• Steel and Composite Structures
• /
• v.26 no.2
• /
• pp.139-150
• /
• 2018

In this paper, two kinds of buckling restrained braces (BRBs) are designed to improve the mechanical properties and fatigue life, the reserved gap and viscoelastic filler with high energy dissipation capacity are employed as the sliding element, respectively. The fatigue life of BRBs considering the effect of sliding element is predicted based on Manson-Coffin model. The property tests under different displacement amplitudes are carried out to evaluate the mechanical properties and fatigue life of BRBs. At last, the finite element analysis is performed to study the effects of the gap and viscoelastic filler on mechanical properties BRBs. Experimental and simulation results indicate that BRB employed with viscoelastic filler has a higher fatigue life and more stable mechanical property compared to BRB employed with gap, and the smaller reserved gap can more effectively improve the energy dissipation capacity of BRB.

• IT SoC Magazine
• /
• s.16
• /
• pp.10-11
• /
• 2006

정보통신부가 주최하고 정보통신연구진흥원, IT-SoC협회, 한국전자통신연구원이 주관하는 ‘IT-SoC Fair 2006’이 지난 11월 1일~2일 양일간 COEX 인도양홀에서 개최되었다. 이 행사는 Fabless 반도체업체들이 중심이 되는 SoC(System on Chip)/IP(Silicon Intellectual Property)전문 전시회로 IT 핵심부품산업을 진흥하고자 하는 취지로 매년 개최되는 행사이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.406-413
• /
• 2010

To enhance the yield and bioactivity of hot-water extract from herbal medicine, Astragalus membranaceus was hydrolyzed with carbohydrases, such as ClariSEB and Fungamyl. After hot-water extracts were prepared from each hydrolysate (HW-C/F), physicochemical property, antioxidant activity and sensory property were evaluated. The solid content ($^{\circ}Brix$) of HW-C/F was higher than hot-water extract from A. membranaceus no treated enzyme (control). Although pH of HW-C/F was lower than that of the control, the acidity was higher. Lightness of Hunter's color values was increased in HW-C/F whereas redness and yellowness were decreased. The contents of reducing sugar, flavonoid and polyphenol of HW-C/F were higher than the control but the content of ascorbic acid was not different from control. The inhibitory activity of HW-C/F against lipid peroxidation was slightly higher than control, but DPPH radical scavenging, ABTS reducing, metal chelating activities were significantly increased by HW-C/F. The sensory evaluation also revealed that the sensory panelists preferred HW-C/F to that of control. Therefore, hydrolysis by carbohydrases for preparation of hot-water extract from A. membranaceus is one of the good methods to improve antioxidative activity and sensory property of hot-water extract.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.663-670
• /
• 2020

A study on mechanical property characterization and modeling technique was carried out to approximate the behaviour of structures with 2.5D C/SiC material. Several tensile tests were performed to analyze the behaviour characteristics of the 2.5D C/SiC material and elastic property was characterized by applying a mathematical homogenization and a modified rule of mixture. SiC matrix representing the elasto-plastic behavior approximates as a bilinear function. Then the equivalent yield strength and equivalent plastic stiffness were calculated by minimizing errors in experiment and approximation. RVE(Representative Volume Element)was defined from the fiber and matrix configuration of 2.5D C/SiC and a process of calculating the effective stiffness matrix by applying the modified rule of mixture to RVE was implemented in the ABAQUS User-defined subroutine. Finite element analysis was performed by applying the mechanical properties of fiber and matrix calculated based on the proposed process, and the results were in good agreement with the experimental results.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.2
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.2 s.56
• /
• pp.33-38
• /
• 2005

Chitosan is a dietary fiber because of a linear polysaccharide composed of $\beta-(1{\rightarrow}4)$-linked 2-amino-2-deoxy-D-glucopyranose. In this study, control release system of vitamin C has been estimated in chitosan molecular network as a vitamin C carrier of controlled release. The amount of released vitamin C were decreased in higher amount of chitosan concentration. Especially, vitamin C were slowly released from chitosan solution in dialysis membrane when compared with vitamin C solution alone in dialysis membrane. These result assumed that chitosan driving force is dependent on chitosan molecular weight and cationic property of amino group with anionic property of vitamin C.

• Communications of the Korean Mathematical Society
• /
• v.24 no.1
• /
• pp.127-144
• /
• 2009

Let f be a diffeomorphism of a compact $C^{\infty}$ manifold, and let p be a hyperbolic periodic point of f. In this paper we introduce the notion of $C^1$-stable inverse shadowing for a closed f-invariant set, and prove that (i) the chain recurrent set $\cal{R}(f)$ of f has $C^1$-stable inverse shadowing property if and only if f satisfies both Axiom A and no-cycle condition, (ii) $C^1$-generically, the chain component $C_f(p)$ of f associated to p is hyperbolic if and only if $C_f(p)$ has the $C^1$-stable inverse shadowing property.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.162-165
• /
• 2006

In this study, Liquid Phase Sintered SiC (LPS-SiC) was fabricated by hot pressing method with $\beta$-SiC powder whose a particle size is 30nm and less on the average in argon condition at 1780 and $1800^{\circ}C$ under 20MPa. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of particle-size and temperature on $SiO_2$, LPS-SiC was fixed $Al_2O_3$, $Y_2O_3$ and then particle-size of $SiO_2$ were changed as two kinds. The system of particle-size and temperature on sintering additives which affects a property of sintering os well os the influence depending on particle-size and temperature of sintering additives were investigated by measurement of sintering properties. Such as measurement of sintering density, vikers hardness and observing of microstructure were investigated to make sure of the optimum condition which is about matrix of $SiC_f/SiC$ composites. Base on the composition of sintering additives, microstructure and sintering property correlation, the effect of particle-size of sintering additives are discussed. An experimental method to investigate the dynamic characteristics of bums in extreme environmental condition is established.

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.94-98
• /
• 2011

Ballistic property of Heracron/phenol composites was evaluated as a function of polyurethane (PU) type and their loadings. First, prepregs of phenol and polyurethane were prepared by spray coating on Heracron fabric and then they were utilized to prepare composite by varying their ratio. Next, they were consolidated at $150^{\circ}C$ for 25 min at $150kg/cm^2$ pressure and then ballistic property was measured with 1.1 g FSP (22 cal). V50 was evaluated interms of polyurethane type and ratio of phenol/PU prepreg.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.10-15
• /
• 2006

In this article, effect of the dyeing and mechanical properties were investigated on the polyester ultramicro fiber(UMF) and knitted fabric varying fiber fineness(0.01d and 0.05d). By a treatment with NaOH solution, sea-ingredient was removed and polyester micro-fiber was revealed. The dyeing, build-up and fastness properties of the fiber and fabrics were observed. We used C.I. Disperse Red 60 and Blue 56 for dyeing property and eight Lumacron dyes for build-up property and colorfastness. At low temperature dyeing($100^{\circ}C$), the dyeing rate of 0.01d-polyester UME increased more than that of 0.05d-polyester UMF with Disperse Red 60 and Blue 56 whereas dyeing rate of 0.05d-polyester UMF were increased more than that of 0.01d-polyester UMF at high temperature($120^{\circ}C$), The colorfastnesses of the 0.05d-fiber knitted fabric such as washing, rubbing and light was higher than those of the 0.01d-fiber knitted fabric.