• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.75-90
• /
• 2012

Thin client computing trades local processing for network bandwidth consumption by offloading application logic to remote servers. User input and display updates are exchanged between client and server through a thin client protocol. On wireless devices, the thin client protocol traffic can lead to a significantly higher power consumption of the radio interface. In this article, a cross-layer framework is presented that transitions the wireless network interface card (WNIC) to the energy-conserving sleep mode when no traffic from the server is expected. The approach is validated for different wireless channel conditions, such as path loss and available bandwidth, as well as for different network roundtrip time values. Using this cross-layer algorithm for sample scenario with a remote text editor, and through experiments based on actual user traces, a reduction of the WNIC energy consumption of up to 36.82% is obtained, without degrading the application's reactivity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1238-1259
• /
• 2019

Saving energy is a big challenge for Wireless Sensor Networks (WSNs), which becomes even more critical in large-scale WSNs. Most energy waste is communication related, such as collision, overhearing and idle listening, so the schedule-based access which can avoid these wastes is preferred for WSNs. On the other hand, clustering technique is considered as the most promising solution for topology management in WSNs. Hence, providing interference-free clustering is vital for WSNs, especially for large-scale WSNs. However, schedule management in cluster-based networks is never a trivial work, since it requires inter-cluster cooperation. In this paper, we propose a clustering method, called Interference-Free Clustering Protocol (IFCP), to partition a WSN into interference-free clusters, making timeslot management much easier to achieve. Moreover, we model the clustering problem as a multi-objective optimization issue and use non-dominated sorting genetic algorithm II to solve it. Our proposal is finally compared with two adaptive clustering methods, HEED-CSMA and HEED-BMA, demonstrating that it achieves the good performance in terms of delay, packet delivery ratio, and energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4385-4399
• /
• 2021

The Internet of Things (IoT) eHealth systems composed by Wireless Body Area Network (WBAN) has emerged recently. Sensor nodes are placed around or in the human body to collect physiological data. WBAN has many different applications, for instance health monitoring. Since the limitation of the size of the battery, besides speed, reliability, and accuracy; design of WBAN protocols should consider the energy efficiency and time delay. To solve these problems, this paper adopt the end-edge-cloud orchestrated network architecture and propose a transmission based on reinforcement algorithm. The priority of sensing data is classified according to certain application. System utility function is modeled according to the channel factors, the energy utility, and successful transmission conditions. The optimization problem is mapped to Q-learning model. Following this online power control protocol, the energy level of both the senor to coordinator, and coordinator to edge server can be modified according to the current channel condition. The network performance is evaluated by simulation. The results show that the proposed power control protocol has higher system energy efficiency, delivery ratio, and throughput.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.4
• /
• pp.226-230
• /
• 2022

The sheep can be reproduced by natural mating as well as applied reproductive biotechnology, embryo transfer (ET). However, this method in sheep is influenced by several factors such as season, photoperiod, latitude, temperature, nutrition, and breed. In addition, there is still less research on assisted reproductive technologies in small ruminants, compared to other livestock species such as cattle and pigs. Because there has been a need for an optimization and a continuous improvement of ET techniques in small ruminants. the main objective of this study was to evaluate the conception rate obtained after ET in Mongolian sheep (Dorper breed). After embryo recover, code 1 and 2 embryos (morula or blastocyst stage) for ET in the present study were 63% (63/100) and 24% (24/100), respectively. Then Each single embryo was transferred to a synchronized recipient who prepared by estrous synchronization protocol with fluorogestone acetate-cloprostenol sodium. The results demonstrated that an average conception rate and lambing rate was 35.6% (31/87) and 33.3% (29/87), respectively. Further study is still necessary, but these results indicated that single embryo of Mongolian sheep with the present protocol was enough to conducting ET when the genetically superior sheep were necessary to be expanded.

• Journal of radiological science and technology
• /
• v.38 no.1
• /
• pp.1-6
• /
• 2015

Whole spine scanography (WSS) is a radiological examination that exposes the whole body of the individual being examined to x-ray radiation. WSS is often repeated during the treatment period, which results in a much greater radiation exposure than that in routine x-ray examinations. The aims of the current study were to evaluate the patient dose of WSS using computer simulation, image magnification and angulation of phantom image using different patient position. We evaluated the effective dose(ED) of 23 consecutive patients (M : F = 13:10) who underwent WSS, based on the automatic image pasting method for multiple exposure digital radiography. The Anterior-Posterior position(AP) and Posterior-Anterior position( PA) projection EDs were evaluated based on the PC based Monte Carlo simulation. We measured spine transverse process distance and angulation using DICOM measurement. For all patient, the average ED was 0.069 mSv for AP position and 0.0361 mSv for PA position. AP position calculated double exposure then PA position. For male patient, the average ED was 0.089 mSv(AP) and 0.050 mSv(PA). For female patient, the average ED was 0.0431 mSv(AP) and 0.026 mSv(PA). The transverse process of PA spine image measured 5% higher than AP but angulation of transverse process was no significant differences. In clinical practice, just by change the patient position was conformed to reduce the ED of patient. Therefor we need to redefine of protocol for digital radiography such as WSS. whole spine scanography, effective dose, patient exposure dose, exposure direction. protocol optimization.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1189-1193
• /
• 2010

Mobility management is one of the most important research issues in 6LoWPAN, Since the IP-WSN application domain is expanded to real-time applications such as healthcare and surveillance systems, a fast and seamless handover becomes an important criterion in 6LoWPAN. However, a draft of IETF 6LoWPAN WG for mobility support does not decrease handover delay. Although LoWMob supports a fast intra-PAN handover. it can be supported when the infrastructure node has the location information of the other nodes in the mobile node's moving direction. In this paper, we propose a fast and seamless mobility protocol to support intra-PAN handover, named intra-MARIO. In intra-MARIO, a parent node of the mobile node preconfigures its handover to the PAN when the parent node detects its movement, thereby reducing the handover delay. Since intra-MARIO also supports route optimization, the mobile node can communicate with its corresponding nodes through the optimal route. In this paper, we analysis the signaling cost and evaluates that the handover can be completed in 20ms by simulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.5
• /
• pp.37-51
• /
• 2010

In this paper, we discuss the program implementation and system optimization for the effective transfer of huge amount of data. In VLBI which is observing the celestial bodies by using radio telescope hundreds thousands km apart, it is necessary for each VLBI observatory to transfer up to terabytes of observed data. For this reason, e-VLBI research based on advanced network is being actively carried out for the transfer of data efficiently. Following this trend, in this paper, we discuss design & implementation of system for the high speed Gbps data transfer rates. As a data transfer protocol, we use UDP for designing data transmission program with much higher speeds than currently available via VTP(VLBI Transport Protocol). Tsunami-UDP algorithms is applied to implementing data transfer program so that transmission performance could be maximize, also we make it possible to transfer observed data more fast and reliable through optimization of computer systems in each VLBI statopm.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.185-206
• /
• 2015

This paper presents statistical models developed to study the influence of key mix design parameters on the properties of lightweight self-consolidating concrete (LWSCC) with expanded shale (ESH) aggregates. Twenty LWSCC mixtures are designed and tested, where responses (properties) are evaluated to analyze influence of mix design parameters and develop the models. Such responses included slump flow diameter, V-funnel flow time, J-ring flow diameter, J-ring height difference, L-box ratio, filling capacity, sieve segregation, unit weight and compressive strength. The developed models are valid for mixes with 0.30-0.40 water-to-binder ratio, high range water reducing admixture of 0.3-1.2 % (by total content of binder) and total binder content of $410-550kg/m^3$. The models are able to identify the influential mix design parameters and their interactions which can be useful to reduce the test protocol needed for proportioning of LWSCCs. Three industrial class ESH-LWSCC mixtures are developed using statistical models and their performance is validated through test results with good agreement. The developed ESH-LWSCC mixtures are able to satisfy the European EFNARC criteria for self-consolidating concrete.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.367-376
• /
• 2005

The smooth handoff supported by the route optimization extension to the mobile IP standard protocol should support a packet buffering mechanism at the base station (BS), in order to reduce the degradation in TCP performance caused by packet losses within mobile network environments. The purpose of packet buffering at the BS is to recover the packets dropped during intersubnetwork handoff by forwarding the packets buffered at the previous BS to the new BS. However, when the mobile host moves to a congested BS within a new foreign subnetwork, the buffered packets forwarded by the previous BS are likely to be dropped. This subsequently causes global synchronization to occur, resulting in the degradation of the wireless link in the congested BS, due to the increased congestion caused by the forwarded burst packets. Thus, in this paper, we propose an implicit priority forwarding (IPF) packet buffering scheme as a solution to this problem within mobile IP based networks. In the proposed IPF method, the previous BS implicitly marks the priority packets being used for inter-subnetwork handoff. Moreover, the proposed modified random early detection (M-RED) buffer at the new congested BS guarantees some degree of reliability to the priority packets. The simulation results show that the proposed IPF packet buffering scheme increases the wireless link utilization and, thus, it enhances the TCP throughput performance in the context of various intersubnetwork handoff cases.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.339-349
• /
• 1999

The punose of this paper is to introduce the comprehensive CAM system (called PosCAM) supporting various function requested from shop floor operators. PosCAM is comported of two subsystems (PosCAM I and PosCAM II) which are designed to make up for the contemporary CAD/CAM systems. PosCAM I is mainly for : a) verifying the part programs written in both custom macros and standard G-codes, b) enhancing machining productivity and quality with built-in cutting conditions and feedrate optimization algorithm. PosCAM II is for : a) efficiently managing the numerous part programs and tool data stored in CNC memory, and b) integratively controlling and monitoring various CNCs from the control center through RS-422 with DNC 2 protocol. The developed systems have been tested via various experiments, and can be Applied for the industrial CNC machine shop as a means for enhancing productivity. The PosCAM system has been implemented and successfully used in the Machine Shop Department of PosCAM since march 1998.