• 제목/요약/키워드: Property distribution

검색결과 1,321건 처리시간 0.029초

스페이서 가터 스프링 코일 X-750 소재 정밀 조직 분석 방법 (Microstructure characterization technique of spacer garter spring coil X-750 material)

  • 진형하;류이슬;이경근
    • 한국압력기기공학회 논문집
    • /
    • 제17권2호
    • /
    • pp.109-118
    • /
    • 2021
  • In the periodic surveillance material test for the spacer component of fuel channel assembly in CANDU, a microstructural characterization analysis is required in addition to the mechanical property evaluation test. In this study, detailed microstructure analysis and simple mechanical property evaluation of archive spacer parts were conducted to indirectly support the surveillance test and assist in the study of spacer material degradation. We investigated the microstructural characteristics of the spacer garter spring coil through comparative analysis with the plate material. The main microstructure characteristics of the garter spring coil X-750 are represented by the fine grain size distribution, the ordering phase distribution developed inside the matrix, the high dislocation density inside the grains, and the arrangement of coarse carbides. In addition, the yield strength of the garter spring coil X-750 was indirectly evaluated to be approximately 1 GPa. We also established an analytical method to elucidate the microstructural evolution of the radioactive spacer garter spring coil X-750 based on Canadian research experiences. Finally, we confirmed the measurement technique for helium bubble formation through TEM examination on the helium implanted X-750 material.

병행수입 활성화 방안에 관한 연구 (A Study on the Plans for Activating Parallel Importation)

  • 강흥중;위상우
    • 무역학회지
    • /
    • 제42권6호
    • /
    • pp.27-50
    • /
    • 2017
  • 본 연구는 국내 수입물가 안정을 위한 정부의 유통 다변화 정책 중 하나인 병행수입 활성화 정책에 대하여 소비자가 체감할 수 있는 실질적인 병행수입 활성화 방안을 제시하고자 하였다. 기존 병행수입 관련 선행연구는 지식재산권(Intellectual Property)과 관련된 법학적 측면에서 이루어졌으나, 무역의 관점에서 병행수입을 통한 경제적 측면, 소비자 후생 등에 관한 연구를 진행하였다. 연구 결과 현행 병행수입제도는 보이지 않는 정부 규제, 유통시장 구조에 따른 한계 요인이 있었으며, 이를 극복하기 위한 정책 제안, 유통구조 변화 등 실질적인 방안을 제시하였다.

  • PDF

수계에 인접한 목조건축물의 생물분포 모니터링 연구 - 여주 신륵사를 중심으로 - (Monitoring on Biological Distribution Around Historical Wooden Buildings Adjacent to River - With the Case Study of Silleuksa Temple, Yeoju City?-)

  • 김시현;이현주;이민영;정선혜;정용재
    • 보존과학회지
    • /
    • 제33권4호
    • /
    • pp.267-274
    • /
    • 2017
  • 여주 신륵사는 남한강과 인접하여 습도가 높고 안개일수가 많으며 산림과 인접하여 생물피해가 우려되는 곳이다. 이에 문화재 보존관리 계획 수립에 필요한 기초자료 확보를 위해 신륵사 목조건축물의 생물분포와 주변 산림의 흰개미 분포를 3년 동안 모니터링 하였다. 그 결과 문화재 가해곤충인 구멍벌이 지속적으로 확인되었으며, 계절과 연차별 곤충분포가 다양하게 나타났다. 이는 대상지의 입지특성과 당해 연도의 기후 변화가 함께 반영되었기 때문으로 추정된다. 배후 산림에서는 전체적으로 흰개미 군체가 확인되었고, 분포 양상은 매년 다르게 나타났다. 미생물 조사 결과 건물의 출입 여부에 따라 종별 분포와 오염도가 다르게 나타났으며, 목재부후균도 분리 동정되었다. 따라서 보존환경과 생물분포에 대한 지속적인 모니터링과 함께 목재가해생물종의 추가적인 유입을 막기 위한 조치가 필요하다.

웹 클러스터 시스템의 효율적인 동적 작업분배 (An Efficient Dynamic Load Distribution for the Web Cluster Systems)

  • 서경룡
    • 한국멀티미디어학회논문지
    • /
    • 제7권8호
    • /
    • pp.1097-1106
    • /
    • 2004
  • 전형적인 웹 클러스터 시스템은 여러 대의 실제서버와 클라이언트에 작업을 분배하는 가상서버로 구성된다. 본 논문에서는 고 가용성 웹 클러스터를 구성하기 위한 부하예측방식을 사용한 동적 작업 분배 방식을 제안하였다. 가상서버는 적절한 주기로 상태요청 메시지를 실제서버에 전송하여 부하 상태를 알아낸다. 하지만 작업분배 과정에서 실제의 부하상태의 변화를 정확히 알 수 없으므로 클라이언트의 요청에 대하여 실제서버의 부하상태를 예측하여 최소 부하상태 인 서버에 작업을 할당한다. 제안된 작업 분배방식은 실제서버의 부분적 고장과 무관하게 동작하며 부분적인 고장이 발생하여도 전체 시스템에 영향을 주지 않고 계속적인 서비스를 제공한다. 또한 다양한 성능평가를 수행하여 실제서버 확장에 따른 성능확장능력과 작업처리능력이 향상되었음을 보였다.

  • PDF

베타 확률분포를 이용한 입자 떼 최적화 알고리즘의 성능 비교 (On the Comparison of Particle Swarm Optimization Algorithm Performance using Beta Probability Distribution)

  • 이병석;이준화;허문범
    • 제어로봇시스템학회논문지
    • /
    • 제20권8호
    • /
    • pp.854-867
    • /
    • 2014
  • This paper deals with the performance comparison of a PSO algorithm inspired in the process of simulating the behavior pattern of the organisms. The PSO algorithm finds the optimal solution (fitness value) of the objective function based on a stochastic process. Generally, the stochastic process, a random function, is used with the expression related to the velocity included in the PSO algorithm. In this case, the random function of the normal distribution (Gaussian) or uniform distribution are mainly used as the random function in a PSO algorithm. However, in this paper, because the probability distribution which is various with 2 shape parameters can be expressed, the performance comparison of a PSO algorithm using the beta probability distribution function, that is a random function which has a high degree of freedom, is introduced. For performance comparison, 3 functions (Rastrigin, Rosenbrock, Schwefel) were selected among the benchmark Set. And the convergence property was compared and analyzed using PSO-FIW to find the optimal solution.

역-레일리와 레일리 분포 특성을 이용한 유한고장 NHPP모형에 근거한 소프트웨어 신뢰성장 모형에 관한 비교연구 (A Comparative Study of Software finite Fault NHPP Model Considering Inverse Rayleigh and Rayleigh Distribution Property)

  • 신현철;김희철
    • 디지털산업정보학회논문지
    • /
    • 제10권3호
    • /
    • pp.1-9
    • /
    • 2014
  • The inverse Rayleigh model distribution and Rayleigh distribution model were widely used in the field of reliability station. In this paper applied using the finite failure NHPP models in order to growth model. In other words, a large change in the course of the software is modified, and the occurrence of defects is almost inevitable reality. Finite failure NHPP software reliability models can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the inverse Rayleigh and Rayleigh software reliability growth model, which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination($R^2$), for the sake of efficient model, were employed. In order to insurance for the reliability of data, Laplace trend test was employed. In many aspects, Rayleigh distribution model is more efficient than the reverse-Rayleigh distribution model was proved. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can helped.

The Relationship between Residential Distribution of Immigrants and Crime in South Korea

  • Park, Yoonhwan
    • 유통과학연구
    • /
    • 제16권7호
    • /
    • pp.47-56
    • /
    • 2018
  • Purpose - This study aims to not only investigate spatial pattern of immigrants' residence and crime occurrences in South Korea, but shed light on how geographic distribution of immigrants and immigrant segregation affect crime rates. Research design, data, and methodology - Th unit of analysis is Si-Gun-Gu municipal level entities of South Korea. The crime data was obtained by Korea National Police Agency and two major types(violence and property) of crime were measured. Most demographic, social, and economic variables were derived from Korean Census Data in 2015. In order to examine spatial patterns of immigrants' distribution and crime rates in South Korea, the present study utilized GIS mapping technique and Exploratory Spatial Data Analysis(ESDA) tools. The causal linkage was investigated by a series of regression models using STATA. Results - Spatial inequality between urban metropolitan vs rural areas was visualized by mapping. Assuming large Moran's I value, spatial autocorrelation appeared to be quite strong. Several neighborhood characteristics such as residential stability and economic prosperity were found to be important factors leading to crime rate change. Residential distribution and segregation for immigrants were negatively significant in the regression models. Conclusions - Unlike the traditional arguments of social disorganization theory, immigrant segregation appeared to reduce violent crime rate and the high proportion of immigrants also turned out to be a crime prevention factor.

식물잎의 표면형상 및 마이크로-스케일에서의 마찰 특성 (Surface Characteristics and Micro-Scale Friction Property of Natural Surface)

  • 윤의성;김홍준;아르빈드싱;김진석
    • Tribology and Lubricants
    • /
    • 제22권5호
    • /
    • pp.237-242
    • /
    • 2006
  • Surfaces found in nature, including biological surfaces have been providing inspiration to modify/fabricate artificial surfaces as solutions for tribological applications. As an example, the concept of 'lotus-effect' has motivated tribologists world wide to modify/fabricate surfaces for enhanced tribological performance. These was done by creating nano/micro-scale asperities on various surfaces using ion beam milling and ion-beam assisted roughening. In order to understand the attributes of natural surfaces, which are inspirational to tribologists, we characterized the surface of two natural surfaces-Nelumbo nucifera (lotus) and Colocasia esculenta leaves. Further, we evaluated their micro-scale friction property, both in their fresh and dried conditions. The characterization of surfaces was conducted using a confocal microscope and SEM, which involved the evaluation of size and distribution of protuberances. The micro-scale friction property was evaluated using a ball-on-flat type micro-tribo tester, under reciprocating motion. A soda lime glass ball (2 mm diameter) was used in these tests. Tests were conducted at the applied normal load of $3000{\mu}N$, at a sliding speed of 1 mm/sec for a scan length of 3 mm. All experiments were conducted at ambient temperature ($24{\pm}1^{\circ}C}$) and relative humidity ($45{\pm}5%$). It was observed that the friction behaviour of the natural surfaces was influenced by their surface characteristics (morphology and distribution of protuberances) and also by the condition (fresh or dried) in which they were tested.

'플라스틱'에 대한 초등 예비교사들의 인식 조사 - 플라스틱의 비극성 성질 중심으로 - (Elementary Preservice Teachers' Conceptions about 'Plastics' - Focusing on Non-Polar Property -)

  • 김한제;장명덕;정용재
    • 한국초등과학교육학회지:초등과학교육
    • /
    • 제33권2호
    • /
    • pp.401-414
    • /
    • 2014
  • The purpose of this study is to investigate the elementary preservice teachers' conceptions about 'plastics' focusing on non-polar property from a National University of Education. For the study, the views about plastics, relative shapes of a water droplet on plastic or glass material, and relative shapes of water surface in the plastic or glass measuring cylinder were surveyed from the preservice teachers. And the responses were analyzed based on the patterns. The results from the study are as follows: First, most preservice teachers were well aware of the plastic products which are used in daily life. Second, the responses concerning the reason why plastics can be used commonly were divided into 2 categories with 14 sub-level groups. However relatively few preservice teachers mentioned regarding 'chemical stability' and 'conductivity', which are associated with the plastics' non-polar property. Third, it was found that 50 participants (30.1%) had 'Scientific conception (Sc)', 38 (22.9%) had 'Partial-scientific conception (Ps)', 66 (39.8%) had 'Misconception (Mc)', and 12 (7.2%) had 'No conception (Nc)' on the subject of the relative shapes of a water droplet. Fourth, the distribution patterns and the ratio of the preservice teachers' conception on the survey question 3 concerning the relative shapes of water surface were quite similar to those of the survey question 2. So it was concluded that overall understanding level of the preservice teachers was pretty low on the subjects of the relative polarities of the plastic, glass, and water as well as their interactions. Fifth, the distribution percentile of 'Sc'/'Ps'/'Mc'/'Nc' was not related with the gender but highly correlated with preservice teachers' academic field and their science subjects taken in high school. Based on the results from the study, some educational guidelines were suggested.

바이오디젤 산화안정제가 물성 및 배출가스에 미치는 영향 연구 (The Study for Effect of Biodiesel Antioxidants on Properties and Emissions)

  • 강형규;송호영;박수열;오상기;나병기
    • 한국자동차공학회논문집
    • /
    • 제22권2호
    • /
    • pp.67-75
    • /
    • 2014
  • Biodiesel as alternative fuels has been widely studied due to biodiesel merits such as lower sulfur, lower aromatic hydrocarbon and higher oxygen content. But biodiesels could be easily oxidized by several conditions. In this study, various antioxidants such as propyl gallate, TBHA, TBHQ, DTBHQ, butyl-amin, aniline and pyrogallol were added in the biodiesel produced by the used cooking oil, then the material property test and the vehicle emissions test were conducted in accordance with test method. From the results of material property test, all antioxidants were suitable for the quality standard of density and kinematic viscosity, but Propyl gallate and Pyrogallol, as a type of Gallate additives, showed that the result of TAN increased rapidly according to the increase of the amount of additives. In the oxidation stability test, TBHQ, Butyl-amine and Aniline showed the excellent oxidation stability. Also, when considering the material property test, TBHQ was verified to the most excellent additives. In case of the vehicle emissions test, the testing was conducted by using the biodiesel added by TBHQ and was conducted by using two light duty diesel vehicles suitable for the EURO 4 and EURO 5 emission regulation. The result of testing showed that when the TBHQ was added, the amounts of CO, NOx and NMHC+NOx were decreased but the amount of $CO_2$ was increased.