• Journal of the Korea Computer Industry Society
• /
• v.3 no.3
• /
• pp.369-382
• /
• 2002

The increase of vehicles stagnations leads to the increasing attention to the way customers pay and a large number of Projects on electronic cash system. Tranport system is comprised of a number of advanced technologies, including information processing, communications, control, and electronics. Recently many research on a system which provides contact in order to protect driver's vehicle passage have been carried out. And some potential problems from that system are being reviewed by electronic cash system. In this papers, we suggest RF protocol developing technology using the concept of electronic cash. ATM electronic cash developing is consist of component of pre-developed coin throw, integration of component using its, and production of more requirement-satisfactory ITS solution. Result increase 15-40% pre-type vehicles stagnations. Especially, we expect this proposed concept would be well adapted to our national environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.889-896
• /
• 2007

Advances in wireless networking, micro-fabrication and integration, and embedded microprocessors have enabled a new generation of massive-scale sensor networks. Because each sensor node is limited in size and capacity, it is very important to design a new simple and energy efficient protocol. Among conventional sensor networks' routing protocols, the directed diffusion scheme is widely blown because of its simplicity. This scheme, however, has a defect in that sending interest and exploratory data messages while setting connection paths consumes much energy because of its flooding scheme. Therefore, this paper proposes a new sensor network routing protocol, called sequenced directed diffusion with a threshold control, which compromises the conventional directed diffusion scheme's defect and offers an energy efficient routing idea. With a computer simulation, its performance is evaluated and compared to the conventional directed diffusion scheme. Numerical results show that the proposed scheme offers energy efficiency while routing packets, and resolves ill-balanced energy consumption among sensor nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1441-1447
• /
• 2008

It is possible to transfer huge data in mobile device by advancing mobile technology, and so in this base, various services are offered. Especially, E-commerce service is offering on mobile environment, and this service is based on XML(eXtensible Markup Language) Signature. XML Signature assure that process integrity, message authentication, and/or signer authentication. And WIPI(Wireless Internet Protocol for Interoperability) that is mobile internet integration platform was proposed to integrate mobile device platform. However, because WIPI transmits and exchanges message by tort of XML base, encryption of XML document and necessity of XML signature are increasing because of weakness of security. Therefor in this paper, Encryption and XML signature module of XML document that satisfy standard requirement in WIPI platform base design and implementation. System that was proposed in this paper used standard encryption and XML signature algorithm and supports safe encryption and XML signature through doing security simulation applied various algorithm for XML document of mobile environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.440-448
• /
• 2021

This paper presents problems of network technology in smart grid and implements a blockchain-based LoRa multi-hop network to solve them. Since some smart grid applications are operated in harsh environments, it is difficult to establish communication infrastructure. We propose a LoRa network with multi-hop using the Flooding routing protocol. Smart grid environment composes an independent network using various power grid protocols depending on the application. Since this has a problem that an independent infrastructure must be established for each network, a single gateway device supports multiple power grid protocols to implement a method for network integration. Lastly, the author applied Hyperledger-based blockchain to the LoRa network to ensure the integrity of data in a smart grid environment, and strengthened security by physically distributing it. After constructing the three suggestions on the actual test bed, we confirmed that the network operates normally through experiments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.920-929
• /
• 2004

Nowadays, wireless packet data services are provided over cdma2000 1x/1xEV-DO mobile communication network and Portable Internet are being standardized for users demanding higher data rate services. Portable Internet can provide high data rate services, but its service coverage is relatively small. If Portable Internet may be integrated with cdma2000 mobile networks, users are able to choose the best service according to service areas and get seamless services while they are moving around. At the same time, it is cost-effective for operators to construct and maintain the integrated network. For the purpose of effectively integrating Portable Internet into cdma2000 networks, we propose an integration scheme including network architecture, protocol architecture, functions in network elements, interfaces between them, and call-flow procedures. The integration scheme proposed in this paper adopts a tightly-coupled architecture for unified authentication/accounting and seamless services. In addition, the scheme can be implemented without modifying the existing cdma2000 mobile communication networks. It is also simple to develop the dual-mode mobile station. Through the simulation results based on the performance model for handoffs between cdma2000 and Portable Internet, it has teen validated that the proposed scheme diminishes packet losses compared with the loosely-coupled architecture.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.159-164
• /
• 2013

Recently the solution integrated of vision and motion controller which are important element in automatiomn system has been many developed. However typically such a solutions has a many case that integrated vision processing and motion control into network or organized two chip solution on one module. We implement one chip solution integrated into vision and motion controller using Zynq-7000 that is developed recently as extended processing platform. We also apply EtherCAT to motion control that is industrial Ethernet protocol which have compatibility for open standardization Ethernet in order to control of motion because EtherCAT has a secure to realtime control and can treat massive data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1539-1543
• /
• 2004

This paper describes platform overview, system integration and dynamic walking control of the humanoid robot, KHR-2 (KAIST Humanoid Robot - 2). We have developed KHR-2 since 2003. KHR-2 has totally 41 DOF (Degree Of Freedom). Each arm including a hand has 11 DOF and each leg has 6 DOF. Head and trunk also has 6 DOF and 1 DOF respectively. In head, two CCD cameras are used for eye. In order to control all joints, distributed control architecture is adopted to reduce the computation burden of the main controller and to expand the devices easily. The main controller attached its back communicates with sub-controllers in real-time by using CAN (Controller Area Network) protocol. We used Windows XP as its OS (Operating System) for fast development of main control program and easy extension of peripheral devices. And RTX, HAL(Hardware Abstraction Layer) extension program, is used to realize the real-time control in Windows XP environment. We present about real-time control of KHR-2 in Windows XP with RTX and basic walking control algorithm. Details of the KHR-2 are described in this paper.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.189-192
• /
• 2000

This paper proposes a fuzzy-based random access controller with a superimposed frame structure (F$^2$RAC) fur voice/data-integrated wireless networks. F$^2$RAC adopts mini-slot technique for reducing contention cost, and these mini-slots of which number may dynamically vary from one frame to the next as a function of the traffic load are further partitioned into two regions for access requests coming from voice and data traffic with their respective QoS requirements. And F$^2$RAC is designed to properly determine the access regions and permission probabilities for enhancing the data packet delay while ensuring the voice packet dropping probability constraint. It mainly consists of the estimator with Pseudo-Bayesian algorithm and fuzzy logic controller with Sugeno-type of fuzzy rules. Simulation results prove that F$^2$RAC can guarantee QoS requirement of voice and provide the highest throughput efficiency and the smallest data packet delay amongst the different alternatives including PRMA［1］, IPRMA［2］, and SIR［3］.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1360-1371
• /
• 1998

There are many implementation methods according to models integrating TMN Agent into an ATM switch. In this paper, we evaluate the integrating models for integrating the Agent into an ATM switch in the aspects of the size of MIB(Management Information Base), the internal protocol profiles and the facility of implementation. Based on the evaluation, we choose an integrating model and implment the Agent. To ensure merit of the model, we propose an interface for exchanging management information between the Agent and an ATM switch. We also show the feasibility of our Agent system through some filed testes for the average processing time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.678-683
• /
• 2003

This study presents a result of performance with the design of network topology for voice and data integration under computer network. This network is consisted of FastEthernet, other LANs and ATM WAN(wide area network), and performance evaluation of delay in a PBX+IP network, delay in a VoIP network and delay in a IP+ATM network will be shown. We use parameters including network bandwidth, number of packet, routing protocol(IGRP, OSPF). We simulate integrated of voice and data used PBX. we will study further about the case of integrated of voice and data environments using PBX. and, evaluate IP+ATM WAN average measured network delay and average delay of VoIP network.