• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.231-238
• /
• 2014

In this study, the self-propulsion tests are performed in INHA towing tank. And the effective wake characteristics of the KVLCC2 and the KCS models are compared by the experimental results. The form factor is independent of Reynolds number. To estimate the hydrodynamic performance of a full scale ship, the form factor is determined to consider attendant on Reynolds number. In this research, the power predictions are carried out considering the form factor difference of model and full scale ship. The results of this research could be used as one of the fundamental data to the powering performance prediction.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.13-21
• /
• 2002

The tincture toughness is evaluated by using U(compact tension) and 3PB(three point bending) specimens of AI alloys far propulsive engine. To evaluate the static fracture toughness, strain gage method is used. The static fracture toughness obtained from the strain measurement is compared with the results by ASTM standard and FEM analysis. For the reliable evaluation of fracture toughness, strain gages are attached at various positions.

• 대한조선학회논문집
• /
• 제41권5호
• /
• pp.21-27
• /
• 2004

A waterjet propulsion system has many advantages compared with a conventional screw propeller especially for amphibious military vehicles because of a good maneuverability at low speed, good operating ability at shallow water, high thrust at low speed to aid maneuverability and exit from water, etc. Especially, compact design is important for the tracked-vehicle because of buoyancy in water and available space inside the tracked vehicle. The experiment is parametrically performed for various impeller diameters for more compact design. The experimental results are analyzed according to the ITTC 1996 standard analysis method as well as the conventional propulsive factor analysis method. The full-scale effective and delivered power of the tracked-vehicle are evaluated according to the variation of impeller diameter. This paper emphasized the effect of impeller diameter on the performance of waterjet system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.278-291
• /
• 2021

This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). 'Calm-water tests' and 'resistance test in waves' are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.65-75
• /
• 1993

Hull form development for an AFRAMAX tanker characterized by the form parameters of $C_B\simeq0.8$, $L/B\simeq5.5$, $B/T\simeq3.5$, han been carried out by the application of ‘Composite Stern Frameline Concept’. The viscous resistance of the new form was much smaller than that of the conventional form. Form factor of the new form was only 0.18 compared to 0.30 for the conventional hull form, Nevertheless the propulsive efficiency was slightly lower and thus the required propulsion power was smaller by 5~6% at both full load and ballast condition. In addition, it is confirmed that introduction of the form factor method such as ITTC’78 method is highly advisable because there is a great risk of the underperdicting full scale resistance of the hull form whose form the extrapolation of moel resistance to full scale is to be based on Froude method with the correlation allowances usually applied to conventional hull forms.

• 해양환경안전학회지
• /
• 제25권5호
• /
• pp.627-633
• /
• 2019

본 논문의 주 관심사항은 전산유체역학과 기존 모형시험 데이터를 활용하여 주어진 선박의 저항 및 추진성능을 추정하고 그 결과를 이용하여 에너지효율설계지표(Energy Efficiency Design Index, EEDI)를 평가하는 방법을 제시하는 것이다. 대상선박의 모형선 크기에서의 전 저항을 계산하기 위해 점성 유동 해석을 수행하였다. 유동계산은 STAR-CCM+를 사용하였으며 자유표면, 트림과 싱키지를 고려하였다. 점성 유동 해석 결과를 바탕으로 대상선박의 유효동력을 산정하였다. 준 추진효율 계수는 기 보유한 모형시험 데이터베이스를 이용한 추정식 및 유사선박의 시험자료를 활용하여 산정하였다. 최종적으로 EEDI 산정식에 대하여 유체동역학적 결과, 선박의 정보, 사용하는 연료에 대한 $CO_2$의 환산계수, 연료소모량 등을 바탕으로 일반화된 계산 프로그램을 작성하였다.

• 대한조선학회지
• /
• 제26권4호
• /
• pp.14-26
• /
• 1989

선박의 추진성능 추정을 위한 통계해석 기법을 연구하고 전산 프로그램을 만들었다. 조파저항계수의 추정식은 조파저항이론을 이용하여 스테이션 별 횡단면적계수의 곱으로 표현되도록 도출해 내었고, 이에 대한 회귀계수는 모형시험 결과를 회귀분석하여 얻었다. 형상계수, 반류비 및 추력감소율의 추정식들은 선체 주요지수, 스테이션 별 횡단면적계수 및 모형시험 결과들을 순순하게 회귀분석하여 얻었다. 통계해석은 여러가지 기술통계와 단계별 회귀분석 기법을 적절하게 이용하여 수행하였다. 추진성능 추정 프로그램은 저항계수, 추진계수, 프로펠러 단독효율 및 각종 척도효과 등을 모두 쉽게 수용할 수 있도록 다양하면서도 간결하게 만들었다.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.197-204
• /
• 2005

A waterjet propulsion system has many advantages compared with a conventional screw propeller especially for amphibious armored wheeled vehicles because of a good maneuverability at low speed, good operation ability at shallow water, high thrust at low speed to aid maneuverability and exit from water, etc. The POD type waterjet is adequate for the present wheeled vehicle because the weight is lighter and L/B is longer than the conventional armored amphibious vehicle. Resistance and self-propulsion tests with a 1/3.5-scale model are conducted at PNU towing tank. Based on these measurements, the performance is analyzed according to ITTC 96 standard analysis method and also according to the conventional propulsive factor analysis method. Based on these two methods, the full-scale effective and delivered powers of amphibious armored wheeled vehicle are estimated. This paper emphasizes the analysis method of model test of the waterjet propulsion system for a amphibious armored wheeled vehicle and the model test technique together with the comparison of the two analysis methods.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.169-179
• /
• 2005

In the 500m short track speed skating, the matter of who reaches the first corner first can important factor since each competitor races with all speed from the start to the first line. A filed study was attempted to kinematical estimation six female foreign skaters, who participated in the 500m female final round competition, and two Korea skates during the World Short track Skating Championship. The three dimensional motion analysis with DLT method was executed using four video cameras for analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that skaters and coaches the effective informations, and the following conclusions are drawn; The elapsed time by phase in start motion of the foreign skaters appeared shorter those of Korea skaters, so the start training of Korea skaters should be strengthed. Also the displacement of C.G in the foreign skaters appeared shorter displacement than those of Korea skaters. Especially in the starting position, the foreign skaters are superior to Korea skaters in displacement of first(left) and next following stroke(right). The velocity of C.G and maximum velocity of skate blade of foreign skaters art faster than those of Korea skaters. And the foreign skaters show the superior early velocity change. Both of leaning body angle, and left and knee angle of the foreign skaters lead to positive point of having the propulsive force in the early starting position. Observing in the most prominent feature of foreign and Korea skaters in start phase, foreign skaters skate quickly the third stroke. These features of Korea skaters would appear disadvantage of location selection in entering the coner course.