• Steel and Composite Structures
• /
• 제26권2호
• /
• pp.139-150
• /
• 2018

In this paper, two kinds of buckling restrained braces (BRBs) are designed to improve the mechanical properties and fatigue life, the reserved gap and viscoelastic filler with high energy dissipation capacity are employed as the sliding element, respectively. The fatigue life of BRBs considering the effect of sliding element is predicted based on Manson-Coffin model. The property tests under different displacement amplitudes are carried out to evaluate the mechanical properties and fatigue life of BRBs. At last, the finite element analysis is performed to study the effects of the gap and viscoelastic filler on mechanical properties BRBs. Experimental and simulation results indicate that BRB employed with viscoelastic filler has a higher fatigue life and more stable mechanical property compared to BRB employed with gap, and the smaller reserved gap can more effectively improve the energy dissipation capacity of BRB.

• IT SoC Magazine
• /
• 통권16호
• /
• pp.10-11
• /
• 2006

정보통신부가 주최하고 정보통신연구진흥원, IT-SoC협회, 한국전자통신연구원이 주관하는 ‘IT-SoC Fair 2006’이 지난 11월 1일~2일 양일간 COEX 인도양홀에서 개최되었다. 이 행사는 Fabless 반도체업체들이 중심이 되는 SoC(System on Chip)/IP(Silicon Intellectual Property)전문 전시회로 IT 핵심부품산업을 진흥하고자 하는 취지로 매년 개최되는 행사이다.

• 한국식품영양과학회지
• /
• 제39권3호
• /
• pp.406-413
• /
• 2010

황기 추출액의 수율 및 생리적 기능성을 향상시키기 위하여 황기에 효소를 첨가하여 시간별로 가수분해 시킨 후 가열처리하고 여과시킨 추출액에 대하여 이화학적, 항산화 활성 및 관능적 평가를 측정하였다. 효소처리 황기 추출액의 $^{\circ}Brix$의 변화는 대조군보다 ClariSEB 및 Fungamyl 처리 시 증가하였으며 pH 및 산도는 효소처리에 의하여 약간 낮은 pH와 높은 산도를 보였다. 색상변화에서는 ClariSEB 및 Fungamyl 처리 시 lightness가 증가하였으며 redness와 yellowness는 감소하였다. 환원당, flavonoid 및 polyphenol 화합물 함량은 효소처리에 의하여 함량이 증가하였으나 ascorbic acid는 대조군과 유사하였다. 황기 추출액의 지질과 산화 억제능은 효소처리 시 억제능이 약간 증가하는 것으로 나타났고 DPPH 항산화 활성, ABTS 항산화 활성 및 금속이 온 제거능에서는 ClariSEB 및 Fungamyl 처리 시 증가하였으나 환원력은 대조군과 유사하였다. 또한 황기 추출액에 대한 관능검사 결과 전반적으로 효소처리를 하지 않은 대조군에 비하여 효소처리 시 기호도 면에서 우수한 것으로 나타났다.

• 한국항공우주학회지
• /
• 제48권9호
• /
• pp.663-670
• /
• 2020

2.5D C/SiC를 적용한 구조물의 거동 특성을 유한요소해석으로 근사하기 위해 기계적 물성 특성화와 모델링 기법에 관한 연구를 수행하였다. 2.5D C/SiC 소재의 거동 특성을 분석하기 위해 인장시험을 수행하였고 수학적 균질화 기법과 수정된 혼합 법칙을 적용하여 2.5D C/SiC를 구성하는 섬유와 기지의 탄성 물성을 정의하였다. 탄소성 거동을 나타내는 기지는 소성 영역의 거동을 bilinear 함수로 근사하고 시험과 해석의 오차를 최소화하여 등가 항복 강도와 등가 소성 강성을 계산하였다. 그리고 2.5D C/SiC의 RVE를 정의하고 수정된 혼합 법칙을 적용하여 유효강성행렬을 계산하는 과정을 ABAQUS의 User-defined subroutine을 통해 구성하였다. 제안된 과정을 바탕으로 정의된 섬유와 기지의 기계적 물성을 적용하여 유한요소해석을 수행한 결과는 시험의 거동을 잘 근사하고 있음을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.

• 환경위생공학
• /
• 제20권2호
• /
• pp.33-38
• /
• 2005

Chitosan is a dietary fiber because of a linear polysaccharide composed of $\beta-(1{\rightarrow}4)$-linked 2-amino-2-deoxy-D-glucopyranose. In this study, control release system of vitamin C has been estimated in chitosan molecular network as a vitamin C carrier of controlled release. The amount of released vitamin C were decreased in higher amount of chitosan concentration. Especially, vitamin C were slowly released from chitosan solution in dialysis membrane when compared with vitamin C solution alone in dialysis membrane. These result assumed that chitosan driving force is dependent on chitosan molecular weight and cationic property of amino group with anionic property of vitamin C.

• 대한수학회논문집
• /
• 제24권1호
• /
• pp.127-144
• /
• 2009

Let f be a diffeomorphism of a compact $C^{\infty}$ manifold, and let p be a hyperbolic periodic point of f. In this paper we introduce the notion of $C^1$-stable inverse shadowing for a closed f-invariant set, and prove that (i) the chain recurrent set $\cal{R}(f)$ of f has $C^1$-stable inverse shadowing property if and only if f satisfies both Axiom A and no-cycle condition, (ii) $C^1$-generically, the chain component $C_f(p)$ of f associated to p is hyperbolic if and only if $C_f(p)$ has the $C^1$-stable inverse shadowing property.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.162-165
• /
• 2006

In this study, Liquid Phase Sintered SiC (LPS-SiC) was fabricated by hot pressing method with $\beta$-SiC powder whose a particle size is 30nm and less on the average in argon condition at 1780 and $1800^{\circ}C$ under 20MPa. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of particle-size and temperature on $SiO_2$, LPS-SiC was fixed $Al_2O_3$, $Y_2O_3$ and then particle-size of $SiO_2$ were changed as two kinds. The system of particle-size and temperature on sintering additives which affects a property of sintering os well os the influence depending on particle-size and temperature of sintering additives were investigated by measurement of sintering properties. Such as measurement of sintering density, vikers hardness and observing of microstructure were investigated to make sure of the optimum condition which is about matrix of $SiC_f/SiC$ composites. Base on the composition of sintering additives, microstructure and sintering property correlation, the effect of particle-size of sintering additives are discussed. An experimental method to investigate the dynamic characteristics of bums in extreme environmental condition is established.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.94-98
• /
• 2011

열경화성 및 열가소성 우레탄 수지 첨가에 따른 헤라크론/페놀수지 복합재료의 방탄성능 변화를 고찰하였다. 먼저 페놀 또는 우레탄 수지를 헤라크론 직조섬유에 스프레이 코팅하여 프리프레그를 제조하고, 이들의(페놀/우레탄) 비율을 변화시켜 16층의 복합재료를 $150^{\circ}C$에서 $150kg/cm^2$의 압력으로 25 min간 성형하여 제조하였다. 방탄성능은 1.1 g 모의파편탄(22 cal)으로 분석하였으며, 우레탄 수지의 종류 및 페놀/우레탄 프리프레그의 비율에 따른 V50 변화를 고찰하였다.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.10-15
• /
• 2006

In this article, effect of the dyeing and mechanical properties were investigated on the polyester ultramicro fiber(UMF) and knitted fabric varying fiber fineness(0.01d and 0.05d). By a treatment with NaOH solution, sea-ingredient was removed and polyester micro-fiber was revealed. The dyeing, build-up and fastness properties of the fiber and fabrics were observed. We used C.I. Disperse Red 60 and Blue 56 for dyeing property and eight Lumacron dyes for build-up property and colorfastness. At low temperature dyeing($100^{\circ}C$), the dyeing rate of 0.01d-polyester UME increased more than that of 0.05d-polyester UMF with Disperse Red 60 and Blue 56 whereas dyeing rate of 0.05d-polyester UMF were increased more than that of 0.01d-polyester UMF at high temperature($120^{\circ}C$), The colorfastnesses of the 0.05d-fiber knitted fabric such as washing, rubbing and light was higher than those of the 0.01d-fiber knitted fabric.