• Resources Recycling
• /
• v.3 no.1
• /
• pp.17-24
• /
• 1994

Recovery of precious metal values from petrochemical spent catalyst is important from the viewpoint of environmental protection and resource recycling. Two types of spent catalysts were used in this study. One used in the manufacture of ethylene contains 0.3% Pd in the alumina substrate. The other used in oil refining contains 0.3% Pt and 0.3% Re. Both spent catalysts are roasted to remove volatile matters as carbon and sulfur. Then, metallic Pd powder from Pd spent catalyst is obtained in the course of grinding, hydrochloric acid or aqua regia leaching and cementation with iron. For the recovery of Pt and Re from Pt-Re spent catalyst, Pt and Re are leached with either HCI or aqua regia, first. Metallic Pt powder is recovered from the leach solution by cementation with Fe powder. Re in sulfide form is precipitated by the addition of sodium sulfide to the solution obtained after Pt recovery. It is found that 6N HCI can be successfully used as leaching agent for both types of spent catalyst. 6N HCI is considered to be better than aqua regia in consideration of reagent and equipment cost.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.70-77
• /
• 2017

As the quality of live gets better, the frequency of using air conditioner is along drastically increasing. On that matter, setting up measures of preventing increasing fire cases has been required. 43,413 fire cases occurred in last 2016, the cases occurred by electricity account for about 20%(8,655 cases). Among the electricity cases, the amount of cases occurred with air conditioner issues covers 1.5%; causes of the fire incidents vary, including incomplete contacts, short circuits, tracking, and such. In this study, we intend to investigate the case of ignition at the connection point where the power cord connected to the outdoor unit is arbitrarily connected during the air conditioner installation process, and to propose preventive measures against the cause in order to reduce the damage of life as well as the property from electric fire incidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.445-450
• /
• 2018

AIS is the most important navigation equipment for the identification of other ships, etc. However, the AIS overload problem has been raised recently due to an increase in AIS equipped vessels. The government is planning to introduce the wireless LTE network at 100 km offshore as part of the SMART-Navigation project. Continuous development and dissemination of the services available through such platforms will be necessary to achieve major goals such as marine accident prevention and environmental protection. In this study, we applied a WAVE communication system, which could be the basis for the development of such services. As a result, reliable data transmission was confirmed for a range of communication of approx. 5 miles, although the service was limited to 1 km in road traffic. Therefore, it is expected that WAVE communication technology will be used to prevent marine accidents through such efforts as collision avoidance and the transfer of marine safety information between ships.

• Health Policy and Management
• /
• v.31 no.3
• /
• pp.244-254
• /
• 2021

The management of emerging infectious diseases cannot help but completely depend on non-pharmaceutical interventions in the early stages of the outbreak. Consequently, South Korea has developed and implemented the 3T (test-trace-treat) models, non-pharmaceutical infection prevention and control (IPC) measures, in response to the coronavirus disease 2019 (COVID-19) pandemic. The IPC measures have gained global attention, rendering them to be essential in the development of a shareable, reusable, and applicable protocol for future pandemics. This study was conducted to identify the requirements necessary for standardizing the IPC measures. Three new work items of the 18 3T models were proposed to ISO/TC 304 (International Organization for Standardization/Technical Committee 304; healthcare organization management). Requirements for each IPC measure, identified by participating members (P-members) countries during the ISO ballots, were analyzed in this study. The three new work items were approved by the P-members countries after a 3-month ballot. There was a consensus that the three IPC measure models should be International Standards (IS). Other comments include (1) the models should include not only COVID-19 but also any respiratory pandemic; and (2) keep donning of level D protection at screening sites as an optional protocol, in consideration for the lack of personal protective equipment. Standardization is a systematic process of developing internationally agreed-upon wisdom and knowledge that consider and respect the diversity and universality of each country. It is expected that such standardized applicable IPC measure models contribute to global efforts to rapidly respond to a public health emergency of international concern during its early stages.

• Journal of Digital Convergence
• /
• v.19 no.7
• /
• pp.209-215
• /
• 2021

This study is a system development for voice information protection equipment in major meetings and places requiring security. Security performance and stability were secured with information leakage prevention technology through generation of false noise and ultrasonic waves. The cutoff frequency band for blocking the leakage of voice information, which has strong straightness due to the nature of the radio wave to the recording prevention module, blocks the wideband frequency of 20~20,000Hz, and the deception jamming technology is applied to block the leakage of voice information, greatly improving the security. To solve this problem, we developed a system that blocks the recording of a portable smartphone using a battery, and made the installation of a separate device smaller and lighter so that customers do not recognize it. In addition, it is necessary to continuously study measures and countermeasures for efficiently using the output of the anti-recording speaker for long-distance recording prevention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.67-72
• /
• 2010

In this paper, we verify the driverless operation possibility of MBS, which could overcome the defects of conventional track-circuit-based FBS, such as additional needs of maintenance and others problems according to short-circuit sensibility and, and which could allow the minimal interval between trains. With MBS, we can expect the reduction of headway, then the increase of transportation demand, and the protection of unnecessary speed variation because it allows the real time detection of train position from central office, and direct transmission of data between preceding trains and the following ones. In addition, it is possible to reduce the number of wayside-equipment substantially, to improve the passenger service, and to the achieve the positive economic effects by comfortable ride.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.643-650
• /
• 2020

The materials with a high processiblity for radiation shielding, in particular for 3D printable materials, are highly demanding for producing robots working in nuclear plants and designing customized personal protection equipment. In this study, we suspend tungsten particles in a polymeric matrix of either PLA or ABS to compose tungsten-polymer composite filaments; PLA and ABS are widely used for conventional FDM-based 3D printing. The weight fraction of tungsten particles can be increased up to 50% without forming macroscopic aggregates. The composite filaments can be used to print 3D architectures with any shape and geometry. To demonstrate one of potential applications, we print parts for robot actuator and assemble them to protect PCB against gamma ray.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.107-114
• /
• 2011

Today the company adopts to use information management method at the network base such as internet, intranet and so on for the speed of business. Therefore the security of information asset protection and continuity of business within company in relation to this is directly connected to the credibility of the company. This paper secures continuity to the certified users using queuing model for the business interruption issue caused by DDoS attack which is faced seriously today. To do this I have reflected overloaded traffic improvement process to the queuing model through the analysis of related traffic information and packet when there occurs DDoS attack with worm/virus. And through experiment I compared and analyzed traffic loading improvement for general network equipment.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.4
• /
• pp.85-110
• /
• 2006

Recently, there have been a number of news reports on natural disasters, like earthquakes. typhoons, floods and tsunami, all over the world. Korea does not seem to be safe from such disasters or terror threats. As places with high numbers of visitors. libraries need to take preventive measures to be prepared for such disasters and threats. This paper analyzes the current status of emergency measures adopted by 75 public libraries in Seoul. Daejeon and Jeonbuk in Korea. For each library surveyed. the causes of and ways to recover from disasters were reviewed and detailed analyses were carried out in low areas: Implementation of preventive measures disaster management and equipment, status of human resources and assignment of people to disaster recovery, safety courses offered to library users and training methods. In addition, each area was analyzed in regard to possible solutions and ideas for improvement, as well as suggestions to upgrade disaster recovery systems in the future.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.14-19
• /
• 2013

National Fire Safety Code 103 regulates that all operating sprinkler in design area must be discharged 1 bar or more pressure and release 80 lpm or more flow rate as minimum criteria. NFSC103 also provides that the number of operating sprinkler in design area is 10, 20, 30 according to the building classification and the total flow rate is 800, 1,600, 2,400 lpm depending on 80 lpm per sprinkler. If sprinkler system is designed as above provisions, the pressure and the flow rate accordingly become smaller than the minimum criteria about 50 % sprinklers. It results in serious consequence that the purpose of sprinkler system as initial fire reaction equipment is failure. In order to solve these problems, It is desirable that Performance-based fire protection design, hydraulic calculation, is carried out to all sprinkler system.