• 제목/요약/키워드: Propylene Oxide

검색결과 135건 처리시간 0.018초

부유부상 공정의 마이크로 스틱키 제거 효율에 관한 연구 (Removal Efficiency of Microstickies by Flotation Process)

  • 박일;이학래
    • 펄프종이기술
    • /
    • 제37권3호
    • /
    • pp.1-8
    • /
    • 2005
  • Increase in the utilization rate of recycled paper and closing level of papermaking system increased the problem associated with stickies that include decrease in process runnability and product quality. It is required to establish a process for removing the micro stickies to solve the problems associated with stickies. In this study, the application of flotation process as a method to remove micro stickies was examined. Model micro stickies (MMS) were prepared using microcrystalline cellulose (MCC) and pressure sensitive adhesives (PSA), and the influence of three nonionic surfactants on the removal efficiency of MMS from flotation process was examined. Also the effect of surfactants on the deposition of micro stickies that remaining in the papermaking wet end onto wire was examined. Removal efficiency of MMS by flotation was increased when the proportion of nonionic surfactant with propylene oxide (PO) type hydrophilic tail was increased and stock pH was 7. It was suggested that this nonionic surfactant minimized the increase of surface energy of hydrophobic MMS. The MMS with high hydrophobicity remaining in the papermaking system, however, would cause more serious deposition problems on papermaking wet end. Therefore, it is of great importance to increase the removal efficiency of MMS in flotation process for the prevention of papermaking system contamination caused by stickies deposition.

생체적합성과 생분해성을 갖는 키틴유도체의 합성과 물성V -라이소자임에 의한 액정성 키틴 유도체의 생분해특성- (Synthesis and Physical Properties of Bioc'ompatible and Biodegradable Chitin Derivatives V. -Biodegradation of liquid Crystalline Chitin Derivatives by Lysozyme-)

  • 김선정;이영무
    • 대한의용생체공학회:의공학회지
    • /
    • 제15권1호
    • /
    • pp.89-96
    • /
    • 1994
  • 키틴의 글루코사민 단위에 클로로프로판, 산화프로필렌 그리고 클로로프로판 디올을 반응시켜 프로필 키틴(PPC), 히드록시프로필 키틴(HPC), 디히드록시프로필 키틴(DHPC)등의 에테르 형태의 키틴 유도체를 합성하였고, 이들을 99% 포름산에 용해시켜 고분자 농도 30 wt%이상에서 콜레스테릭한 유방성 액정을 형성하였다. 액정이 형성된 용액으로부터 필름을 제조하여 라이소자임이 포함된 유사 체액, pH 1.2, pH 6.7 그리고 pH 8.2 용액에서 in vitro 분해정도를 관찰한 결과 처음 1주일에서 급격하게 분해되었으며 중성 영역에서 큰 무게 감소와 기계적 강도가 감소하였다. 세가지 시료들 중 DHPC가 가장 좋은 생분해 정도를 나타냈다.

  • PDF

Influence of Amino Acidic Additives on Properties of EPDM-g-MAH/ZnO Composites

  • Choi, Sung-Seen;Kim, Yeowool;Chung, Yu Yeon;Bae, Jong Woo;Kim, Jung-Soo
    • Elastomers and Composites
    • /
    • 제51권3호
    • /
    • pp.175-180
    • /
    • 2016
  • Influence of amino acidic chemical on properties of maleic anhydride-grafted ethylene-propylene-diene terpolymer/zinc oxide (EPDM-g-MAH/ZnO) composites was investigated. 4-Aminosalicylic acid (ASA), 4-amino-2-methoxybenzoic acid (AMBA), 12-aminolauric acid (ALA), and glutamine (Gln) were employed as the amino acidic chemicals. Though small quantity (0.5 phr) of the amino acidic chemical was added to the EPDM-g-MAH/ZnO composite, the properties were notably changed. By adding the amino acidic chemical, the percent crystallinity and apparent crosslink density were reduced. Order of the percent crystallinity was related to that of the $pK_a$ values of amino acidic chemicals. By adding the amino acidic chemical, the basic tensile properties were on the whole improved. The experimental results were explained by the $pK_a$ values of amino acidic chemicals, change of zinc ionomer formation, and interactions between the additive and EPDM-g-MAH chain.

VOCs 광촉매 분해용 $TiO_2$촉매제조 및 성능평가 (Performance Test of $TiO_2$ Catalyst in VOCs Photocatalytic Degradation)

  • 이승범;이재동;박윤신
    • 환경위생공학
    • /
    • 제20권4호통권58호
    • /
    • pp.45-50
    • /
    • 2005
  • Titania gel formations were prepared by sol-gel method using titanium(IV) chloride $(TiCl_4)$, and its characteristics were analyzed by varying the $epoxide/TiCl_4$ ratio and the amount of water In the end, titania $(TiO_2)$ aerogel were prepared using supercritical drying process. VOCs such as benzene, toluene, and m-xylene (BTX) were oxidized using prepared titania aerogel and commercially available $TiO_2$, and its performance was compared. The surface area, pore volume, and average pore diameter of 1,2-epoxybutane are significantly smaller than the propylene oxide. And the titania aerogels with 6 moi of epoxides have high surface areas, pore volumes, and average pore diameters. As a result of photo-oxidation, conversion of benzene was reached about $70\%$, and other reactants were reached about $60\%$ similarly. The conversion of BTX was increased as inlet concentration decreased. The reactivity of titania calcined at $600^{\circ}C$ was greater than $400^{\circ}C$ and $800^{\circ}C$. Water is required as a reactants for the oxidation of VOCs, and the continuous consumption of hydroxyl radicals required replenishments to maintain catalyst activity. The activity ratio increased with increasing reaction time when enough amount of water was present in the reactor.

에테르화 및 에스테르화를 통한 표면사이징용 변성 전분의 제조 (Modification of Starch for Surface Sizing via Etherification and Esterification)

  • 정영빈;이학래;윤혜정;지경락;김영석
    • 펄프종이기술
    • /
    • 제46권6호
    • /
    • pp.50-55
    • /
    • 2014
  • An oxidized starch was modified for surface sizing via etherification and esterification. Propylene oxide (PO), sodium monochloroacetate (SMCA), and acrylonitrile (AN) were used as etherification, and vinyl acetate monomer (VAM), maleic anhydride (MA), fumaric acid (FA), and itaconic acid (ITA) were used for esterification. Esterification and etherification of starch decreased both Brookfield viscosity and Brabender viscosity substantially even though the solids level was increased by 2% from 14 to 16%. Surface sizing performance of starches in tensile strength, stiffness and compressive strength was improved by esterification and etherification of the oxidized starch. Especially, SMCA etherification was found to be the most effective modification method.

고체전지용 $Li_xV_3O_8$ Composite 정극의 전기화학적 특성 (Electrochemical Properties of $Li_xV_3O_8$ Composite Cathode for All-solid state Rechargeable Battery)

  • 김종욱;성창호;구할본;박복기
    • 한국전기전자재료학회논문지
    • /
    • 제11권9호
    • /
    • pp.733-738
    • /
    • 1998
  • 본 논문에서는 고체 리듐 전지를 개발하기 위하여 poly(ethylene oxide) [PEO] 에 $LiClO_4$, poly (vinylidene fluoride) [PVDF] 및 가소제로 propylene carbonate [PC] 와 ethylene carbonate[EC] 등을 혼합여 고분자 저해질을 제조하였다. 또한 고체 리듐 전지용 정극으로써 우수한 특성이 기대되는 $Li_xV_3O_8$을 졸-겔법에 의해 합성하여 $Li_xV_3O_8$SPE/Li cell 의 전기화학적 특성을 측정하였다. 고분자 matrix는 PEO와 PVDE를 혼합 사용한 결과 $PEO_4 PVDF_4LiCIO_4PC_5EC_5$ 고분자 전해질이 상온에서 $5.2 {\times} 10{-3}$ S/cm 의 높은 이온 전도도를 나타냈으며 리듐 이온 transference number는 0.3이었다. 졸-겔법에 의해 제조된 $Li_xV_3O_8$을 사용한 $Li_xV_3O_8$SPE/Li cell의 방전시 cell 저항이 방전 초기에는 비소한 증가를 하다가 방전 말기 전압인 2.0V에서 크게 증가하였다. $Li_xV_3O_8$ composite 정극의 첫 번째 방전 용량은 295㎃h/g이었으며 8번째 충방전 싸이클부터 방전 용량이 안정화 되었고 15번째 방전 용량도 212㎃h/g으로 고체 전지용 정극으로써 우수한 특성을 보였다.

  • PDF

Raman and Fluorescence Studies of Thermotropic Liquid-Crystalline Oligomers with Different Type of Coils

  • Chae, Jong-Bok;Yu, Soo-Chang;Lee, Youn-Sik
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권2호
    • /
    • pp.193-199
    • /
    • 2007
  • Raman and fluorescence spectroscopies were employed to study the coil effects on the intermolecular structure of a rod-coil liquid crystalline (LC) oligomer, the esterification products of ethyl 4-[4'-oxy-4-biphenylcarbonyloxy]- 4'-biphenylcarboxylate with poly(propylene)oxides (PPO) (DP=12) and poly(ethylene oxide)s (PEO) (DP=12). Three different vibrational modes (carbonyl, aromatic C-H, and aromatic C=C) obtained from the Raman experiment at variable temperature indicate that PPO and PEO coils induce the hydrogen bonding in a different manner. Further information about the micro-environment around the mesogenic unit obtained by fluorescence excitation spectra of P12-4 (LC with PPO coil) and 12-4 (LC with PEO coil) suggests that the mesogenic unit of P12-4 is quite different from that of 12-4 in intermolecular structure. This study supports the results obtained only from Raman spectroscopy, providing more accurate information about the intermolecular structural changes of liquid crystalline polymers at a molecular level during the phase transitions.

Cholesteric 액정질서를 지닌 Hydroxypropyl Chitosan 가교필름의 제조와 팽윤거동 (Preparation and Swelling Behavior of Cross-Linked Films of Hydroxypropyl Chitosan Possessing Cholesteric Liquid-Crystalline Order)

  • 마영대;김경희
    • 폴리머
    • /
    • 제24권3호
    • /
    • pp.418-430
    • /
    • 2000
  • 알칼리키토산과 프로필렌옥사이드를 반응시킴에 의해 유방성 및 열방성 액정상을 형성하는 새로운 히드록시프로필키토산(HPCTO)을 합성함과 동시에 HPCTO/메탄올의 유방성 액정용액에 glyoxal첨가하여 주형시킴에 의해 HPCTO의 가교필름들을 제조하였다. 가교필름들의 열 및 팽윤 특성을 검토하였다. 필름들은 cholesteric 액정상의 특징적인 지문조직을 나타내었으며 이들의 pitch는 온도 및 가교제의 농도가 증가할수록 증가하였다. 가교시료들은 물과 메탄을 중에서 이방성 팽윤을 나타내었으며, 이러한 사실은 HPCTO분자들간에 2차원적인 가교가 우선적으로 일어남을 시사한다. 이방성 팽윤의 정도는 용매의 종류에 크게 의존하나 검토된 가교제의 농도에는 의존하지 않았다.

  • PDF

추출용매에 따른 브로콜리의 항산화와 항염증에 대한 효과 (Effects of Broccoli on Anti-inflammation and Anti-oxidation According to Extraction Solvent)

  • 장민우;하배진
    • 한국식품위생안전성학회지
    • /
    • 제27권4호
    • /
    • pp.461-465
    • /
    • 2012
  • 본 실험에서는 여드름 치료에 사용되던 국소 레티노이드제와 항생제를 대용 할 수 있고 화장품에 사용되는 원료로 추출하여 항여드름 치료제 또는 화장품 원료를 개발하기 위해 실험한 결과 broccoli proplyeneglycol 그룹에서 DPPH, superoxide radical, nitric oxide assay 에서 모두 vitamin C에 가까운 활성을 나타내었고 paper disk diffusion test에서는 broccoli ethanol과 broccoli hexane 그룹에서 P. acne의 저해 활성을 나타낸 것으로 보아 항여드름 치료제 또는 화장품 원료로써의 유용 가치가 있다고 사료 되어진다.

산화분해촉매를 함유한 rPP/ZnO 나노컴포지트 유연식품포장필름 제조 및 물성 특성 연구 (Designed of rPP/d2w®/ZnO Nanocomposite Flexible Film for Food Packaging and Characterization on Mechanical and Antimicrobial Properties)

  • 이진경;길보민;이동진;이익모
    • 한국포장학회지
    • /
    • 제24권1호
    • /
    • pp.1-11
    • /
    • 2018
  • 본 연구에서는 수출 가능한 식품포장재로 pro-oxidant($d2w^{(R)}$)함유 rPP/ZnO 나노컴포지트 유연필름을 제조하였고, 이 산화분해 필름의 기계적 특성과 항균기능을 조사하였다. 산화분해필름은 일정조건의 열과 자외선 처리를 거친 후 특성분석으로 FT_IR, SEM, UTM, GPC를 측정하여 물성변화를 관찰하였다. 카보닐지수와 하이드록실지수에서 열과 자외선에 노출율이 많아질수록 수치는 상승하였다. 표면분석에서는 rPP/$d2w^{(R)}$/ZnO나노컴포지트 필름의 경우 표면이미지가 매끈하여 ZnO의 첨가가 고분자의 상용성을 향상시켰고, 열과 자외선차단효과로 분해를 감소시키는 효과로 작용하였다. 항균력시험에서는 그람음성균은 대장균으로 그람양성균은 황색포도상구균으로 항균력을 측정하였다. 결과로는, ZnO는 시험에 사용한 농도에서 3로그 이상의 미생물 감소율을 나타내었다. 그러나 유연 필름용으로는 ZnO의 농도가 높아질수록 투명도가 떨어지므로 사용에 제한이 있었다. rPP/$d2w^{(R)}$/ZnO가 함유한 시편에서 인장강도는 40% 상승하였고, 신율은 30% 감소되었다. ZnO를 첨가한 경우 기계적 물성상승과 열 안전성과 자외선차단성을 나타내었다. 산화분해능은 열 노출 $70^{\circ}C$ 온도에서 480시간 경과한 후, 자외선 조사로 72시간 노출 이후 시점의 분자량은 수평균분자량이 1,294 g/mol, 무게평균분자량이 5,920 g/mol로 분해되는 결과를 얻었다. 이것으로 UAE 5009:2009, ASTM 6954의 기준에 준한 필름을 제조할 수 있었다. 비교시편과 본 연구에서 제조한 산화분해필름의 분자량이 80.7%와 75.6% 감소한 결과를 얻음으로서, 자연 산화분해됨을 확인하였다. 식품포장재로서 안전성분석에서는 국내법 중 식품접촉플라스틱 폴리프로필렌의 기준에 적합하였다.