• 제목/요약/키워드: Protection measure

검색결과 598건 처리시간 0.026초

액체섬광계수기를 이용한 환경시료중 $^{241}Pu$분석 (Determination of $^{241}Pu$ in Environmental Samples Using Liquid Scintillation Counting System)

  • 이명호;홍광희;최용호;김상복;최근식;이창우
    • Journal of Radiation Protection and Research
    • /
    • 제21권2호
    • /
    • pp.91-98
    • /
    • 1996
  • 알파방출핵종 존재하에 베타방출핵종인 $^{241}Pu$ 최적 분석조건을 검토하였다. 펄스파고 분석기법을 이용하여 PSA 준위를 설정하였다. $^{241}Pu$ 표준선원을 이용하여 figure of merit가 최대가 되도록 $^{241}Pu$ counting channel를 조정하였고 계측효율이 최대가 되도록 형광체 부피를 설정하였다. 최적화된 $^{241}Pu$ 분석법을 토양과 이끼등의 환경시료에 적용하여 $^{241}Pu$ 방사능농도를 측정하였고. $^{241}Pu/^{239,\;240}Pu$ 방사능 비율로부터 우리나라의 일부 토양 및 이끼에 침적된 Pu의 근원을 규명하였다.

  • PDF

한국 주변 해역 표층해수중 삼중수소 농도 (Tritium Concentrations in Surface Seawater around Korean Peninsula)

  • 김창규;조용우;김계훈
    • Journal of Radiation Protection and Research
    • /
    • 제21권2호
    • /
    • pp.107-115
    • /
    • 1996
  • 전해농축법을 이용하여 한국 주변 해역 해수중 저준위 삼중수소를 측정하였다. 동 서 남해안에서 채취된 표충해수중 삼중수소를 측정한 결과, 삼중수소 농도는 $0.12 BqL^{-1}$에서 $1.50 BqL^{-1}$ 범위내의 값을 나타내었으며 그 평균값은 $0.60{\pm}0.353qL^{-1}$였다. 해역별 평균 삼중수소 농도는 동해안에서 $0.54{\pm}0.30 BqL^{-1}$ 남해안에서 $0.48{\pm}0.35 BqL^{-1}$. 서해안에서 $0.77{\pm}0.32 BqL^{-1}$의 농도분포를 각각 나타내었으며, 해역별로 큰 차이를 나타내지 않았다. 또한, 시료채취지점이 매우 좁은 위도범위내에 한정되어 있어 위도에 따른 삼중수소 농도의 체계적인 변화는 관찰되지 않았다. 본 연구에서 얻어진 표층해수 중 삼중수소 농도 준위는 일본 근해에서 조사된 결과와 매우 유사하였으며, 태평양지역에서의 삼중수소 농도에 비해서는 약간 높은 값을 나타내었다.

  • PDF

형광 X 선을 이용한 100 KeV 이하의 에너지 영역에서의 단색 Photon 선원개발에 관한 연구 (Development of Monoenergetic Photon Source in the Energe Range below 100 keV by the X-ray Fluorescence Method)

  • 이연명;이건재;하석호;황선태;이경주
    • Journal of Radiation Protection and Research
    • /
    • 제10권1호
    • /
    • pp.14-28
    • /
    • 1985
  • 고순도 물질의 $K_{\alpha}$형광 X-선을 이용하여 100 keV 이하에서의 단색 Photon 선원을 개발하였다. 단색 Photon은 방사선 측정기기의 교정에 매우 유용한 것으로 얇은 금속박막의 Radiator에 제동복사선을 조사하여 얻을 수 있다. 본 실험에서는 $_{47}Ag,\;_{50}Sn,\;_{68}Er,\;_{70}Yb,\;_{82}Pb$, 등의 Radiator를 사용하여 20 keV 에서 80 keV의 범위에서 단색 Photon을 얻어내어 고순도 HpGe LEPS로 0.64-0.94에 이르는 단색도를 얻어내었고 600cc 얇은창이온전리함을 사용하여 8.3mR/h 에서 232. 5mR/h에 이르는 선량률을 얻어 내였다.

  • PDF

FREM을 적용한 고층건물의 화재위험도 비교평가연구 (A Study of Comparative Evaluation for High-rise Building Fire Risk by the Use of FREM)

  • 김동일;손기상;이수경
    • 한국화재소방학회논문지
    • /
    • 제16권1호
    • /
    • pp.45-50
    • /
    • 2002
  • 본 연구는 화재위험도 분석 개념과 정의 및 접근방식을 검토하여 건물화재위험도 분석의 기반을 구축하였으며, 다음으로 컴퓨터 프로그램인 FREM을 사용하여 국내외 대표적인 고층건물 100동에 대한 화재위험도를 평가한 후 위험의 유형을 도출하였고, 또한 외국에서 개발된 이 기법을 국내에서 적용하였을 때 발생되는 문제점을 밝혔다. 고층건물의 화재위험도 평가에 있어 가장 중요한 요소는 건물 내 방화구획과 자동소화설비의 신뢰도라 할 수 있다. 더불어 고층건물에서 화재안전을 확보하기 위하여서는 이 두 설비를 유효하게 설치하고 유지관리 하는 것이 무엇보다 중요하다. 또한, 차후 이 두 설비 등에 대한 신뢰도 평가기준을 더욱 심도 있게 연구하여, 지수를 이용한 건물 화재위험도 평가에 적용한다면 적은 비용으로 보다 정확한 위험도 산정이 가능할 것이다.

개인정보보호 대책의 효과 및 인과관계: 기업 및 개인의 개인정보보호 행동에 대한 실증분석 및 그 시사점 (Effects and Causality of Measures for Personal Information: Empirical Studies on Firm and Individual Behaviors and their Implications)

  • 신일순
    • 정보보호학회논문지
    • /
    • 제26권2호
    • /
    • pp.523-531
    • /
    • 2016
  • 본 연구에서는 갈수록 심각해지는 개인정보 유 노출 문제에 대해 기업 및 개인의 개인정보와 관련한 행동 및 그 결과를 기존의 연구에 비해 보다 충실하고 풍부하며 이질적인 데이터를 이용하여 실증적으로 살펴봄으로써 개인정보 문제를 좀 더 미시적인 차원에서 이해하고 이를 기초로 해결책을 논의하는 시도를 하였다. 선택편이(selection bias)의 문제를 해결할 수 있는 성향점수 매칭(PSM) 방법을 통한 실증분석의 결과, 우리의 직관과는 달리 기업이 기술적 대책을 적극적으로 수립하고 정보보호를 위한 투자를 많이 할수록 오히려 개인정보 침해사고를 경험할 가능성이 높아지며, 개인들 역시 바이러스 검사를 더 자주할수록 침해사고를 경험할 가능성이 높아지는 것으로 나타났다. 또한 개인정보 침해를 경험한 기업이 개인정보보호 투자를 늘리는 경향이 있으며, 개인정보 침해를 경험한 사람들이 바이러스 검사를 더 적극적으로 할 가능성이 높아지는 역의 인과관계(reverse causality)의 결과가 도출되었다. 이러한 결과를 바탕으로 개인정보보호 대책에 대한 시사점을 논의하였다.

지능형 영상 감시 환경에서의 개인정보보호를 위한 COP-변환 기반 메타데이터 보안 기법 연구 (A Study on COP-Transformation Based Metadata Security Scheme for Privacy Protection in Intelligent Video Surveillance)

  • 이동혁;박남제
    • 정보보호학회논문지
    • /
    • 제28권2호
    • /
    • pp.417-428
    • /
    • 2018
  • 지능형 영상감시 환경은 CCTV 등에서 실시간으로 수집한 영상데이터의 분석을 통해 영상 객체에 대한 다양한 정보를 추출하고 이를 기반으로 자동화된 처리를 가능하게 하는 기술이다. 그러나 지능형 영상감시 환경에서는 프라이버시 노출 문제가 발생할 수 있어 이에 안전한 대책이 필수적이다. 특히, 영상 메타데이터에는 빅데이터 기반으로 분석된 다양한 개인정보가 포함될 수 있어 높은 위험성을 안고 있으나, 효율성의 문제로 영상메타에 암호화 방식을 적용하는 것은 적절하지 않다. 본 논문에서는 영상메타를 안전하게 보호할 수 있는 COP-변환 기법을 제안한다. 제안한 방식은 메타 변환을 통하여 원본 메타정보를 복원할 수 없도록 하며, 변환된 데이터에 직접적으로 질의를 가능하게 하므로 영상 메타데이터 처리과정에서의 안전성과 효율성을 크게 높인다는 장점이 있다.

역사적 건축물의 에너지 효율 향상을 위한 계획기법 -서양의 연구동향 및 사례를 중심으로- (Technical Measures for Improving Energy Efficiency in Historic Buildings -Focused on Researches and Case Studies of the West-)

  • 김태영
    • 한국농촌건축학회논문집
    • /
    • 제20권1호
    • /
    • pp.69-76
    • /
    • 2018
  • This study is to research technical measures for improving energy efficiency in the conservation and reuse of historic buildings focused on the recent research trends and case studies of the west. These measures are broadly classified into three types, the passive measures for saving energy and increasing comfort, the most cost-effective energy saving strategies, and the renewable energy sources. Firstly, the passive measures are divided into the elements and systems. The passive elements are awnings and overhanging eaves, porches, shutters, storm windows and doors, and shade trees. There are also the natural ventilation systems such as the historic transoms, roofs and attics to improve airflow and cross ventilation to either distribute, or exhaust heat. Secondly, the most cost-effective energy efficiency strategies are the interior insulation, airtightness and moisture protection, and the thermal quality improvement of windows. The energy efficiency solutions of modern buildings are the capillary-active interior insulation, the airtightness and moisture protection of interior walls and openings, and the integration of the original historic window into the triple glazing. Beyond the three actions, the additional strategies are the heat recovery ventilation, and the illumination system. Thirdly, there are photovoltaic(PV) and solar thermal energy, wind energy, hydropower, biomass, and geothermal energy in the renewable energy sources. These energy systems work effectively but it is vital to consider its visual effect on the external appearance of the building.

전력계통 신뢰도 기준 분석을 통한 765kV 선로사고에 대한 부하차단 적정량 산정에 관한 연구 (Determination of Reasonable Amounts of Under-Voltage Load Shedding for 765kV T/L According to the Power System Reliability Standards)

  • 유제호;허진;차준민;김태균;강부일;조수환
    • 전기학회논문지
    • /
    • 제64권6호
    • /
    • pp.845-851
    • /
    • 2015
  • Load shedding is a last measure to avoid nationwide cascading collapses of power system by removing the pre-determined amount of loads from the main grid. In Korea, SPS(Special Protection System) is prepared to keep the power system stability from the extreme contingency of the critical transmission line losses. Among them, we need to pay attention to 765kV T/L’s because they have great influence on the total system stability. According to the present SPS operating guide, the total loads of 1,500MW should be removed through 2 step under-voltage load shedding(UVLS) scheme in case of 765kV T/L’s contingencies. However, it is not clear to defined how to determine the typical load reduction amounts for each case. This paper proposes a method to estimate appropriate amounts of load shed for 765kV T/L’s contingencies by analyzing the relevant national and international standards.

극저준위 백그라운드 감마선 측정시스템의 성능시험 (Performance Test of the Ultralow Background Gamma-Ray Measurement System)

  • 나원우;이영길
    • Journal of Radiation Protection and Research
    • /
    • 제22권3호
    • /
    • pp.219-226
    • /
    • 1997
  • 환경시료 및 Swipe시료에서 방출되는 감마선을 측정 분석하기 위하여 극저준위 백그라운드 감마선 측정시스템을 설치하였다. 본 측정시스템은 백그라운드를 저감하기 위해 극저방사능 물질로 구성된 수동적 차폐방법, 우주선 영향을 차단하기 위한 역동시 측정법, 그리고 공기중 방사성 핵종인 라돈가스를 시스템 내부에서 제거하는 방법 등을 적용하고 있다. 적용된 백그라운드 저감법에 대한 성능시험 결과, 실험실 조건의 백그라운드 준위가 관심 대상 에너지 영역($50\;keV{\sim}2\;MeV$)에서 $10^{-2}$ order 정도로 저감되었다. 그리고 미신고 핵활동을 탐지하기 위한 관심 대상 핵종의 감마선 에너지 영역에서 평가된 시스템의 최소검출하한(MDA)값은 환경시료 분석에 적합한 것으로 평가되었다. 그러나 저에너지 영역에서는 여전히 우주선에 의한 중성자 영향이 백그라운드 요인으로 작용하고 있는 것으로 분석되었다.

  • PDF

Application of In Situ Measurement for Site Remediation and Final Status Survey of Decommissioning KRR Site

  • Hong, Sang Bum;Nam, Jong Soo;Choi, Yong Suk;Seo, Bum Kyoung;Moon, Jei Kwon
    • Journal of Radiation Protection and Research
    • /
    • 제41권2호
    • /
    • pp.173-178
    • /
    • 2016
  • Background: In situ gamma spectrometry has been used to measure environmental radiation, assumptions are usually made about the depth distribution of the radionuclides of interest in the soil. The main limitation of in situ gamma spectrometry lies in determining the depth distribution of radionuclides. The objective of this study is to develop a method for subsurface characterization by in situ measurement. Materials and Methods: The peak to valley method based on the ratio of counting rate between the photoelectric peak and Compton region was applied to identify the depth distribution. The peak to valley method could be applied to establish the relation between the spectrally derived coefficients (Q) with relaxation mass per unit area (${\beta}$) for various depth distribution in soil. The in situ measurement results were verified by MCNP simulation and calculated correlation equation. In order to compare the depth distributions and contamination levels in decommissioning KRR site, in situ measurement and sampling results were compared. Results and Discussion: The in situ measurement results and MCNP simulation results show a good correlation for laboratory measurement. The simulation relationship between Q and source burial for the source layers have exponential relationship for a variety depth distributions. We applied the peak to valley method to contaminated decommissioning KRR site to determine a depth distribution and initial activity without sampling. The observed results has a good correlation, relative error between in situ measurement with sampling result is around 7% for depth distribution and 4% for initial activity. Conclusion: In this study, the vertical activity distribution and initial activity of $^{137}Cs$ could be identifying directly through in situ measurement. Therefore, the peak to valley method demonstrated good potential for assessment of the residual radioactivity for site remediation in decommissioning and contaminated site.