• KNOM Review
• /
• v.22 no.1
• /
• pp.42-51
• /
• 2019

Recently, the amount of internet traffic is increasing due to the increase in speed and capacity of the network environment, and protocol data is increasing due to mobile, IoT, application, and malicious behavior. Most of these private protocols are unknown in structure. For efficient network management and security, analysis of the structure of private protocols must be performed. Many protocol reverse engineering methodologies have been proposed for this purpose, but there are disadvantages to applying them. In this paper, we propose a methodology for inferring a detailed protocol structure based on network trace analysis by hierarchically combining CSP (Contiguous Sequential Pattern) and SP (Sequential Pattern) Algorithm. The proposed methodology is designed and implemented in a way that improves the preceeding study, A²PRE, We describe performance index for comparing methodologies and demonstrate the superiority of the proposed methodology through the example of HTTP, DNS protocol.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.1
• /
• pp.23-29
• /
• 2013

TCN(train communication network) standard was approved in 1999 by the IEC (IEC 61375-1) and IEEE (IEEE 1473-T) organizations to warrant a reliable train and equipment interoperability. TCN defines the set of communication vehicle buses and train buses. The MVB(multifunction vehicle bus) defines the data communication interface of equipment located in a vehicle and the WTB(wire train bus) defines the data communication interface between vehicles. The WTB and each MVB will be connected over a node acting as gateway. Also, to support applications demanding a high reliability, the standard defines a redundancy scheme in which the bus may be double-line and redundant-node implemented. In this paper we have presented protocol analysis platform for the WTB redundancy which is part of TCN system, to verify communication state of high-speed trains. As a confirmation of its validity, the technology described in this paper has been successfully applied to state monitoring and protocol verification of redundancy WTB based on TCN.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.19 no.1
• /
• pp.31-42
• /
• 2023

As computer performance is leveled upward, the use of IoT systems is gradually expanding. Although IoT systems are used in many fields, it is true that it is difficult to build a safe system due to performance limitations. To overcome these limitations, many researchers have proposed numerous protocols to improve security issues. Among them, Azrour et al. except. We proposed a new efficient and secure authentication protocol for remote healthcare systems in a cloud-based IoT environment, and claimed that the new protocol could solve the security vulnerabilities of the existing protocols and was more efficient. However, in this paper, through the security analysis of the remote healthcare system in the cloud-based IoT environment proposed by Azrour et al., the protocol of this system was found to be vulnerable to Masquerade attack, Lack of Perfect Forward Secrecy, Off-line password guessing attack, and Replay attack.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9823-9829
• /
• 2014

Background: High-dose methotrexate (HD-MTX) is recognized as an efficient component of therapy against pediatric osteosarcoma in combination with other drugs such as cisplatin (CDP), carboplatin (CBDCA), doxorubicin (ADM), etoposide (VP-16) and ifosfamide (IFO). Objectives: To demonstrate the feasibility and effectiveness of the HD-MTX/CDP/DOX/VP-16/IFO [MTX(+)] protocol comparable to CDP/ADM/CBDCA/IFO [MTX(-)] for treating childhood osteosarcoma at Ramathibodi Hospital (1999-2014). Materials and Methods: A retrospective analysis was conducted of osteosarcoma patients aged less than 18 years treated with two chemotherapeutic regimens between 1999 and 2014. A total of 45 patients received the MTX(-) and 21 the MTX(+) protocol. Results: Overall limb-salvage and amputation rate were 12.9% and 77.7%, respectively. Kaplan-Meier analysis results for 3-year disease free survival (DFS) and overall survival (OS) regardless of treatment regimens were $43.4{\pm}6.0%$ and $53.2{\pm}6.1%$ respectively. The 3-year DFS and OS were improved significantly with the MTX(+) protocol compared to MTX(-) protocol (p=0.010 and p=0.009, log rank test) [$69.8{\pm}10.5%$, $79.8{\pm}9.1%$ for MTX(+) and $31.1{\pm}6.9%$, $42.2{\pm}7.4%$ for MTX(-) protocol, respectively]. Patients with metastatic osteosarcoma treated with the MTX(+) protocol had statistically significant higher 3-year DFS and OS than those treated with the MTX(-) protocol ($66.7{\pm}13.6%$ and $15.0{\pm}8.0%$ for 3-year DFS, p=0.010, $73.3{\pm}13.2%$ and $20{\pm}8.9%$ for 3-year OS, p=0.006, respectively). The independent risk factors for having inferior 3-year DFS and OS were poor histological response (tumor necrosis <90%) and treatment with the MTX(-) protocol. The multivariate analysis identified only the treatment with the MTX(-) protocol as an independent predictor of inferior OS with a hazard ratio (HR) of 3.53 (95% confidence interval of 1.2-10.41, p=0.022). Conclusions: Our study demonstrated the tolerability, feasibility and efficacy of the HDMTX-based regimen improving the survival rate in pediatric osteosarcoma cases, in line with reports from developed countries.

• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.110-121
• /
• 2018

The present article is concerned with a study on the daily training protocol for field crews wearing chemical protection clothing for firefighting and the analysis of activity. To improve coping ability of & secure safety for firefighting crews initially incorporated in the fields of chemical accident & chemical terror, 10 steps in total of daily training protocol have been designed. The designed protocol is largely composed of the extensive activity protocol for daily adaptation of firefighting chemical protection clothing (steps 1, 2, 6, 7 & 9), the precision operation protocol utilizing hands (steps 3, 4 & 5), and the protocol requiring strong physical burdens (steps 8 & 10). According to the measurement results for activity as a result of the protocol, the average maximum heart rate upon wearing the firefighting chemical protection clothing was shown to increase by step 1 20.32%, step 2 18.69%, step 3 25.23%, step 4 34.77%, step 5 27.44%, step 6 30.24%, step 7 25.33%, step 8 22.25%, step 9 22.80% and step 10 20.85% compared with the time of not wearing them. The average maximum breathing rate was shown to increase by step 3 1.92%, step 4 4.11%, step 5 1.24%, step 6 3.95%, step 7 0.93%, step 8 10.23%, step 9 3.36% and step 10 15.10%, except for steps 1 & 2.

• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.109-118
• /
• 2006

A case study bas been conducted to explore design activities of four expert designers through protocol analysis, We examined relations among design information, process patterns and solution qualities with two complementary coding schemes based on design contents and design process, Relation between personal creativity modes and design activities has been examined as well. Regarding design process, an adequate distribution of activities in process may be necessary to bring out a good solution. It seemed that the more design contents about context, external knowledge, and general feature are used, the more unique design concepts are made. Regarding personal creativity modes, not much of differences in that design activity were observed while only a few relations between designer's personality and design activity were observed. The fact that the designers participated are all experienced designers could explain this. Investigation on the differences between novice designers and expert designer reflected in protocol data based on design information and design process coding scheme is to be done. Also, how personal process patterns observed through this protocol analysis can be utilized in composing design team.

• Journal of Microbiology
• /
• v.44 no.2
• /
• pp.155-161
• /
• 2006

Comparative analysis of microbial communities in a sequencing batch reactor which performed enhanced biological phosphorus removal (EBPR) was carried out using a cultivation-based technique and 16S rRNA gene clone libraries. A standard PCR protocol and a modified PCR protocol with low PCR cycle was applied to the two clone libraries of the 16S rRNA gene sequences obtained from EBPR sludge, respectively, and the resulting 424 clones were analyzed using restriction fragment length polymorphisms (RFLPs) on 16S rRNA gene inserts. Comparison of two clone libraries showed that the modified PCR protocol decreased the incidence of distinct fragment patterns from about 63 % (137 of 217) in the standard PCR method to about 34 % (70 of 207) under the modified protocol, suggesting that just a low level of PCR cycling (5 cycles after 15 cycles) can significantly reduce the formation of chimeric DNA in the final PCR products. Phylogenetic analysis of 81 groups with distinct RFLP patterns that were obtained using the modified PCR method revealed that the clones were affiliated with at least 11 phyla or classes of the domain Bacteria. However, the analyses of 327 colonies, which were grouped into just 41 distinct types by RFLP analysis, showed that they could be classified into five major bacterial lineages: ${\alpha},\;{\beta},\;{\gamma}-$ Proteobacteria, Actinobacteria, and the phylum Bacteroidetes, which indicated that the microbial community yielded from the cultivation-based method was still much simpler than that yielded from the PCR-based molecular method. In this study, the discrepancy observed between the communities obtained from PCR-based and cultivation-based methods seems to result from low culturabilities of bacteria or PCR bias even though modified culture and PCR methods were used. Therefore, continuous development of PCR protocol and cultivation techniques is needed to reduce this discrepancy.

• Journal of Internet of Things and Convergence
• /
• v.2 no.4
• /
• pp.41-47
• /
• 2016

The IP address used in the Internet has the role of both identifier and locator to bind a host and the application, however, this binding restricts some functions such as mobility and multi-homing. As a result, we suggested a host ID-LOC separation protocol using DHT with SDN features. The proposed scheme is a network-based scheme, and uses IPv6 addresses. The underlying network is partitioned into Host Identity domain and IP domain for identifiers and locators. In this paper, we present a simple cost model for analyzing both the proposed scheme and one of the previous works, the MOFI. The result of cost analysis shows better performance of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.187-194
• /
• 2004

We propose priority-based reservation code multiple access (P-RCMA) which can enhance voice traffic quality of the previous RCMA. The proposed protocol maintains two power levels and consider traffic characteristics in contending shared available codes to transmit packets. P-RCMA gives priority to the voice request packets rather than data packets by capture effect at the receiver part of base station. We show numerical results from EPA (equilibrium point analysis) analysis and simulation study in terms of voice packet dropping probability and average data packet transmission delay.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.47-53
• /
• 2010

An analysis of biosignal and performance data collected during driving has increasingly employed in research to explore a human-vehicle interface design for better safety and comfort. The present study developed a protocol and a system to effectively analyze biosignal and driving performance measurements in various driving conditions. Electrocardiogram (ECG), respiration rate (RR), and skin conductance level (SCL) were selected for biosignal analysis in the study. A data processing and analysis protocol was established based on a comprehensive review of related literature. Then, the established analysis protocol was implemented to a computerized system so that immense data of biosignal and driving performance can be analyzed with ease, efficiency, and effectiveness for an individual and/or a group of individuals of interest. The developed analysis system would be of use to examine the effects of driving conditions to cognitive workload and driving performance.