• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.109-120
• /
• 2007

Auxiliary support systems such as the reinforced protective umbrella method have been applied before tunnel excavation to increase ground stiffness and to prevent the large deformation. However, determination procedure of geotechnical parameters along the construction sequence contains various errors. This study suggests a method to characterize the time-dependent behavior of pre-reinforced zones around the tunnel using elastic waves. Experimental results show that shear strength as well as elastic wave velocities increase with the curing time. Shear strength and strength parameters can be uniquely correlated to elastic wave velocities. Obtained results from the laboratory tests are applied to numerical simulation of tunnel considering its construction sequences. Based on numerical analysis, initial installation part of pre-reinforcement and portal of tunnel are critical for tunnel stability. Result of the time-dependent condition is similar to the results of for $1{\sim}2$ days of the constant time conditions. Finally, suggested simple analysis method combining experimental and numerical procedure which considering time-dependent behavior of pre-reinforced zone on tunnel would provide reliable and reasonable design and analysis for tunnel.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.913-920
• /
• 2003

Soybean sauce fermented with soybean and wheat, has been a major condiment of Korean diets from centuries ago. Melanoidin, a brown pigment generally found in various food systems, is a final product produced in amino-carbonyl reaction during soybean sauce processing. Antioxidative activities of soybean sauce and melanoidin were investigated in vitro system using linoleic acid emulsion. Soybean sauce and glucose-lysine model melanoidin showed the stronger antioxidative effect than control by ferric thiocyanate and conjugated diene assays. In addition, DPPH radical scavenging effect of soybean sauce was higher than melanoidin, which was ascribed to soluble peptide and low molecular protein existing in soybean sauce. To ascertain antioxidative effect of dietary soybean sauce and melanoidin in vivo, the male Wister rats were fed 10% soybean sauce or 10% glucose-lysine model melanoidin with corn oil or fish oil for 5 weeks. Fatty acid compositions in liver and plasma were influenced by oil source. Therefore, EPA and DHA contents of fish oil group were higher than those of corn oil group. When the inhibitory effect of soybean sauce and melanoidin on lipid peroxidation using TBARS methods was measured, fish oil group (FC) showed higher malondialdehyde (MDA) content than corn oil group (CC). However, supplementation of soybean sauce and melanoidin to fish oil group attenuated MDA formation. In the levels of phosphatidyl choline hydroperoxide (PCOOH) in liver and plasma by CL (chemiluminescence)-HPLC method, PCOOH in FC group was significantly higher than that of CC group both in liver and plasma. Supplementation of soybean sauce to fish oil groups significantly inhibited the formation of PCOOH in plasma and liver, while melanoidin suppressed hepatic PCOOH formation. Based on these results, it can be suggested that soybean sauce possesses stronger antioxidative potential than melanoidin.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5879-5884
• /
• 2013

With the rapid industrialization and economical development, the electricity demands of the industrial facilities and densely populated large cities are continuing to increase in Korea. The increase in the power consumption requires the extension of power facilities, but it is difficult to secure spaces for equipment installation in the limited space of urban areas. In addition, the 154 kV or 345 kV transmission systems in Korea has a short transmission distance, and are connected to one another in network structures that ensure the high reliability and stability of power supply. This structure reduces the impedance during the fault in power system, and increases the magnitude of in the short circuit fault current. The superconducting fault current limiter (SFCL) was devised to effectively address these existing problems. The SFCL is a new-concept eco-friendly protective device that ensures fast operation and recovery time for the fault current and does not need additional fault detection devices. Therefore, many studies are being conducted around the world. In this paper, based on the wiring method the initial fault current characteristics, current limiting characteristics, according to the incident angle and the change in inductance current limiting characteristics were analyzed in a multifaceted methods.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Korean Journal of Environmental Biology
• /
• v.17 no.1
• /
• pp.1-9
• /
• 1999

Numerous observations revealed strong evidence of increased middle ultraviolet radiation or UV-B (280 ~ 320 nm) at the earth's surface resulting from stratospheric ozone depletion. UV is the waveband of electromagnetic radiation which is strongly absorbed by nucleic acids and proteins, thus causing damage to living systems. It has been recorded in the East Sea, Korea that solar UV-B impinging on the ocean surface penetrates seawater to significant depths. Recent researches showed that exposure to UV-B for as short as 2h at the ambient level (2.0 Wm$^{-2}$) decreased macroalgal growth and photosynthesis and destroyed photosynthetic pigments. These may suggest that UV-B could be an important environmental factor to determine algal survival and distribution. Some adaptive mechanisms to protect macroalgae from UV-damage have been found, which include photoreactivation and formation of UV-absorbing pigments. Post-illumination of visible light mitigated UV-induced damage in laminarian young sporophytes with blue the most effective waveband. The existence of UV-B absorbing pigments has been recognized in the green alga, Ulva pertusa and the red alga, Pachymeniopsis sp., which is likely to exert protective function for photosynthetic pigments inside the thalli from UV-damage. Further studies are however needed to confirm that these mechanisms are of general occurrence in seaweeds. Macroalgae together with phytoplankton are the primary producers to incorporate about 100 Gt of carbons per year, and provide half of the total biomass on the earth. UV-driven reduction in macroalgal biomass, if any, would therefore cause deleterious effects on marine ecosystem. The ultimate impacts of increasing UV-B flux due to ozone destruction are still unknown, but the impression from UV studies made so far seems to highlight the importance of setting up long-term monitoring system for us to be able to predict and detect the onset of large -scale deterioration in aquatic ecosystem.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.339-349
• /
• 2020

Double-leaf blast-resistant doors consisting of steel box and slab are application-specific structures installed at the entrances of protective facilities. In these structural systems, certain spacing is provided between the door and wall. However, variation in the boundary condition and structural behavior due to this spacing are not properly considered in the explosion analysis and design. In this study, the structural response and failure behavior based on two variables such as the spacing and blast pressure were analyzed using the finite element method. The results revealed that the two variables affected the overall structural behavior such as the maximum and permanent deflections. The degree of contact due to collision between the door and wall and the impact force applied to the door varied according to the spacing. Hence, the shear-failure behavior of the concrete slab was affected by this impact force. Doors with spacing of less than 10 mm were vulnerable to shear failure, and the case of approximately 15-mm spacing was more reasonable for increasing the flexural performance. For further study, tests and numerical research on the structural behavior are needed by considering other variables such as specifications of the structural members and details of the slab shear design.

• Journal of agricultural medicine and community health
• /
• v.31 no.3
• /
• pp.219-236
• /
• 2006

Objectives: To develop a model of a official management system for agricultural disease, injury and accidents, We analyzed current Korean status and management system about occupational injury and accident of farmers. Methods: For national management systems of industry safety and health and current status of occupational injuries and accidents of farmers, related literature such as books, theses, articles, and web documents were collected and analyzed. Results and Conclusion: The regulations of protecting occupational injury and accidents of farmers are suggested as follows: (1)insurance and compensation act for occupational injury and accident of farmers, (2)setting standards of occupational injuries and accidents of farmers, (3)mandating the usage of safety devices for agricultural vehicles and equipments, (4)reporting occupational injuries and accidents that occur among farmers, (5)registering pesticides and assessing safety usage, (6)implementing safety training, (7)supporting personal protective equipments and agricultural safe facilities etc.

• Korean Security Journal
• /
• no.42
• /
• pp.205-227
• /
• 2015

The Korean Peninsula is put in a position to carry out a highly strategic game vis-a-vis nK, which is asserting itself as a nuclear power amongst Northeast Asia's complex dynamics. While the international community recognizes nK's possession of nuclear weapons as released secret based on nK's three nuclear tests, shrewd strategic thinking is needed by ROK to secure itself as a non-nuclear nation in order to assume a responsible role to the international community, while simultaneously being ready to respond at all times for nK's military provocations. ROK must continue with its twofold strategy, by firm response to military confrontation with nK and maintaining flexible policy of tolerance in the areas of economy and ethnicity. Various strategic options to overcome nK's nuclear threats have been presented to ROK, whose possession of nuclear weapons have been difficult, and nK's nuclear capability is a real threat to ROK's national security. We must be able to respond to nK's nuclear threats strictly from ROK's national security perspective. This thesis aims to propose a response policy for nK's nuclear capability and nK's nuclear attack based on analysis of such nuclear damage, ROK Government's response posture against nK's nuclear threats, centered around ROK Government's non-military response posture.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.530-535
• /
• 2021

Background: Despite the lack of official COVID-19 statistics, various workplaces and occupations have been at the center of COVID-19 outbreaks. We aimed to compare legal measures and governance established for managing COVID-19 infection risks at workplaces in nine Asia and Pacific countries and to recommend key administrative measures. Methods: We collected information on legal measures and governance from both general citizens and workers regarding infection risks such as COVID-19 from industrial hygiene professionals in nine countries (Indonesia, India, Japan, Malaysia, New Zealand, Republic of the Philippines, Republic of Korea, Taiwan, and Thailand) using a structured questionnaire. Results: A governmental body overseeing public health and welfare was in charge of containing the spread and occurrence of infectious diseases under an infectious disease control and prevention act or another special act, although the name of the pertinent organizations and legislation vary among countries. Unlike in the case of other traditional hazards, there have been no specific articles or clauses describing the means of mitigating virus risk in the workplace that are legally required of employers, making it difficult to define the responsibilities of the employer. Each country maintains own legal systems regarding access to the duration, administration, and financing of paid sick leave. Many workers may not have access to paid sick leave even if it is legally guaranteed.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.244-249
• /
• 2021

The hydroponic culture for growing 'Duke' blueberry was evaluated in a protective greenhouse provided with similar environmental conditions to the conventional blueberry cultivations. One year old 'Duke' blueberry bushes planted in 180 L containers filled with 130 L peat moss and 40 L pearlite (v/v) were selected for the experiment. A nutrient solution consisted with NO₃-N 4.6, NH₄-N 3.4, PO₄-P 3.3, K 3, Ca 4.6, and Mg 2.2 mmol^-1 was supplied to the plants, comparing non-hydroponic treatment (provided with only underground water). Hydroponic culture increased number of shoot per bush by 18% and total shoot length by 24% compared with non-hydroponic culture. Total dry weight of a bush increased in the hydroponic with vigorous root growth 1.4-fold more than the non-hydroponic. Higher concentrations of inorganic elements and organic compounds were found in the hydroponic, indicating active nutrient absorption of the bush. The hydroponic produced high yield similar to adult bush from 4 years old age, maintaining the yield until 8 years old age. The findings of this study indicated that hydroponic cultivation systems will be useful for growing blueberry crop.