• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.83-88
• /
• 2016

In this study, previously reported surplus solar energy-related study result and current status of fan coil unit (FCU) for cooling and heating installed in the current sites were briefly examined and then a method to determine the number of FCUs required to recover surplus solar energy was schematically proposed to provide basic data for researchers and technical engineers in this field. The maximum, mean, and minimum outside temperatures during the experiment period were about $28.2^{\circ}C$, $4.4^{\circ}C$, and $-11.5^{\circ}C$, respectively. The horizontal surface solar radiation level outside the greenhouse was in a range of $0.8-20.5MJ{\cdot}m^{-2}$ and mean and total solar radiation were $10.8MJ{\cdot}m^{-2}$ and $1,187.5MJ{\cdot}m^{-2}$. The mean temperature and relative humidity in the greenhouse during the daytime were in a range of 18.8-45.5 and 53.5-77.5%. The total surplus solar energy recovered from the greenhouse during the experiment period was approximately 6,613.4MJ, which could supplement about 6.7% of the total heating energy 98,600.2 MJ. In addition, the number of FCUs installed for heating varies case to case, although similar FCUs are used. Thus, it is necessary to study the installation height, orientation and installation distance as well as the appropriate number of FCUs from the efficient and economical viewpoints. The required numbers of FCUs for surplus solar energy recovery were 8.4-10.9units and 6.1-8.0units based on air mass and circular flow rate that passed through the FCUs. Considering calculation methods and the risks such as efficiency and use environments of FCUs, it was found that about nine units (one unit per $24m^3$ approximately) needed to be installed. The required number of FCUs for surplus solar energy recovery was around one unit per $24m^3$ approximately.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.373-386
• /
• 2013

In this research, we specify the image consumers' preferred image quality ranges based on objective image quality evaluation factors and follow a method which measures preference of the natural image scenes. In other words, according to No-Reference, we select dynamic range, color, and contrast as factors of image quality measurements. For collecting sample images, we choose the preferred 200 landscapes which have over 30 recommendations by image consumers on the internet photo gallery. According to the scores of three objective factors of image quality measurements, the final expected score which means the image quality preference is measured and its total score is 100 points. In the main test, the actual image sample shows dynamic range 10 stop, LAB mean value L:54.7, A:2.96, B:-15.84, and RSC contrast 376.9. Total 200 image samples' normal distribution z value represents in dynamic range 0.21, LAB mean value L:0.15, A:0.38, B:0.13, and RSC contrast 0.08. In the standard normal distribution table, we can convert the z value as a percentage; dynamic range is 8.32%, LAB mean value is L:5.96%, A:14.8%, B:5.17%, and RSC contrast is 3.19%. And then, we convert the percentage values into the scores of 100; dynamic range is 91.68, LAB mean value is 91.36, and RSC contrast is 96.81. Therefore, we can conclude that the sample image's total mean score is 94.99 based on three objective image quality factors. Throughout our proposed image quality assessment model, we can measure the preference value of natural scenes. Also, we can specify the preferred image quality representation ranges and measure the expected image quality preference.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.149-158
• /
• 2004

Purpose : In order to evaluate the value of the renal expression of ICAM-1 as a marker of renal injury, we analyzed the relationship between abnormal tubular expression of ICAM-1 and histopathological features and clinical manifestations in children with IgA nephropathy (IgAN). Methods: The clinical data from 43 patients with IgAN were analyzed retrospectively and compared to the histopathologic subclassification proposed by Haas. ICAM-1 in tubular epithelium was assessed using the LSAB(Labeled streptavidine biotin) kit on the renal biopsy specimens. Results: In 43 patients with primary IgAN, 28 males and 15 females aged $12.2{\pm}2.2$ years were studied. There were no differences of renal tubular expression of ICAM-1 between patients with gross hematuria and without gross hematuria. But renal tubular expression of ICAM-1 in patients with proteinuria was significantly higher than that of in patients without proteinuria($78.2{\pm}14.19%\;vs\;55.8{\pm}32.20%,\;P<0.05$). Renal tubular expression of ICAM-1 was also associated with the severity of histopathological degree using Haas classification method. In subclass I, renal tubular expression of ICAM-1 was significantly lower than those of other subclasses. A significant correlation was found between the tubular expression of ICAM-1 and the total amount of protein in 24 hour collected urine$(r_s=0.47236,\;p<0.05)$. But there were no significant correlations between the renal tubular expression of ICAM-1 and interstitial cellular infiltration, tubular atrophy, and interstitial fibrosis respectively(F=0.89, P>0.05; F=0.31, p>0.05; F=0.21, p>0.05). Conclusion: Renal tubular expression of ICAM-1 can be a useful marker of renal injury in children with IgAN. (J Korean Soc Pediatr Nephrol 2004;8:149-158)

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.137-142
• /
• 2011

$TiO_2$-coated bamboo activated carbon has been prepared and utilized under UV irradiation as a pretreatment method for an effective biodegradation of the recalcitrant polyaromatic hydrocarbons (PAHs). The anatase $TiO_2$ was successfully coated on the bamboo activated carbon (AC) and it showed the highest photoactivity against methylene blue. In the absence of the PAHs-degrading bacteria PAHs having low molecular weight (i.e., naphthalene, acenaphthylene, acenaphthene, and fluorene) were degraded by 9.8, 76.2, 74.1, and 40.5%, respectively. Higher molecular weight PAHs, however, maintained high residual concentrations of PAHs (400-1,000 ${\mu}g$/L) after the same treatment. On the other hand, the overall concentrations of PAHs became lower than 340 ${\mu}g$/L when the pretreated PAHs were subjected to biodegradation by a PAH-degrading consortium for a week. Herein, phenanthrene, anthracene, fluoranthene, and pyrene were removed by 29.3, 61.4, 27.0, and 44.3%, respectively, indicating the facilitated potential biodegradation of PAHs. Activated carbon coated with $TiO_2$ appeared to inhibit growth of PAH degraders on the surface of AC, indicating planktonic degraders were dominantly involved in the PAH biodegradation in presence of the $TiO_2$-coated bamboo AC. It was proposed that an effective remediation technology for the recalcitrant PAHs could be developed when an optimum pretreatment process is further established.

• Progress in Medical Physics
• /
• v.21 no.3
• /
• pp.253-260
• /
• 2010

Most brachytherapy treatment planning systems employ a dosimetry formalism based on the AAPM TG-43 report which does not appropriately consider tissue heterogeneity. In this study we aimed to set up a simple Monte Carlo-based intracavitary high-dose-rate brachytherapy (IC-HDRB) plan verification platform, focusing particularly on the robustness of the direct Monte Carlo dose calculation using material and density information derived from CT images. CT images of slab phantoms and a uterine cervical cancer patient were used for brachytherapy plans based on the Plato (Nucletron, Netherlands) brachytherapy planning system. Monte Carlo simulations were implemented using the parameters from the Plato system and compared with the EBT film dosimetry and conventional dose computations. EGSnrc based DOSXYZnrc code was used for Monte Carlo simulations. Each $^{192}Ir$ source of the afterloader was approximately modeled as a parallel-piped shape inside the converted CT data set whose voxel size was $2{\times}2{\times}2\;mm^3$. Bracytherapy dose calculations based on the TG-43 showed good agreement with the Monte Carlo results in a homogeneous media whose density was close to water, but there were significant errors in high-density materials. For a patient case, A and B point dose differences were less than 3%, while the mean dose discrepancy was as much as 5%. Conventional dose computation methods might underdose the targets by not accounting for the effects of high-density materials. The proposed platform was shown to be feasible and to have good dose calculation accuracy. One should be careful when confirming the plan using a conventional brachytherapy dose computation method, and moreover, an independent dose verification system as developed in this study might be helpful.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.125-133
• /
• 2011

The purpose of this study was to develop a methodology to detect spinosad which are difficult to analyze by multi-component simultaneous analysis of pesticide residues. We monitored spinosad due to the paucity of related information. The spinosad was determined using HPLC with UV detector at 250 nm. Correlation coefficient ($r^2$) for standard curve of spinosad A and D at standard concentration of 0.1-5.0 mg/kg were 0.999, respectively. Limit of quantitation (LOQ) of HPLC analysis was 0.005 mg/kg while limit of detection (LOD) was 0.001 mg/kg. Recovery experiments were conducted on five representative agricultural products to validate the analytical method. The recovery of proposed methods ranged from 74.9% to 104.0% and relative standard deviations were less than 10%. Spinosad residues were investigated in 16 commodities collected from 22 provinces. In this study, residues on all samples were not detected.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.35-41
• /
• 1999

Background: Sleeve lobectomy of the main bronchus has been proposed to spare lung tissue in patients who cannot tolerate pneumonectomy because of impaired lung function. The purpose of this study was to evaluate whether sleeve lobectomy can preserve lung function as expected from preoperative evaluation of lung function in patients with non-small cell lung cancer. Method: Between January 1995 and March 1998, 15 patients with non-small cell lung cancer who underwent sleeve resection were evaluated. Preoperative evaluations included spirometry and quantitative lung perfusion scan, from which predicted postoperative $FEV_1$ was calculated. At least 3 months after operation follow up spirometry and bronchoscopy were performed. Predicted FEVj was compared with measured postoperative $FEV_1$. Result: Fourteen men and one woman, with median age of 58 years, were reviewed. The diagnosis was squamous cell carcinoma in 13 patients and adenocarcinoma of lung in 2 patients. Our results showed a excellent preservation of pulmonary function after sleeve lobectomy. Correlation between the predicted (mean, $2180{\pm}570mL$) and measured $FEV_1$ (mean, $2293{\pm}499mL$) was good(r=0.67, P<0.05). Furthermore, patient with low $FEV_1$ (<2L) showed improved lung function after sleeve lobectomy. Conclusion: These findings indicated a complete recovery of the reimplanted lung lobes after sleeve lobectomy. Therefore, this technique could be safely used in lung cancer patients with impaired lung function.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.185-205
• /
• 2010

Climate change vulnerability assessment based on local conditions is a prerequisite for establishment of climate change adaptation policies. While some studies have developed a methodology for vulnerability assessment at the national level using statistical data, few attempts, whether domestic or overseas, have been made to develop methods for local vulnerability assessments that are easily applicable to a single city. Accordingly, the objective of this study was to develop a conceptual framework for climate change vulnerability, and then develop a general methodology for assessment at the regional level applied to a single coastal city, Mokpo, in Jeolla province, Korea. We followed the conceptual framework of climate change vulnerability proposed by the IPCC (1996) which consists of "climate exposure," "systemic sensitivity," and "systemic adaptive capacity." "Climate exposure" was designated as sea level rises of 1, 2, 3, 4, and 5 meter(s), allowing for a simple scenario for sea level rises. Should more complex forecasts of sea level rises be required later, the methodology developed herein can be easily scaled and transferred to other projects. Mokpo was chosen as a seaside city on the southwest coast of Korea, where all cities have experienced rising sea levels. Mokpo has experienced the largest sea level increases of all, and is a region where abnormal high tide events have become a significant threat; especially subsequent to the construction of an estuary dam and breakwaters. Sensitivity to sea level rises was measured by the percentage of flooded area for each administrative region within Mokpo evaluated via simulations using GIS techniques. Population density, particularly that of senior citizens, was also factored in. Adaptive capacity was considered from both the "hardware" and "software" aspects. "Hardware" adaptive capacity was incorporated by considering the presence (or lack thereof) of breakwaters and seawalls, as well as their height. "Software" adaptive capacity was measured using a survey method. The survey questionnaire included economic status, awareness of climate change impact and adaptation, governance, and policy, and was distributed to 75 governmental officials working for Mokpo. Vulnerability to sea level rises was assessed by subtracting adaptive capacity from the sensitivity index. Application of the methodology to Mokpo indicated vulnerability was high for seven out of 20 administrative districts. The results of our methodology provides significant policy implications for the development of climate change adaptation policy as follows: 1) regions with high priority for climate change adaptation measures can be selected through a correlation diagram between vulnerabilities and records of previous flood damage, and 2) after review of existing short, mid, and long-term plans or projects in high priority areas, appropriate adaptation measures can be taken as per this study. Future studies should focus on expanding analysis of climate change exposure from sea level rises to other adverse climate related events, including heat waves, torrential rain, and drought etc.

• 대한공업교육학회지
• /
• v.32 no.1
• /
• pp.134-152
• /
• 2007

This study deals with the development of computer program which can restrict students to access to the unallowable web sites during the Internet based class. Our suggested program can find the student's access list to the unallowable sites, display it on the teacher's computer screen. Through the limitation of the student's access, teacher can enhance the efficiency of class and fulfill his educational purpose for the class. The use of our results leads to the effective and safe utilization of the Internet as the teaching tools in the class. Meanwhile, the typical method is to turn off the LAN (Local Area Network) power in order to limit the student's access to the unallowable web sites. Our program has been developed on the Linux operating systems in the small network environment. The program includes following five functions: the translation function to change the domain name into the IP(Internet Protocol) address, the search function to find the active students' computers, the packet snoop to capture the ongoing packets and investigate their contents, the comparison function to compare the captured packet contents with the predefined access restriction IP address list, and the restriction function to limit the network access when the destination IP address is equal to the IP address in the access restriction list. Our program can capture all passing packets through the computer laboratory in real time and exactly. In addition, it provides teacher's computer screen with the all relation information of students' access to the unallowable sites. Thus, teacher can limit the student's unallowable access immediately. The proposed program can be applied to the small network of the elementary, junior and senior high school. Our research results make a contribution toward the effective class management and the efficient computer laboratory management. The related researches provides teacher with the packet observation and the access limitation for only one host, but our suggested program provides teacher with those for all active hosts.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.117-128
• /
• 2003

Software usability is a characteristic of the software that is decided based on learnability, effectiveness, and satisfaction when it is evaluated. The usability is a main factor of the software quality. A software has to be continuously improved by taking guidelines that comes from the usability evaluation. Usability factors may vary among the different software products and even for the same factor, the users may have different opinions according to their experience and knowledge. Therefore, a usability evaluation process must be developed with the consideration of many factors like various applications and users. Existing systems such as satisfaction evaluation and performance evaluation only evaluate the result and do not perform cause analysis. And also unified evaluation items and contents do not reflect the characteristics of the products. To address these problems, this paper presents a evaluation model that is based on the mental model of user and the problems, this paper presents a evaluation model that is based on the mental model of user and the emotion of users. This model uses evaluation factors of the user task which are extracted by analyzing usage of the target product. In the mental model approach, the conceptual model of designer and the mental model of the user are compared and the differences are taken as a gap also reported as a part to be improved in the future. In the emotional factor approach, the emotional factors are extracted for the target products and evaluated in terms of the emotional factors. With this proposed method, we can evaluate the software products with customized attributes of the products and deduce the guidelines for the future improvements. We also takes the GUI framework as a sample case and extracts the directions for improvement. As this model analyzes tasks of users and uses evaluation factors for each task, it is capable of not only reflecting the characteristics of the product, but exactly identifying the items that should be modified and improved.