diagnosis algorithms.

한국형 EMS NA Prototype 어플리케이션 개발 (Development of Network Application Softwares for Prototype Korean Energy Management Systems)

  • 윤상윤;이욱화;조윤성;신철호;이진;신만철;김명의;양희성;이병하;허성일;김선구
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.217_218
    • /
    • 2009
  • 본 논문에서는 한국형 에너지관리 시스템(energy management system, EMS)의 프로토타입(prototype) 네트웍 해석 프로그램의 개발에 대해 요약하였다. 2005년부터 수행되어온 한국형 EMS 개발은 2008년 베이스라인(baseline) 개발을 완료한 상태이며 올해부터 프로토타입 개발 및 실증시험을 수행중에 있다. 한국형 EMS 프로토타입 네트웍 해석 소프트웨어는 베이스라인 개발 프로그램의 기능 보강과 더불어 상정사고 해석(contingency analysis), 전압 계획(voltage scheduler) 및 송전가능용량계산(transmission transfer capability)등으로 구성되어 있다. 본 논문에서는 각 개발 프로그램의 개략적 기능을 소개하고 전체적인 프로토타입 시스템의 구성에 대해 요약하였다.

  • PDF

스마트폰을 이용한 스마트 디퓨저의 프로토 타입 모델 설계 및 구현 (Design and Implementation of prototype model of Smart Diffuser using Smart Phone)

  • 최성재
    • 한국인터넷방송통신학회논문지
    • /
    • 제20권4호
    • /
    • pp.149-154
    • /
    • 2020
  • 본 연구에서는 블루투스를 이용하여 스마트폰 으로 제어되는 Smart Diffuser 디바이스의 초기모델을 개발하였다. Smart Diffuser는 디바이스에 주입하는 오일을 분사시키기 위해 초음파 진동자를 이용하였다. 고휘도 LED를 사용하여 오일이 분사되는 동안에 색상 변화가 보여 지도록 디바이스를 개발하였다. 휴대용 디바이스인 점을 감안하여 충전 시간 문제를 해결하기 위해 40mAh의 Li-Po 배터리를 사용하여 장시간 사용할 수 있도록 설계를 하였다. Bluetooth Low Energy를 이용하여 저전력 구동을 구현을 함으로서 초기 설계모델의 유용성에 대해 확인 하였다.

탄소섬유 복합재료를 적용한 ANG 연료용기의 시제작 및 성능평가 (Prototype Product Based on the Functional Test of ANG Fuel Vessel Applied to Composite Carbon Fiber)

  • 김건회
    • 한국기계가공학회지
    • /
    • 제18권3호
    • /
    • pp.7-13
    • /
    • 2019
  • Recently, an automobile market used to natural gas has emerged as fast-growing as the several countries, who holds abundant natural fuel resources, has promoted to supply the national agency for an automobile car. LNG fuel vessel is more efficient in another way as the energy density is high, but it requires a high technology and investment to maintain extreme low temperature. CNG fuel vessel are relatively low-cost alternative to LNG, but poorly economical in terms of energy density as well as showing safety issues associated with compressed pressure. The development of adsorbed natural gas (ANG) has emerged as one of potential solutions. Therefore, it is desirable to reduce the weight of vessel by applying light-weighed a composite carbon fiber in order to response to the regulation of $CO_2$ emission. Herein, this study make the prototype ANG vessel not only based on the optimal design and analysis of material characteristic but also based on the shape design, and it suggest a new type for the composite carbon fiber vessel which verified functional test. Moreover, the detail shape design is analyzed by a finite element analysis, and its verifies the ANG vessel.

도시·주택 적용 미관용 에너지 블록의 발전성능 평가 (Evaluation on the Performance of Power Generation of Energy Harvesting Blocks for Urban and Housing Application)

  • 노명현;김효진;박지영;이상열;조영봉
    • 토지주택연구
    • /
    • 제3권2호
    • /
    • pp.187-193
    • /
    • 2012
  • 최근 에너지 관련 연구분야에서 새롭게 주목받는 것이 주변의 에너지를 수확하는 에너지 하비스팅 기술이다. 본 논문에서는 다양한 에너지 하비스팅 기술들 중 압전 기술과 전자기 유도 방식을 조합한 에너지 블록의 발전성능이 조사되었다. 본 연구의 목적은 개발된 에너지 하비스팅 블록의 주택 도시 분야 적용성을 평가하기 위한 것이다. 이를 위해 본 논문에서는 실험실 규모의 다층 에너지 하비스터의 현 발전수준을 평가하여 제시하였다. 그 다음으로 증폭기술이 적용된 프로토타입의 특징을 설명하고 개발된 프로토타입 모듈의 발전성능을 다각적으로 평가하여 제시하였다. 성능 평가 결과, 개발된 에너지 블록은 기존 상용 제품에 비해서 255%와 505%까지 성능이 향상되었고 그 우수성이 입증되었다. 마지막으로 에너지 하비스팅 블록의 후속 연구 방향을 제시하였다.

한국형 고속전철 경제운전 전략 (Economical run strategy for Korea High Speed Train Prototype)

  • 이태형;박춘수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 춘계학술대회 논문집
    • /
    • pp.1381-1385
    • /
    • 2004
  • This paper presents a modelling methodology using fuzzy logic and train performance simulation for determining an economical running pattern for a high speed train which minimizes energy consumption under an given trip margin. The economical running pattern is defined with an economical maximum speed in traction phase, a speed at the end of coasting. As a case study, the simulation is carried out for an economical run of korea high speed train prototype, and the results of fuzzy model described.

  • PDF