• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.189-196
• /
• 2011

The main issues of the researches are monitoring environment such as weather or temperature variation and natural accident, and sensor gateways which have mobile device, applications for mobile health care. In this paper, we propose the SFMS(Smart Factory Management System) that can effectively monitor and manage a green smart factory area based on M2M service and smart phone with android OS platform. The proposed system is performed based on the TinyOS-based IEEE 802.15.4 protocol stack. To validate system functionality, we built sensor network environments where were equipped with four application sensors such as Temp/Hum, PIR, door, and camera sensor. We also built and tested the SFMS system to provide a novel model for event detection systems with smart phone.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.501-508
• /
• 2012

Reducing carbon dioxide ($CO_2$) exhaust has become a major issue for society in the last few years, especially since the initial release of the Kyoto Protocol in 1997 that strictly limited the emissions of greenhouse gas for each country. One of the primary sectors affecting the levels of atmospheric greenhouse gases is agriculture where $CO_2$ is not only consumed by plants but also produced from various types of soil and agricultural ecosystems including greenhouses. In greenhouse cultivation, $CO_2$ concentration plays an essential role in the photosynthesis process of crops. Optimum control of greenhouse $CO_2$ enrichment based on accurate monitoring of the added $CO_2$ can improve profitability through efficient crop production and reduce environmental impact, compared to traditional management practices. In this study, a sensor-based control system that could estimate the required $CO_2$ concentration considering emission from soil for cucumber greenhouses was developed and evaluated. The relative profitability index (RPI) was defined by the ratio of growth rate to supplied $CO_2$. RPI for a greenhouse controlled at lower set point of $CO_2$ concentration (500 ${\mu}mol{\cdot}mol^{-1}$) was greater than that of greenhouse at higher set point (800 ${\mu}mol{\cdot}mol^{-1}$). Evaluation tests to optimize $CO_2$ enrichment concluded that the developed control system would be applicable not only to minimize over-exhaust of $CO_2$ but also to maintain the crop profitability.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.1-8
• /
• 2018

It is a key role in leading and activating coding education as a process to solve problems creatively to produce and provide the educational contents on the basis of 3D printing. In this paper, we develop a variety of fusion contents to use 3D printing and 8bit MCU base control board which provides specific functions through Arduino. The developed control program conducts various packet monitoring more than ten times per a second, supporting intrinsically full duplex. In addition, communication protocol optimized in conveying a lot of information enables to control different contents. The contents produced with the control board and 3D printing are useful as a programming education tool to train the principle and the concept of coding.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.1-11
• /
• 2008

Wireless Sensor Networks is applied to improvement of life convenience or service like U-City as well as environment pollution, tunnel and structural health monitoring, storm, and earthquake diagnostic system. To increase the usability of sensor data and applicability, mobile devices and their facilities allow the applications of sensor networks to give mobile users and actuators the results of event detection at anytime and anywhere. In this paper, we present MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using Mobile devices) developed system for providing more efficient and valuable information services with a variety of mobile devices and network camera integrated to WSN. Our system is performed based on IEEE 802.15.4 protocol stack. To validate system usability, we built sensor network environments where were equipped with five application sensors such magnetic, photodiode, microphone, motion and vibration. We also built and tested proposed MUSNEMO to provide a novel model for event detection systems with mobile framework.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.330-337
• /
• 2015

A service in the environments of internet of things (IoT) exist various types with automation facilities and sensors. There can configure so many communication protocols to networking facilities and sensors. To provide efficient various kind of service, a middleware platform, is based on the internet protocol network, is needed a unified access with devices, controlling and monitoring huge kind of facilities and sensors, to provide a efficient IoT service and application configurations. In this paper, we propose a middleware that an application and service interact with automation facilities and monitor sensors. The proposed middleware is designed with adapter pattern that one of the software engineering design pattern. The adapter pattern is to ensure communication with each sensor and to make sure of service scalability. Finally, the proposed component middleware shows that variety sensors can be easily configure the service in the IoT environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.912-919
• /
• 2005

The Growth in wireless Internet has made Networking possible at anytime and anywhere. So mobile devices like cellular phone and PDA are now used in various fields. In particular, the mobility of mobile devices has a great advantage in remote control. This paper designed and implemented a Mobile VNC system that transmitted the screen image of a remote computer, control the remote computer GU and monitor all by cellular phone. The proposed system consists of a Mobile Viewer un on the cellular phone, VNC Server m on a number of remote computers and a VNC Monitor. For communication between the VNC Server and the Mobile Viewer the MRFB protocol is used. The screen image transmitted to the Mobile Viewer is encoded in the PNG format supported by SK-VM, the Java execution environment of the Cellular phone. According to implementation results, the image is about $2KB\~8KB$. According to the 65 times transmission test, the average frame per second is 4.93fps in the emulator and a real cellular phone takes 0.8fps. Therefore, the proposed system is more efficient than existing systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2010

Recently, various industrial embedded systems including vehicles controlled electronically are evolving to distributed multi-micro controller system. Accordingly, there is a need for standard CAN(Controller Area Network) protocol that ensures high stability and reliability of communication and is simple to construct object-oriented system with high control efficiency. CAN communication interface used general-purpose processor doesn't have many limitations in various application development because of fixed hardware architecture. This paper design and implement a CAN communication interface system based on FPGA. It is verified function and performance of system through monitoring communication with existing AT90CAN128 controller. Implemented CAN communication interface can be reused in development of application systems based on FPGA. And it provides low-cost, small-size and low-power design advantages.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.285-291
• /
• 2002

The shearing process for the sheet metal is normally used in the precision elements such as a frame of TFT-LCD or lead frame of If chips. In these precision elements, the burr formation prevents the system assembly and needs the additional burr removing process. In this paper, we developed the small size NC punching system which has an aligning kinematics between the rectangular shaped punch and die. The punch is driven by an ai cylinder and the sheet metal is moving on the X-Y table system which is driven by two stewing motors. The microprocessor control the whole system and communicate with the monitoring PC by RS232C serial communication protocol. The graphic user interface program in PC monitors nil control the punching system. The cross shaped joint hinge supports the punching die and positioned by two differential screws, whose are installed in perpendicular directions. The aligning between the punch and die is performed using the sheets of half thickness(0.1mm Brass) of the real process for the frame of the TFT-LCD. Using half thickness Brass, the burr formation is magnified and we can decide the aligning direction more easily then using the real thickness(0.2mm) Aluminum. In this paper, the aligning results are measured manually using the SEM photographs and we hope to make the automated aligning procedures using some kinds of image processing techniques.

• Journal of Chest Surgery
• /
• v.45 no.2
• /
• pp.95-100
• /
• 2012

Background: The purpose of this report is to describe the perioperative outcomes of standard carotid endarterectomy (CEA) with general anesthesia, routine shunting, and tissue patching in symptomatic carotid stenoses. Materials and Methods: Between October 2007 and July 2011, 22 patients with symptomatic carotid stenosis (male/female, 19/3; mean age, $67.2{\pm}9.4$ years) underwent a combined total of 23 CEAs using a standardized technique. The strict surgical protocol included general anesthesia and standard carotid bifurcation endarterectomy with routine shunting. The 8-French Pruitt-Inahara shunt was used in all the patients. Results: During the ischemic time, the shunts were inserted within 2.5 minutes, and 5 patients (22.7%) revealed ischemic cerebral signals (flat wave) in electroencephalographic monitoring but recovered soon after insertion of the shunt. The mean shunting time for CEA was $59.1{\pm}10.3$ minutes. There was no perioperative mortality or even minor stroke. All patients woke up in the operating room or the operative care room before being moved to the ward. One patient had difficulty swallowing due to hypoglossal nerve palsy, but had completely recovered by 1 month postsurgery. Conclusion: Routine shunting is suggested to be a safe and reliable method of brain perfusion and protection during CEA in symptomatic carotid stenoses.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.221-229
• /
• 2007

Security of the port TCP/80 has been demanded by reason that the others besides web services have been rapidly increasing use of the port. Existing traffic analysis approaches can't distinguish web services traffic from application services when traffic passes though the port. monitoring method based on protocol and port analysis were weak in analyzing harmful traffic using the web port on account of being unable to distinguish payload. In this paper, we propose a method of detecting harmful traffic by web traffic analysis. To begin, traffic Capture by real time and classify by web traffic. Classed web traffic sorts each application service details and apply weight and detect harmful traffic. Finally, method propose and implement through coding. Therefore have a purpose of these paper to classify existing traffic analysis approaches was difficult web traffic classified normal traffic and harmful traffic and improved performance.