• Research in Mathematical Education
• /
• v.15 no.2
• /
• pp.197-208
• /
• 2011

By using the recording and quantitative analysis of two videos about "The multiplication and division of the Fractions" and the "Flanders Interaction Analysis System," we classified the teachers' language of instruction in algebra classroom and also analysis the language of instruction in the different teaching process. The results after the analysis as follows: (1) The proportion of time was taken in teachers' language of instruction is high and vary in types, most of the teachers' language is teachers' question; (2) In the different teaching process, the proportion of time was taken in teachers' language of instruction is different; (3) Teachers attached importance to explain the example and had the similar teaching strategy, but the teachers' language is different; (4) In the practice process, teachers placed importance on exploring the tough question and its teaching strategies are different. The teachers' questions are the main teachers' language of instruction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.118-128
• /
• 2012

An attempt is given to the problem of analyzing the two-way binary attribute data using the logistic regression model in order to find a sound statistical methodology. It is demonstrated that the analysis of variance (ANOVA) may not be good enough, especially for the case that the proportion is very low or high. The logistic transformation of proportion data could be a help, but not sound in the statistical sense. Meanwhile, the adoption of generalized least squares (GLS) method entails much to estimate the variance-covariance matrix. On the other hand, the logistic regression methodology provides sound statistical means in estimating related confidence intervals and testing the significance of model parameters. Based on simulated data, the efficiencies of estimates are ensured with a view to demonstrate the usefulness of the methodology.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.25-38
• /
• 2013

In this paper, we survey and analyze the characteristics of the special health and safety education in the construction industry, and provides a few solutions. In particular, the implementation of special safety and health education conducted a study to target the construction site of heavy chemical plant many domestic. If you look at the results of research and analysis, problems of special health and safety education that are currently being conducted in many cases, the proportion of respondents who do not know the special safety and health education is very high, workers of the scene, this education it is possible to know that the proportion of respondents answered to have the experience that are submitted to the work while not subject to are operated poorly in the field of special health and safety education high. Finally, improve the quality of the most important education has to be done on a priority basis that fixing the safety education system systematically in line with the actual situation in the field and the use of specialized external agency.

• Journal of Fisheries and Marine Sciences Education
• /
• v.22 no.4
• /
• pp.553-565
• /
• 2010

The paper aims to evaluate the quality of fisheries census statistic and to provide some desirable directions and improvements for the future fisheries census, conducted by the Government. For the quality diagnosis of fisheries census statistic, specific processes of fisheries census and statistical qualities of each dimension are surveyed and evaluated by a Government's practician, two external examiners and a research group. Results show that census design, data analysis and quality control are evaluated relatively low in specific processes, and accessibility and comparability are evaluated relatively lower than relevance, accuracy, timeliness and consistency in statistical qualities. For minimizing the sampling errors, the probability proportion method should be employed in sampling methods from currently simple sampling method. In addition, fisheries census statistic is desirable to include and compare with those of different countries for consumer oriented data system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.253-259
• /
• 1996

The purpose of this study is to investigate the fundamental properties of polyurethan concrete. Polyurethane must be expanded by means of a blowing agent during polymerization. Chemical blowing is caused by the reaction water with isocyanate. Binder system for polyurethane concrete is based on polyol and isocyanate with catalyst, surfactant, and methyl chloride. Polyurethane concretes are prepared with various grading of aggregate, and tested for compressive, flexural strengths, flow test, foaming multiple proportion, working life, condition of surface, distirbution of aggregate. From the test results, the foaming of polyurethane concretes are affceted by amount and grading of aggregate. Workability increases with raising amount of methy chloride and working life reduced according to amount of catalyst. The mix proportion of B with methyl chloride of 1% and catalyst of 0.1g for polyurethane concrete is recommended in consideration of strengths, condition of surface and balance between cost and performance.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.4
• /
• pp.369-376
• /
• 1988

A consumer survey(2, 251 residents) on marketed kimchi products in Seoul and near Seoul Area were investigated for marketablity and quality improvement of kimchi. The results obtained as follow. 1. The proportion of subjects who has bought the marketed kimchi products was 24%, some factors(ages, type of housing, family system, income) were investigated. 2. The major motivation season and favorite kinds of kimchi for purchasing the products were investigated. And Subjects bought the needed amount for 1 day at hygienic store. 3. Subjects prefered the taste of kimchi which is medium level in sour, sweet, salty and hot. The most urgent improvement for the marketed kimchi is the sanitation. If marketed kimchi were improved over the aspects, the proportion of subjects who would buy the products was 54%.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.121-129
• /
• 2005

In this paper, we consider a periodic preventive maintenance(PM) policy in which each PM reduces the hazard rate of amount proportional to the failure intensity, which increases since the last PM and slows down the wear-out speed to that of new one. And the proportion of reduction in hazard rate decreases with the number of PMs. Our model is similar to $ARI_1$ proposed by Doyen and Gaudoin(2004) in the sense of reduction of hazard rate. Our model has totally different wear-out pattern of hazard rate after PM's, however, and the proportion of reduction depends on the number of PM's. Assuming that the system undergoes only minimal repairs at failures between PM's, the expected cost rate per unit time is obtained. The optimal number N of PM and the optimal period x, which minimize the expected cost rate per unit time are discussed. Explicit solutions for the optimal periodic PM are given for the Weibull distribution case.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.455-463
• /
• 2021

This study investigated the biomass content of fluff type SRF(Solid refuse fuel) operated in B city according to the physical composition. As a result of analyzing the physical composition of SRF, it was investigated that papers 25.2%, fiber 15.1%, vinyl·plastics 42.6%, woods 9.4%, rubbers 1.5%, diapers 3.2% and incombustibles 3.0%. The average of ash and combustible content of SRF was 10.5% and 89.5%, and the higher the proportion of paper and wood, the lower proportion of ash. In addition, the biomass of SRF is 24.9%~58.0%, with an average of 42.6%.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1483-1488
• /
• 2005

As the development of microprocessor technology, electric power steering(EPS) system which uses an electric motor came to use a few years ago. It can solve the problems associated with hydraulic power steering. The motor only operates when steering assistance is needed, so it can save fuel and can reduce weight and cost by eliminating hydraulic pump and piping. As one of performance criteria of EPS systems, the transmissibility from road wheel load to steering wheel torque is considered in this paper. The transmissibility can be studied by fixing the steering wheel and calculating the torque needed to hold the steering wheel from road wheel load. A proportion-plus-derivative control is needed for EPS systems to generate desired static torque boost and avoid transmissibility of fluctuation. A pure proportion control can' satisfy both requirements.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1598-1607
• /
• 2006

The purpose of this study was to analyze the proportion of gathered skirts using a three-dimensional measurement system. And in this experiment, we have attempted to accumulate three-dimensional data of wearing model and find out adequate methods for analyzing shape of clothes. The experimental design consists of two factorial designs. We established three different kinds of fabrics, ratio of gathers. The measurement tool for three-dimensional model was whole body 3D scanner(Exima-WBS2H). Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. As the results show, there were different effect of gather and proportion of shapes among the measurements of width, thickness and areas made by different lines of vision in cross-sectional silhouette. And there were difference shapes of section area at each part of gathered skirts between vertical-outline silhouette and vortical-plane silhouette made by gathering conditions. And also the cross-sectional silhouettes and vertical silhouettes were related to shape of clothes.